• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.135-139
• /
• 2011

In order to make high-purity ferro-manganese from $Mn_3O_4$ waste dust, the application of aluminothermite process to the reduction of the waste dust was investigated. The mixture from $Mn_3O_4$ dust as metallic source and Al metal powder as the reductant ignited, and reduced with an extremely intense exothermic reaction. The rapid propagation of the aluminothermite reaction occurred spontaneously and stably by ignition of the mixture. The Manganese having some alloy elements emerged as liquids due to the high temperatures reached up to about $2,500^{\circ}C$ and separated from the liquid by their differences of specific gravity. The result of thermite reaction showed the fact that can be obtained high purity ferro-manganese which have over about 90% of manganese content and lower impurities such as C, P, S than those of KS D3712 specification. The recovery of manganese from $Mn_3O_4$ dust was lower level of about 65% than about 75% from manganese ore by electric furnace process, that is due to spatter loss because of its extremely intense thermite reaction. But it will be improved by the process designed to provide CaO as the cooler or to use the Al metal powder having larger particle size distribution.

• 한국재료학회지
• /
• 제12권10호
• /
• pp.820-824
• /
• 2002

It is of importance to know that the bonding strength and interfacial stress of SOI wafer pairs to meet with mechanical and thermal stresses during process. We fabricated Si/2000$\AA$-SiO$_2$ ∥ 2000$\AA$-SiO$_2$/Si SOI wafer pairs with electric furnace annealing, rapid thermal annealing (RTA), and fast linear annealing (FLA), respectively, by varying the annealing temperatures at a given annealing process. Bonding strength and interfacial stress were measured by a razor blade crack opening method and a laser curvature characterization method, respectively. All the annealing process induced the tensile thermal stresses. Electrical furnace annealing achieved the maximum bonding strength at $1000^{\circ}C$-2 hr anneal, while it produced constant thermal tensile stress by $1000^{\circ}C$. RTA showed very small bonding strength due to premating failure during annealing. FLA showed enough bonding strength at $500^{\circ}C$, however large thermal tensile stress were induced. We confirmed that premated wafer pairs should have appropriate compressive interfacial stress to compensate the thermal tensile stress during a given annealing process.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.197-202
• /
• 1999

Electric arc furnaces (EAFs) use bulk electrical energy to create heat in metal refining industries. The electric arc process is a main cause of the degradation of the electric power quality such as voltage flicker due to the interaction of the high demand currents of the load with the supply system impedance. The stochastic models have described the aperiodic physical phenomena of EAFs. An alternative approach is to include deterministic chaos in the characterization of the arc currents. In this parer, a chaotic approach to such modeling is described and justified. At the same time, a DLL(Dynamic Link Library) module, which is a FORTRAN interface with TACS (Transient Analysis of Control Systems), is developed to implement the chaotic load model in the Electromagnetic Transients Program (EMTP). The details of the module and the results of tests performed on the module to verify the model and to illustrate its capabilities are presented in this paper.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.647-656
• /
• 1992

The purpose of this study was to evaluate the elastic memory process in cold worked stainless steel wire and the effect of heat treatment on it. 0.018 inch round and $0.019\times0.025$ inch rectangular wire (ORMCO stainless wire) were used in this study. Each wire type had 4 groups: non-heat treatment group, furnace heat treatment group, electric current heat treatment group, and bending after heat treatment group. Each group was consisted of 10 specimens. With the Jig, each wire was bent into v-shape uniformly, and width of two free ends of each v-shaped wire was measured by caliper (to the point of 0.1 mm correctly) at time interval of offjig, after heat treatment, 1, 2, 3, 4 hours, 1, 2, 3, 4, 5, 6 days, 1, 2, 3, 4 weeks after. The results were as follows: 1. In non-heat treatment group and bending after heat treatment group, elastic memory process was occured $60\%$ within 1 hour, and more than $90\%$ within 1 week. 2. In furnace and electric current heat treatment group, almost all elastic memory process was occured during teat treatment, and then specimen was stabilized dimensionally. 3. Magnitude of deformation by elastic memory was greater in heat treatment group than non heat treatment group and bending after heat treatment group. 4. There was no remarkable difference in deformation pattern between 0.018 inch round wire and $0.019\times0.025$ inch rectangular wire.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.37-42
• /
• 2017

