• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2008

Purpose: This study is to decide a quality control and calibration period of LCD display devices used for reading diagnostic images. Materias and Methods: The assessment test of 20 flat panel LCD color display devices used for reading diagnostic images were performed based on AAPM TG 18 protocol over the total six sessions at one month intervals from three months after primary calibration, in terms of geometric distortion, reflection test, luminance response evaluation, luminance uniformity, resolution, noise, veiling glare and chromaticity test. Results: The results of geometric distortion, reflection test, luminance uniformity, resolution, noise, veiling glare and chromaticity test were within the criteria recommended by AAPM TG 18, except for luminance response evaluation. In the measured luminance deviation of luminance response evaluation, 4(25%) of 20 display devices were passed a criterion from four months after calibration, and 11 (55%) were passed from eight months. Also in the contrast response of the luminance response evaluation, 1(5%) display device was passed a criterion from four months after calibration, and 3(15%) were passed from eight months. Conclusion: Considering the passing deviation after calibration, the time required and a manpower, the quality control and calibration period of LCD display devices used for reading diagnostic images should be a three months and six months after calibration.

• Korean journal of applied entomology
• /
• v.16 no.2 s.31
• /
• pp.127-131
• /
• 1977

This experiment was conducted to evaluate the insect-proof netting, chemical sprays, application of attractants, fruit bagging and light trapping as the control methods of the fruit piercing moths in the orchards on reclaimed land in Sugyeri, Goksung, Chonnam Province, during June to October in 1976. The results are summarized as follows; 1. Insect-proof. netting effectively decreased fruit damage, compared as to the control, down to $9.4\%$ from $38.3\%$ in plum, $2.5\%$ from $53.0\%$ in peaches and $10.0\%$ from $29.0\%$ in grapes. 2. The control effects of chemicals varied significantly among the 7 insecticides tested: Deoclean, Naphthalene, and Thiometon were more effective to the fruit damages as low as $2.0\%,\; 3.6\%,\;and\;5.9\%$ respectively. while the fruit damage was rather high, $9.8\%$ for Demeton, $10.1\%$, for Takju +lead arsenate and $14.2\%$ for Padan. ,3. In the test with 7 attractants, the largest number of moths attracted and killed was 416.by Takju+brown sugar and the next was 307 by Takju+venegor while this number was 141 by mixed solution (see text) which is rather lower than expectation The fruit damage was lowest in Takju+honey and$5.2\%$, the next was $5.60\%$ for Takju+venegor and the highest was $12.0\%$, Takju alone. 4. Fruit bagging with polyethylene film effectively decreased the fruit damage from the inserts but brought about severe fruit rot and delay ripening. Meanwhile, paper bagging was less effective in preventing insects, resulting in $17.5\%$ fruit damage, however, gave no adverse effect other than slight Belay in ripening. 5. Light trapping was hardly expected to be a method of controlling these fruit piercing moths. However, the number of collected moths swarmed by electric light was 10.8 for can-descence, 0.95 for blue, and 0.22 for yellow light.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.102-109
• /
• 2014

This study was carried out to investigate the effects of diffused light materials on marketable yield and quality of sunlight dried red pepper in plastic film house. The after ripening methods were composed of 3 treatments; using electric bulk dryer (Bulk), sealing house (House), and PE sealing. The diffused light materials were control, tent, shading 35% (Shading net), white polypropylene (PP (white)), and black polypropylene (PP (Black)). The marketable yield was high in order of Bulk as 300 g, House as 275 g, and PE sealing as 112 g. The redness of PE sealing was the highest as 17.85 and that of Bulk was the lowest as 10.65. There was significant difference in redness among the treatments. The moisture content of red pepper was the most rapidly reduced in control, and was the most slowly reduced in Shading net treatment. The marketable yield index was the higher in PP (white) as 114% than control. The redness had a significant difference in PP (Black) and tent compared to the other treatments. The capsaicin content showed the highest as $160mg{\cdot}100g^{-1}$ in PP (white) treatment. Conclusively, the most effective method for sunlight drying red pepper was House with PP (White) treatment. It delayed drying for 2 days but increased marketable yield at 114% than control when sunlight dried red pepper in plastic house. Our results also provided an optimized method for improvement of drying red pepper with sunlight, and will be useful for further drying red pepper research.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.448-454
• /
• 2021

