• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.541-549
• /
• 2018

본 연구에서는 국내 화물 및 여객차량들을 견인하는 디젤전기 기관차의 제동에 따른 동적 거동을 분석하기 위하여 제동장치에 영향을 미치는 마찰계수, 제동압력, 주행저항 등을 시험하였다. 마찰계수는 UIC 541-4를 참고로 Dynamo 시험을 수행하였으며 시험결과는 다변량 회귀분석을 통해 제동하중, 제동초기 속도와의 관계를 분석하여 제시하였다. 제동압력은 상용제동과 비상제동으로 구분하였으며, 제동밸브와 배관의 특성을 반영하기 위하여 시간에 따른 제동압력 변화를 대상 차량에서 측정하였다. 차량에 작용하는 외력을 반영하기 위하여 EN 14067-4의 타행시험을 수행하고 2차 다항식 형태의 주행저항을 제시하였다. 도출한 주행저항을 동일 차종에 대하여 각 국가별로 사용하고 있는 주행저항들과 비교하였다. 차량의 재원, 마찰계수, 제동압력, 주행저항을 바탕으로 직선 평탄 선로를 주행하는 디젤전기기관차의 동적 거동을 EN 14531-1에서 제시된 시간적분을 이용하여 해석하였다. 해석 결과는 상용제동과 비상제동에 대하여 각각 차량의 속도이력 시험결과와 비교 검증하였으며 상당히 합리적인 결과를 도출하였다. 본 연구의 결과들은 철도차량들을 연결하여 운행하는 열차의 동적 거동해석에 활용할 수 있을 뿐 아니라 차량 설계에서 제동에 영향을 미치는 다양한 파라미터들을 분석하고 성능향상의 기초자료로 활용할 수 있을 것으로 기대된다.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.211-215
• /
• 2017

The APF (All Pass Filter) method that utilizes the computational power of the controller is most commonly used. However, since the calculation of the filter coefficient is complicated, the calculation is carried out in advance. It is difficult to apply it to the frequency fluctuation environment because the coefficient value is fixed. In this paper, a new control method of single phase PLL that can be usefully used in PWM converter device for electric railway was explained. Comparison and examination of similarities and differences between the conventional APF method PLL controller method and the newly proposed modified MA filter method PLL technique were performed. The possibility of implementation of the modified MA filter method through computer simulation was analyzed. In conclusion, the method proposed as the conclusion was applied to the APU(Auxiliary Power System) of 8200 Series Electric Locomotive and its usefulness was confirmed.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.84-94
• /
• 2018

In recent years, the diminishing of operation and maintenance cost using advanced maintenance technology is attracting many companies' attention. Especially, the heavy machinery industry regards it as a crucial problem since a failure of heavy machinery requires high cost and long downtime. To improve the current maintenance process, the heavy machinery industry tries to develop a methodology to predict failure in advance and to find its causes using usage data. A better analysis of failure causes requires more data so that various kinds of sensor are attached to machines and abundant amount of product usage data is collected through the sensor network. However, the systemic analysis of the collected product usage data is still in its infant stage. Many previous works have focused on failure occurrence as statistical data for reliability analysis. There have been less works to apply product usage data into root cause analysis of product failure. The product usage data collected while failures occur should be considered failure cause analysis. To do this, this study proposes a methodology to apply product usage data into failure cause analysis. The proposed methodology in this study is composed of several steps to transform product usage into failure causes. Various statistical analysis combined with product usage data such as multinomial logistic regression, T-test, and so on are used for the root cause analysis. The proposed methodology is applied to field data coming from operated locomotive and the analysis result shows its effectiveness.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3672-3679
• /
• 2015

열차 운행에 따른 전장품들의 발열을 예측하기 위해 동력차 내 벽면온도 및 외부 유출 온도 및 풍속, 외부로부터 유입되는 유입 공기의 유입 온도 및 속도를 측정하였다. 이를 위하여 적외선카메라를 이용하여 고속열차 내부의 전장품 및 벽 표면의 온도를 측정하였다. 또한 전장품에서 발생하는 열은 고속열차 천장에 설치된 덕트를 통하여 외부로 배출된다. 배출되는 공기의 온도 및 속도를 측정하였고, 외부에서 동력차 내부로 들어오는 유입공기의 온도 및 속도도 측정하였다. 또한 부착형 온도센서를 이용하여 동력차 내부의 벽 및 전장품 표면에서의 온도를 측정하였다. 측정된 결과를 이용하여 열차 주행에 따른 전장품의 발열 특성을 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.158-166
• /
• 2007

