• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1115-1120
• /
• 2007

본 논문은 기둥 구조의 전극이 내부에 존재하는 노즐을 이용한 정전 분무 마이크로 추진 장치의 새로운 메커니즘을 제시하였다. 기둥 구조의 노즐로 인한 제팅의 효율 증진을 수치적 및 실험적으로 연구하였다. 노즐 상부에 존재하는 전극에 인가된 전압으로 인하여 액면에 형성된 전기장은 액체의 분무를 가능하게 하며 기둥 구조의 전극은 액면의 중앙 부분에 전기장이 집중되도록 하여 제팅을 효율적으로 할 수 있게 하였다. 또한 노즐 크기에 따른 필요한 인가전압의 차이에 대한 연구를 수행하였으며 본 연구로부터 수 마이크로미터의 노즐에 대해서 500V 이하의 전압에서 구동이 가능함을 보였다.

• 전기저널
• /
• 4호통권112호
• /
• pp.19-23
• /
• 1986

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.300-305
• /
• 2004

In this paper, new design equations based on the pole-zero analysis for multi-layered interdigital stripline linear group delay bandpass filter with tap input ports are presented. As a design example, a four-pole group delay filter with center frequency of 2.14GHz, bandwidth of 160MHz, and group delay variation of $\pm$0.1nS for LTCC technology or multilayered PCB technology is designed. In the design process, it is not necessary to simulate the entire structure, as the simulation of half structures is sufficient. Good results can be attained after the optimizing process was performed three times using the proposed equations and a commercial EM simulator.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.426-431
• /
• 2006

The case where a drain cannot flow backwards, a sewer institution can be unmanageable in this, and a mad is under water momentarily by local heavy nin by the climate phenomenon in spite of not being a lowlands belt has occurred well more than recently. By the flooded mea since it is in the state which has some human bodies at hand, when a short circuit occurs in street lighting pole which is the electric institution thing of a road, the danger of an electric shock accident becomes higher. In this paper, it was going to show improvement plan for grasping the brittle factor of street lighting pole electricity facilities through the on-site survey of street lighting pole electricity facilities, and improving this.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.309-314
• /
• 2011

Outer rotor type in-wheel switched reluctance motor for Welfare neighborhood electric vehicle is researched. In-wheel system is to drive the electric vehicle without mechanical transmission, shaft, differential gears or other mechanical system. To calculate drive power for each wheels, the elder's and disable's safety driving conditions are considered. The designed outer rotor SRM has a 6-stator and 8-rotor pole. The determined dimensions as well as the stator and rotor pole arc are simulated and tested with CAD and finite element analysis to verify the performance of the proposed motor.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권2호
• /
• pp.87-96
• /
• 2004

This paper summarizes the research results of the load management for pole transformers done in 1997-1998 and 2000-2002. The purpose of the research is to enhance the accuracy of peak load estimation in pole transformers. We concentrated our effort on the acquisition of massive actual load data for modifying the load regression coefficients, which related to the peak load estimation of lamp-use customers, and adjusting the demand-factor coefficients, which used for the peak load prediction of motor-use customers. To enhance the load regression equations, the 264 load data acquisition devices are equipped to the sample pole transformers. For the modification of demand factor coefficients, the peak load currents are measured in each customer and pole transformer for 13 KEPCO (Korea Electric Power Corporation) distribution branch offices. Case studies for 50 sample pole transformers show that the proposed coefficients could reduce estimating error of the peak load for pole transformers, compared with the conventional one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1135-1138
• /
• 2003

The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.745-752
• /
• 2012

Transverse flux machine (TFM) has been proved to be very suitable for high-torque, low-speed, and direct-drive situation in industry. But the complex structures and costly permanent magnets (PMs) are two key limitations of its wide range of applications. This paper proposes a new claw pole TFM (ACPTFM) which features an assembled claw pole stator and using the lamination steels material to overcome the complex structures. By combining response surface methodology (RSM) with design of experiment, an optimum design method is put forward to improve the PM's contribution to the torque in order to save the PM's amount. The optimum design results demonstrate the validity of the proposed optimum design method and the optimized model. Eventually, the finite-element analysis (FEA) calculation method, which is used in the optimization process, is verified by the experiments in a prototype.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2057-2061
• /
• 2015

This paper describes analysis and experimental characterization of low speed direct drive fractional slot concentrated winding (FSCW) surface permanent magnet synchronous motor (SPMSM) with consequent pole (CP) rotor, for which studies have been recently performed. The proposed motor, which consists of 30 poles and 36 slots, is analyzed and characterized by extensive 2D finite element analysis (FEA) and together with 3D FEA for an appropriate PM overhang length design. The validity of the analysis is confirmed by the corresponding experiments which fully characterize the proposed motor with excellent agreement between the FEA and the experiments. Thermal stability is also experimentally examined to determine continuous operating points and instantaneous operating points of the proposed motor. It is highly expected that the proposed motor is applicable for low speed direct drive applications.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.130-136
• /
• 2009

A lumped parameter model of Li-ion battery in hybrid electric vehicle(HEV) is constructed and system parameters are identified by using recursive least square estimation for different C-rates, SOCs and temperatures. The system characteristics of pole and zero in frequency domain are analyzed with the parameters obtained from different conditions. The parameterized model of Li-ion battery indicates highly dependant of temperatures. The system pole and internal resistance changes 6.6 and 18 times at $-20^{\circ}C$, comparing with those at $25^{\circ}C$, respectively. These results will be utilized on constructing model-based state observer or an on-line identification and an adaptation of the model parameters in battery management systems for hybrid electric vehicle applications.