This study was conducted to the effect of low air temperature and light intensity conditions on yield and quality of tomato at the early stage of growth in Korea. Inplastic greenhouses, low temperature and low temperature with shade treatments were performed from 17 to 42 days after plant. Tomato growing degree days were decreased 5.5% due to cold treatment during the treatment period. Light intensity decreased 74.7% of growing degree days due to shade. After commencing treatments, the plant growth decreased by low temperature and low radiation except for height. Analysis of the yield showed that the first harvest date was the same, but the yield of the control was 3.3 times higher than low temperature with shade treatment. The cumulative yields at 87 days after transplanting were 1734, 1131, and 854 g per plant for control, low temperature, and low temperature with shade, respectively. The sugar and acidity of tomatoes did not differ between treatment and harvesting season. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of the photosynthetic rate. The results showed that the maximum photosynthetic rate, J (electric transportation rate), TPU (triose phosphate utilization), and R_d (dark respiration rate) did not show any difference with temperature, but were reduced by shading. Vcmax (maximum carboxylation rate) was decreased depending on the low temperature and the shade. Results indicated that low temperature and light intensity at the early growth stage can be inhibited the growth in the early stage but this phenomenon might be recovered afterward. The yield was reduced by low temperature and low intensity and there was no difference in quality.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.468-475
• /
• 2022

This study was conducted to find out the efficiency of heating initiative temperature and carbon dioxide fertilization in summer squash (Cucurbita moschata D.). The heating start temperature experiment was performed at 9℃, 12℃, and 15℃ using an electric heater and operated when the temperature was lower than the target temperature. The CO₂ fertilization concentration experiment was performed from 7 to 12 with the control, 500 µmol·mol^-1, and 800 µmol·mol^-1 using liquefied carbon dioxide. Investigation items were plant height, stem diameter, number of leaves, leaf area, fresh weight, dry weight, also economic analysis was conducted by surveying only fruits exceeding 100 g. Photosynthesis was measured for the upper leaf position to calculate the saturation point according to the control. The photo saturation point was 587 µmol·m^-2·s^-1, and the CO₂ saturation point was 702 µmol·mol^-1. A_max values by carbon dioxide were 13.4, 17.8, 17.2, 19.6, and 17.5 µmolCO₂·m^-2·s^-1 in the order of 9℃, 12℃, 15℃, 500 µmol·mol^-1, and 800 µmol·mol^-1. In the temperature experiment, 9℃ in growth did not grow normally and no fruiting was performed. 12℃ and 15℃ were higher than 9℃, but there was no significant difference in growth and production. The CO₂ fertilization experiment showed no significant difference between the treatment in growth, but the productivity of 800 µmol·mol^-1 was the best. Comprehensively, the heating initiative temperature of 15℃ was good for crop growth and production, but there is no significant difference from 12℃, so it is good to set the heating start temperature to 12℃ economically, and maintaining of 800 µmol·mol^-1 is effective in increasing production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.3
• /
• pp.141-151
• /
• 1979