이산화탄소 저감을 위한 유효한 방법 중의 하나로 칼슘규산염 광물의 간접탄산염화 공정이 보고되고 있다. 이 공정은 염산, 질산 등의 산에 의하여 칼슘규산염으로부터 칼슘성분을 침출하는 단계와 이산화탄소에 의한 침출용액의 탄산염화 단계의 두 과정으로 구성된다. 침출용매로 초산수용액을 사용하는 경우에는 침출용액을 이산화탄소로 탄산염화 하는 과정에서 초산이 재생성 되어 침출단계로 순환되어 침출용매로 재사용될 수 있다. 제철 및 제강슬래그와 같은 산업부산물은 칼슘규산염을 많이 함유하고 있어 간접탄산염화공정의 원료로 사용될 수 있다. 본 연구에서는 초산수용액에 의한 국내 전기로제강슬래그의 침출효율을 조사하기 위하여, 초산수용액 농도, 침출온도 및 침출시간 등의 침출조건 변화에 따른 침출실험을 수행하였다.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.161-165
• /
• 2004

This study has been conducted to develop a new recycling technology of sewage sludge using a carbonization process. The carbonizing yield, the calorific value and EC(electric conductivity) of carbonized sewage sludge had a tendency to be decreased with increase of the carbonizing temperature and time, but pH and the C/N were increased with increase the carbonizing temperature and time. The whole pore volume of carbonized sludge processed in the carbonizing furnace was /g, which was smaller than that in the electric furnace. But, the rates of mesopore and macropore were found to account for 100% therein. Rate of color and organic materials removal for dyeing wastewater were determined 70~97%, 78~83% on cotton yarn, 88~96%, 69~80% on wool wastewater and 77~89%, 77~87% on towel compared with powder activated carbon. Effect of carbonized sludge on chrysanthemum growth was investigated. Plant height and number of leaves was better mixture of carbonized sludge than comparison.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.490-495
• /
• 2003

In steel-making process of iron and steel industry, the purity and quality of steel can be dependent on the amount of CO contained in the molten metal. Recently, the supersonic oxygen jet is being applied to the molten metal in the electric furnace and thus reduces the CO amount through the chemical reactions between the oxygen jet and molten metal, leading to a better quality of steel. In this application, the supersonic oxygen jet is limited in the distance over which the supersonic velocity is maintained. In order to get longer supersonic jet propagation into the molten metal, a supersonic coherent jet is suggested as one of the alternatives which are applicable to the electric furnace system. It has a flame around the conventional supersonic jet and thus the entrainment effect of the surrounding gas into the supersonic jet is reduced, leading to a longer propagation of the supersonic jet. In this regard, gasdynamics mechanism about why the combustion phenomenon surrounding the supersonic jet causes the jet core length to be longer is not yet clarified. The present study investigates the major characteristics of the supersonic coherent jet, compared with the conventional supersonic jet. A computational study is carried out to solve the compressible, axisymmetric Navier-Stokes equations. The computational results of the supersonic coherent jet are compared with the conventional supersonic jets.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.132-135
• /
• 2004

We fabricated YBCO thick films by using a screen printing method with $Y_2$BaCuO$_{5}$(Y211) and BaCO$_3$ powders on Cu-substrate in $N_2$ atmosphere. Cu-sheathed YBCO thick film process is more simple and economic than YBCO coated conductor methods. The heat treatment is performed in the range of 860 - 875 $^{\circ}C$ for 5 min in the tube furnace of $N_2$ atmosphere. The flow rate of $N_2$ gas is fixed 60 $m\ell$/min. Microstructure and phases of thick films were investigated by optical microscope, X-ray diffraction(XRD) and SEM. At heat-treatment temperature, the thick films were partially melted by liquid reaction between CuO of oxidized copper substrate and the powders screen-printed on Cu-sheath. During the heat-treatment procedure, YBCO superconducting grains nucleate.e.

