• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 2009

When happen the electrical facilities accident the one's diagnosis system of fault cause was constructed by FMEA method Cable accident cause is given by accident cause that can happen in each one's diagnosis and accident probability value. From the verification of system, the one's diagnosis system agreed well with result that analyzed actual state. Thus, the system is judged to be used effectively examine for accident cause of electrical facilities.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.309-312
• /
• 2008

In this paper, we investigated electric safety manager's PL recognition and accident occurrence of electric power facilities(power cable, transformer, circuit breaker) in electric installation for private use. The target of questionnaire survey is 450 electric installations for private use, 154 responded the questionnaire among these and it occupied 35.8%. Most of receiving voltage were 22.900kV. The questionnaire survey says that 58% of electric safety manager knew well about PL contents and 42% of them did not recognize about PL contents, About the PL application of electrical facility accidents, 82.4% of them must applied PL law, 5.8% of them did not need the PL law. Reason of PL application occupied 64% for stability of electrical facility and product, 19% for prevention of same accident. The accident of transformer occupied most and the power cable accident were much next. The questionnaire survey results, electric safety managers are interested in PL content. thev expected necessity of PL application about electrical accident strongly.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.304-308
• /
• 2024

In this paper, in order to analyze the PMU data of the accident section, we collected the raw data of a total of 35 PMU installed at the Yeonggwang substation and tried to find a way to analyze the data, and analyzed the data using Excel format and formula. As a result, the three-phase voltage and current data of the PMU were calculated using formulas in Excel and interpreted as effective and reactive power, and it was possible to check the effective and reactive power of the accident section through the graph to see why it was different from before the accident. As a result, it was confirmed that each power was greatly reduced in the graph of the effective and reactive power of the accident section, and it was confirmed that the loss occurred as the power of the accident section was greatly reduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.60-63
• /
• 2005

In this paper, the accidents of 6.6kV CV cable using many analysis methods such as a pattern anlysis were analyzed; the inner structure analysis; cross section analysis; SEM; EDX, etc. With the analysis and the accident reconstruction, It was possible to analyze the accident causes. For more correct assessment, another accident reconstruction and simulation with a software were required.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.394-397
• /
• 2005

In korea, the power consumption is increasing every year because of economic growth, requiring of convenience and delightfulness condition. As increasing power consumption, Private Use is steadily increasing and the rate of electrical accident is increasing. Therefore we research the electrical safety culture of our people by the survey of electrical safety. The subject to investigation is possessor, occupier of Private Use and electrical safety manager. This paper will be used to base data for the protection of electrical accident and facility accident at Private Use

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.264-267
• /
• 2006

This paper describes the accident analysis by modeling the current transformer mounting in meaium voltage metal-clad switchgear(MCSG). In analyzing the accident the reconstruction at the current transformer mounting(VCB connecting guide) has to be taken into account. The accident was modelled as a 3-phase ground fault mounting between the end plate of a high voltage lines and the safety shutter at the current transformer mounting of the VCB inside the metal clad switchgear. Since the outside maintenance of the metal clad switchgear is restricted by the enclosed compartments, its circumference has to be kept clean. Through the reconstruction results, it was confirmed that the fault of the enclosed switchboard could be reduced when the shutter made of Fe material was changed into an insulation.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1943-1947
• /
• 2016

Korea Electrical Safety Cooperation(KESCO) have provided the electrical safety speed-call service from 2007 year. Purpose of the service is to reduce discomfort of electricity use and to prevent electrical accident like as electrical fire and shock accident by providing emergency treatment service on fault of the residential electrical facilities notified in the specific house like as a lower-income group and a social welfare facility. But efficiency and economic evaluation of the electrical safety speed-call service is impossible because analysis on the quantitative effect of the service is difficult. This paper presents cost-benefit analysis method and result of the electrical safety speed-call service. The presented cost-benefit analysis method has a two-step process: the first step is to measure quantitative electrical fire prevention effect of the service by using electrical accident statistics and developing outcome analysis logic model of the service effect, and the second step is to analysis cost-benefit(B/C)of the service by calculating quantitative benefit analysis on the measured quantitative electrical fire prevention effect. The results showed that cost-benefit(B/C)of the electrical safety speed-call service is over 4 after 2010 year.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.109-115
• /
• 2009

본 논문은 백열등 부하 전기설비에서 측정한 전류 파형으로 전기사고 징후를 조기에 검출하기 위한 것이다. 첫째, 저항성 회로에서 전류 모니터의 특성을 분석하였다. 둘째, 백열등을 부하로 하는 전기설비를 구축하고, 전기설비의 일부에서 KS C IEC(Korea Standard C International Electrostatic Commission) 60112에 따라 트래킹을 발생시켜 사고를 모의하였다. 전기사고 징후는 전류 모니터로 측정한 전류파형을 분석함으로써 검출되었다. 그 결과 부하의 수에 관계없이 사고의 최종 단계인 트래킹으로 진전되어 갈수록 전류 파형에는 점점 큰 전류 펄스가 보였고 출현빈도도 더욱 높아졌다.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.8-14
• /
• 2011

The live-line works are very dangerous because of direct contacts with the distribution line or neighboring contacts. So the purpose of this study is to identify the risk factor by accident occurrence form and accident case analysis, and to suggest the quantified risk index by risk occurrence frequency and risk strength analysis. And the risk index assessment is researched by accident cases analysis on work type. Accident cases of transmission distribution line are researched based on data of the Ministry of Employment and Labor in the last ten-year period (2000~2009). In results of this paper, high risk isn't always a priority of safety measures. Risk occurrence frequency and risk strength have to be considered according to detail work types, work methods and conditions of field work. And safety management measures must be planned according to risk occurrence frequency and risk strength.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.91-97
• /
• 2009

전력케이블 사고 발생시에는 사고원인을 규명 해야하며, 본 연구에서는 FMEA 방법을 이용하여 케이블 사고에 대한 자가원인 진단 시스템을 구축하였다. 자가원인 진단 시스템은 사고당시의 데이터 입력, 픽토그래프를 통한 사고형태의 표현, FMEA 방식을 적용한 사고확률 값으로 구성되어 있으며, 각 선택에 따라 사고원인에 대한 사고가능성이 결과로 나타나게 된다. 또한 실제 케이블 사고사례의 원인분석을 통해 자가원인 진단 시스템을 검증한 결과, 이 시스템은 실제 분석결과와 잘 일치되었다.