To investigate the relationship between the effect of potassium basal and top dressing amount on rice plant under the limed condition, a pot experiment was conducted with Milyang 21, rice variety. Growing status, yield components and chemical component of rice, plant were determined and soils were analyzed along with the growing stages and obtained results are as follows. 1. Control treatment, without lime application shows a good vegetative growth as compared with lime treated one. However grain yield was higher in lime treated pot when potassium was applied as basal and top dressing. 2. There was no big difference between potassium applied and control treatment on growing status of nice plant until 20 days after transplanting. However in case of lime treated pot big difference were observed 20 days after transplanting resulting lower grain yield as compared with control treatment. This trend were severe in a lime treated treatment. 3. In control treatment, potassium basal dressing shows higher grain yield as increase the amount of basal dressing and the highest yield obtained in all basal potassium application treatment. However in case of lime treated pot when two-third of potassium were applied as basal dressing, potassium content of rice became lower at reproductive stage and resulted lower yield. When we applied all the potassium as a basal dressing, there were no differences as compared with control treatment in terms of grain yield. 4. The soil condition that affects potassium absorption disorder in rice plant such as unlimed condition, potassium application should be done as a basal dressing. However in limed condition that potassium absorption disorder occurs scarcely, and potassium content exists unsufficient amount in soil, large amount of potassium as basal dressing and the rest as top dressing are recommended. 5. The higher content of potassium in rice plant at the reproductive growing stage results heavier tillers as compared with lower one so that heavier tillers produce more grain yield. 6. At vigorous growing stage there was a positive correlation between electric conductivity of soil and amount of potasium absorbed by rice plant. This fact suggests that to obtain higher yield large amount of potassium top dressing at late of vegetative growing stage are necessary so that the content of potassium in rice plant will increase and results higher yield.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2329-2337
• /
• 2013

This study was done objected to the chronic stroke patients in order to evaluate change in brain wave activity and cognitive performance when Neurofeedback training. The subjects were over 6 months ago in chronic stroke patients screened-test through the 20 patients, 10 persons in each group were randomly placed. This was carried out in 4 weeks in total, with control group(n=10) on general physical therapy and experimental group(n=10) on general physical therapy along with Neurofeedback training. The general physical therapy was applied 5 times a week, 30 minutes at once, Neurofeedback training was applied as equally as the general physical therapy, which makes 20 times in total. To learn about the effect before the training, after training, and 2 weeks after the training in electric physiological measurement method of the brain, electroencephalogram(EEG) to examine challenges by calculating the absolute spectrum power for standard EEG change(%), followed by evaluation with clinical assessment tool MMSE-K, Stroop Test, Digit Span Test. As a result of comparing the change in brain wave through EEG, after training and 2 weeks after training showed that absolute ${\alpha}$-power and absolute ${\beta}$-SMR power of experimental group have increased and absolute ${\theta}$-power decreased significantly compared to experimental group I. Moreover, the MMSE-K score in trial appraisal has increased significantly, and the error in Stroop Test and Digit Span Test has decreased significantly. such results, with the chronic stroke patient's brain wave control, Neurofeedback training was determined to improve the cognitive performance. this study suggests a new training possibility of stroke patients by identifying the training effects of Neurofeedback training that trains the brain directly with brain wave control.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.311-317
• /
• 2009

This study was performed using animals to confirm the effect of tourmaline-ionized water (TIW) the properties of which were changed by tourmaline energy and electric discharge. In the ICR mice fed high-fat diet, body weight increasing rate of the TIW-treated group (Exp) was generally decreased and moreover exhibited significance at 11th week (P<0.05) compared with the control (Con) group fed distilled water, although water intake of the Exp group was lower than that of the Con group. In the ICR mice with $CCl_4$-induced hepatotoxicity, AST and ALT activities of the Exp group were not significant but showed some decreasing trend, and histological damage of liver was less compared with thatof the Con group. On the study of ethanol-induced hangovers in Sprague-Dawley rat, blood alcohol concentration was significantly decreased (P<0.01), activity of GST, antioxidant enzyme related to the alcohol metabolism, was increased in liver tissue (P<0.05), and AST and ALT show a tendency to be decreasedin the Exp group. These results suggest that drinking TIWhas not only some obesity preventing effect but also an alcohol detoxification effect and liver protecting effect in vivo. It is supposed due to a structural change of water cluster and a property which maintains the changed structure through tourmaline energy and electric discharge. Therefore, TIW has a potentiality to be developed as functional water with several beneficial effects as well as for daily drinking, but further study on the mechanism related with efficacy will be necessary.