• 자원리싸이클링
• /
• 제16권3호
• /
• pp.27-33
• /
• 2007

구리, 주석 등의 유가금속을 다량 함유하고 있는 폐전기전자 스크랩으로부터 유가금속을 회수하는 것은 자원 재활용 측면에서 매우 중요하다. 본 연구에서는 폐동슬래그를 슬래그 형성제로 활용하여 폐전기전자 스크랩으로부터 유가금속을 추출하기 위한 새로운 공정이 제시되었다. 제안된 공정은 슬래그 형성제로 동 제련소에서 배출되는 폐동슬래그를 재활용한다는 장점이 있다. 각 실험에서는 일정한 비율로 혼합된 폐전기전자 스크랩과 폐동슬래그의 혼합시료를 보조 슬래그 형성제인 CaO와 함께 고온 용융되었다. 실험 결과 폐전기전자 스크랩에 함유된 구리와 주석이 Cu-Fe-Sn 합금상으로 각각 95% 이상, 85% 이상 추출되었다.

• 자원리싸이클링
• /
• 제32권1호
• /
• pp.50-59
• /
• 2023

전기로에서 고철(Scrap)의 용해과정에서 발생되는 분진량은 고철장입량의 약1.5%정도이며, 주로 백필터(Bag Filter)에서 포집된다. 전기로 제강분진의 주요한 구성원소인 아연(Zn)과 철(Fe)중에서 아연성분은, 제강분진에 탄소계의 환원재(코크스, 무연탄)와 석회석(C/S제어)을 첨가하여 Pellet형태로 가공한 후에 반응로(Rotary Kiln 또는 RHF)에 장입하여 환원, 휘발, 재산화의 단계적인 세부반응을 거쳐서, 60wt%Zn을 함유한 조산화아연(Crude Zinc Oxide)으로 회수된다. 한편 제강분진 중의 철(Fe)성분은, Fe-Base의 Clinker(2차부산물)라고 하는 고형물의 형태로 반응기로부터 배출된다. 기존의 Fe-Clinker의 처리방법은, 각국의 상황에 따라서 다양한 방안들이 시행되고 있는데, 대표적인 처리방법으로는 매립, 재활용(로반재, 콘크리트용 골재, 시멘트제조용 Fe-Source), 그 외에 다양한 처리방법들이 있다. 이들 방법들 중에서 매립의 경우는, 침출수에 의한 환경오염, 고가의 매립비용, Fe자원의 낭비 등의 이유로, 결코 바람직한 처리방법이라고 할 수는 없다. 그러나 Fe-Clinker중의 Fe성분을 전기로를 이용하여 직접적으로 재활용하는 방법에 대한 연구결과는 거의 찾아볼 수 없었다. 따라서 본 연구에서는 Fe-Clinker중의 Fe성분을 보다 적극적으로 회수하기 위한 방법으로서, 먼저 Fe-Clinker를 분쇄하고 이어서 비중선별과 자력선별을 순차적으로 실시하여, Fe-성분이 농축된 조분(Coarse particle, >약10㎛)과 슬래그성분을 주로 함유한 미분(Fine particle, <약10㎛)으로 분리하였다. 이렇게 분리한 조분에 탄소계 환원제(코크스, 무연탄)와 점결재(전분)를 첨가하여 단광 Clinker를 제조하여, 전기로에 고철을 장입할 때에 소량(1~3wt%)의 단광Clinker를 함께 장입하여, 단광Clinker의 첨가재(가탄재, Fe-Source, 발열재 등으로서의 역할)로서의 사용가능성을 조사하였다. 그 결과, 비록 소량이지만, 전력원단위와 생산수율이 다소 향상되는 효과를 나타내었으며, 용융금속에 대한 가탄효과도 확인할 수 있었다.