• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3092-3098
• /
• 2011

This paper deals with analysis of measuring power dissipation when Maglev is running. With the various running scenarios for Maglev, power dissipation was measured and a comparative analysis of it and wheel-on rails were carried out. The purpose of this paper is to confirm the efficiency and economics on operation of Maglev and reflect detail design later. When the running scenarios of Maglev are the status of landing on and levitation, running at rated acceleration and deceleration and according to changes of velocity, the power dissipation was measured. The measured results are analyzed considering with apparent electric power and active power, reactive power and power factor etc. Due to the limited test track condition, it is very limited to compare and analyze Maglev and general trains. Nevertheless, It is a task of great significance to identify the efficiency and economics on operating Maglev through the results of measuring power dissipation. In the future, measuring power dissipation through more various scenarios will be carried out, and the results will be reflected the design.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.110-116
• /
• 2017

This paper proposed a new real-time parameter tracking algorithm. Unlike the convenience algorithms, the proposed real-time parameter tracking algorithm can estimate parameters through three-phase voltage and electric current without coordination transformation, and does not need information on magnetic flux. Therefore, it can estimate parameters regardless of the change according to operation point and cross-saturation effect. In addition, as the quasi-real-time parameter tracking technique can estimate parameters through the four fundamental arithmetic operations instead of complicated algorithms such as numerical value analysis technique and observer design, it can be applied to low-performance DSP. In this paper, a new real-time parameter tracking algorithm is derived from three phase equation. The validity and usefulness of the proposed inductance estimation technique is verified by simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.3
• /
• pp.299-306
• /
• 2001

It is one of the most effective methods for performance improvement of electric railway vehicle to make better the wheel-rail adhesion character. In order to research adhesion character, adhesion system is developed. The experiment system makes it possible to change various adhesion parameters. This paper studied to restrain vibration of slip speed using torque control gy means of slip speed.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.602-607
• /
• 2004

Several countries such as Japan, France and so on gradually operate double deck trains as efficient, reliable and comfortable mass transportation systems. However, the double deck trains have relatively big cross sectional areas and high mass centers that cause unsafe vehicle running performances and interface problems between the vehicles and infrastructures, and do not have enough spaces for electric equipments. Therefore, prior to operate double deck trains on the existing lines in Korea, careful investigations should be performed. In this study, we have roughly designed a double deck EMU train system for the existing lines around Seoul metropolitan area.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.748-753
• /
• 2004

Aluminum alloy is very useful material for high speed transportations due to its high strength and light weight characteristics. Especially because of a weight reduction a large extrustion of aluminum alloy carbody has been manufactured. This aluminum extruded panel is a hallow extruded panel. This shape and thickness is various by designer's sense and experience and VAW's profiles. So it is important to find an optimized shape and thickness of AEP. In this study we get the AEP's thickness to minimize a weight by applying an applying an optimization algorithm. The results of the study can be used as basic guidelines double-deck trains in the future.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1395-1401
• /
• 2010

A paradigm shift in driving system of transportation vehicle from engine to electric motor is required as the problems on air pollution and drain of petroleum resource are on the rize. Moreover while it is possible to control the motor with variable frequency driver, the application of motor in various kinds of vehicles is spread rapidly. In the paper, the effective design method of IPMSM for EV and HEV by using equivalent magnetic circuit and finite element method (FEM) is suggested. First of all, load conditions of the application are calculated. And basic design process of IPMSM is proposed with two design point. Finally, in order to verify the proposed design process, it was compared with the basic design parameter and the FEM analysis results.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.213-214
• /
• 2008

Since standardization project is composed of complicate system, such as vehicle, signal, electric power and railway, how to build management system of the project has influence on the success of the project for the first stage of the project. The computer system design tool supports to carry out requirement analysis, DB construction, and history and follow-up management efficiently. Therefore, the aim of this study is to investigate the method to optimize schema using computer system design tool.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1593-1594
• /
• 2015

본 논문에서는 진공 차단기의 투입 시 발생하는 고주파 재발호 진동현상을 모의하여 계통의 전압-주파수 특성을 분석한다. 우선 시간영역에서 차단기 투입에 따른 개폐 서지 현상을 모의하여 다중 재발호에 의한 진행파의 주파수 특성을 검토한다. 모의 결과를 통해 추정된 고주파 회로저항과 기존 전원, 고압케이블, 변압기로 구성된 고주파 재발호 진동해석용 등가 회로를 구현하고 주파수 스캔 기능을 이용하여 인가되는 전압의 주파수 변화에 따른 계통의 임피던스 크기변화를 확인한다. 끝으로, 시간 영역 및 주파수 영역에서 도출된 계통의 공진 주파수와 철도차량용 주 변압기의 공진주파수를 비교하여 내부 공진 여부에 따른 권선간 전압 확대 가능성을 논하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.876-879
• /
• 2003

본 논문은 전동차용 추진제어장치의 재점착제어에 관한 것이다. 본 연구에서는 공전검지 방법에 대하여 기술하고, 등가 관성량을 이용한 추정재점착제어에 관하여 제시한다. 서울시 6호선 국산화 전동차(609편성)와 광주도시철도 1호선 전동차에 적용하여 재점착 제어성의 우수함과 안정성을 검증 하고자 한다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1008-1013
• /
• 2008

Currently, the use of the subway system as a public transportation has been an increasing demand due to the complex transportation structure in Korea. The subway system provides on time arrival and departure, relatively comfortable riding, and convenient access in the metropolitan area. Among several areas of the operation of the subway system, the safety of subway vehicle itself is of important because the rolling stocks carry the passengers, and the safety and reliability of rolling stocks are directly affected for the safety of subway passengers. In this research, various advanced engineering analysis techniques for the precision diagnosis assessment of subway EMUs have been introduced and the diagnosis assessment results have been used to provide the critical information for the lifetime assessment of EMUs.