한국철도공사는 고속철도의 운행을 계기로 선진철도 정비방법의 습득과 더불어 기존차량에 대한 검수주기 및 방법에 대한 과학적이고 체계적인 시행을 위해 철도차량 RCM적용에 관한 연구를 시행 중이다. 그 동안 철도차량의 부품과 시스템에 대한 기술의 발전이 급속히 이루어지고 있는 것에 비해 정비방법의 발전은 상대적으로 느렸다고 할 수 있다. 이에 한국철도공사에서는 부품과 시스템의 기술발전에 앞서는 정비방법의 적용은 물론이고 차량의 기술적 발전을 리드할 수 있는 정비체계를 구축하고자 노력하고 있다. 고속차량인 KTX를 제외한 기존차량은 전동차, 전기기관차, 디젤기관차, 디젤동차, 객차, 화차 등으로 구분하여 운행되고 있다. 그 중 객차, 화차를 포함한 기존차종에 현행 시행되고 있는 검수 주기 및 방법을 분석하여 개선방향을 찾아 최적의 차량정비 주기 및 방법을 적용하고자 한다.

• Earthquakes and Structures
• /
• 제11권5호
• /
• pp.841-859
• /
• 2016

Bridge bearings are important connection elements between bridge superstructures and substructures, whose health states directly affect the performance of the bridges. This paper systematacially presents a new method to identify the bridge bearing damage based on the neural network theory. Firstly, based on the analysis of different damage types, a description of the bearing damage is introduced, and a uniform description for all the damage types is given. Then, the feasibility and sensitivity of identifying the bearing damage with bridge vibration modes are investigated. After that, a Radial Basis Function Neural Network (RBFNN) is built, whose input and output are the beam modal information and the damage information, respectively. Finally, trained by plenty of data samples formed by the numerical method, the network is employed to identify the bearing damage. Results show that the bridge bearing damage can be clearly reflected by the modal information of the bridge beam, which validates the effectiveness of the proposed method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1642-1649
• /
• 2010

At present, KORAIL is in the middle of renovating. All steps exert great effort at cost reduction and a profit improvement. Especially to improve maintenance method and inspection period at the rolling-stock division lots of research is under progress. Daily inspection of rolling stocks is to operate the rolling stock normally. Daily inspection items are driving control device, coupling device, brake system, water system and air conditioning system, electrical system etc. Half of the maintenance manpower are inputted at daily inspection. Strengthens the quality and optimize the proportion of daily inspection are urgent problem. Daily inspection period extension aim is as follows. KTX from 3,500km to 5,000km, passenger car from 1st to 3,500km, new style electric locomotive from 2nd to 5,000km, the diesel locomotive is 2,800km from 1,200km. In this paper, the optimal daily inspection period and methods are considered including expected problem and counter measures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.219-222
• /
• 2007

The Full-Off Fitting of Movable Bracket using conventional line have received a dynamic contact impact between contact wire and pantograph of electric rolling stock, so this impact cause a rapid vibration of foreword and back near the supporting point of movable bracket. The Full-Off Fitting on Movable Bracket in conventional line differs from that in high speed line. Now conventional line have required a speed up for new electric locomotive and electric car. In speed-up track and big impact place, the Full-Off Fitting and the dropper often get demage. We have done a study of buffering function to solve that problem in conventional line. We have find a need adopting buffer fitting. It is decrease a dynamic impact between contact wire and pantograph of electric rolling stock.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1384-1389
• /
• 2004

The primary objective of this paper is to examine the capacity of electrical transmission in electric railway feeding system. Although supply capacity of railway substation are sufficient and there is no accident, due to the electrical transmission limit of feeding line the voltage breakdown may occur when large capacity of electric load at feeding line exist. So, using multi-port analysis model, we draw P-V curve due to the length of feeding line, load, location and power factor of electric locomotive. And through case study, compare measurement result and simulation result

• 한국철도학회논문집
• /
• 제3권4호
• /
• pp.219-228
• /
• 2000

This paper presents an advanced approach to simulate AC electric railway system in steady-state. The algorithm consists of two parts. One is circuit modeling of elements of electric railway system, the other is an analysis on electric circuit. The modeling procedure has two steps, in the first step, proposed is the modeling method which is considered to be an internal impedance of the autotransformers and mutual impedances between the feeding systems. For the load(locomotives) modeling which is the second step, improved results are obtained as application to the proposed constant power model compared with constant impedance model. In the analysis on electric circuit, a generalized analysis method using the loop equation has been proposed and there is no limit in the number of trains between the ATs. In addition, the computer simulation by the proposed model was practiced. Simulation result seems very reasonable. It is therefore concluded that techniques for the electric circuit modeling and analysis have been established. Accuracy of the techniques will be further investigated.