• 무역학회지
• /
• 제45권1호
• /
• pp.137-153
• /
• 2020

On February 14, 2019, the government of Korea formally decided to consider the feasibility of joining the Comprehensive and Progressive Trans-Pacific Partnership (CPTPP) and has since been conducting bilateral consultations with individual member countries. In terms of the impact estimation, the CPTPP is actually a Korea-Japan FTA, and the most sensitive issue in the FTA is the opening of the auto industry market to Japan. Despite these circumstances, previous studies have predicted that the auto industry will be a beneficiary industry when joining the CPTPP. However, the Korean auto industry is opposed to joining the CPTPP. In order to investigate the cause of this discrepancy, this paper examines the problems of previous studies in estimating the impact of joining the CPTPP and found that the preceding study did not consider the industrial characteristics of the auto sector, especially in the context of Japan-Korea trade, and was heavily dependent on the Armington elasticity (structure) in the demand function of the GTAP CGE model. As a result, the domestic auto sector could lower prices and increase exports when joining the CPTPP. This paper attempts to precisely re-estimate the impact of joining the CPTPP on the auto sector in a way that corrects these problems by changing the CGE model and reflecting the major characteristics of the industry, with policy implications for the negotiation of CPTPP accession.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.39-52
• /
• 2024

If the governing differential equation arising from engineering problems is treated as an analytic, continuous and derivable function, it can be expanded by one point as a series of finite numbers. For the function to be zero for each value of its domain, the coefficients of each term of the same power must be zero. This results in a recursive relationship which, after applying the natural conditions or the boundary conditions, makes it possible to obtain the values of the derivatives of the function with acceptable accuracy. The elastoplastic analysis of an inhomogeneous thick sphere of metallic materials with linear variation of the modulus of elasticity, yield stress and Poisson's ratio as a function of radius subjected to internal pressure is presented. The Beltrami-Michell equation is established by combining equilibrium, compatibility and constitutive equations. Assuming axisymmetric conditions, the spherical coordinate parameters can be used as principal stress axes. Since there is no analytical solution, the natural boundary conditions are applied and the governing equations are solved using a proposed new method. The maximum effective stress of the von Mises yield criterion occurs at the inner surface; therefore, the negative sign of the linear yield stress gradation parameter should be considered to calculate the optimal yield pressure. The numerical examples are performed and the plots of the numerical results are presented. The validation of the numerical results is observed by modeling the elastoplastic heterogeneous thick sphere as a pressurized multilayer composite reservoir in Abaqus software. The subroutine USDFLD was additionally written to model the continuous gradation of the material.

• 한국의상디자인학회지
• /
• 제24권4호
• /
• pp.41-56
• /
• 2022

This study aims to investigate the actual condition of wearing leggings and the preferred design of down-aging women in their 30s and 40s who have young sensibility, but are starting to enter a middle-aged body type. By analyzing the problems experienced when wearing leggings in this age group, this study intends to provide basic data for the development of a middle-aged female leggings pattern with an improved fit. Therefore, a survey was conducted on 214 women in their 30s and 40s. The results of the survey are as follows. Among down-aging women who want to look younger, leggings are becoming an essential item, but most leggings brands are producing leggings with patterns suitable for women in their 20s. The results of this study also showed that down-aging women in their 30s and 40s mainly purchase and prefer body-fitting leggings. However, they are experiencing discomfort due to 'Y-zone accentuate', 'undergarment accentuate', 'cloth stucking', and 'waist band curling and tightening'. The results indicate that women in their 30s and 40s, who are starting to change to a middle-aged body type, have fit problems. Women in their 20s generally prefer functions that improve the body line, while those in their 30s and 40s prefer functions that improve movement and cover problems caused by the abdomen and the Y-zone area. Therefore, when designing leggings for down-aging women in their 30s and 40s, based on body-fitting leggings, a material with excellent elasticity must be selected. Also develop patterns that solves 'Y-zone accentuate', 'undergarment accentuate', 'cloth stucking', and 'waist band curling and tightening' problems.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.49-56
• /
• 2012

If cement can be manufactured with industrial byproducts such as granulated blast furnace slag, phosphogypsum, and waste lime instead of clinker, there would be many advantages, including maximum use of these industrial byproducts for high value-added resources, conservation of natural resources and energy by omitting the use of clinker, minimized environmental pollution problems caused by CO2 discharge, and reduction of the production cost. By this reason, in this study, mechanical behavior tests of non-burnt cement concrete were performed, and elasticity modulus and stress-strain relationship of non-burnt cement concrete were proposed. 6 test members were manufactured and tested according to reinforcement ratio and concrete compressive strength. By the test results, there was no difference between ordinary concrete and non-burnt cement concrete of flexural behavior. In order to verify the proposed non-burnt cement concrete model, nonlinear analytical model was derived by using strain compatibility method. By the results of comparison between test results, ordinary concrete model and proposed model, The proposed model well predicted the flexural behavior of non-burnt cement concrete.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.115-121
• /
• 2012

클링커 대신 고로슬래그, 폐인산석고, 폐석회 등의 산업 부산물을 이용하여 비소성시멘트를 제조하면 산업부산물 재활용, 클링커 제조를 위한 에너지 감소, $CO_2$저감으로 인한 환경오염문제 및 생산원가 저감 등의 장점이 있다. 이러한 이유로 본 연구에서는 비소성 시멘트 콘크리트의 역학적 거동실험을 수행하여 비소성 시멘트 콘크리트의 탄성계수, 응력-변형률 관계를 제안하였다. 또한 철근비, 압축강도를 변수로 9개의 구조 시험체를 제작하였으며, 그 실험 결과 비소성 시멘트 콘크리트의 휨 및 전단 거동 경향은 일반 콘크리트 부재와 크게 차이나지 않는 것으로 나타났다.

• 전산구조공학
• /
• 제4권2호
• /
• pp.87-94
• /
• 1991

본고에서는 Sandhu등에 의해 개발된 다변수경계치문제의 변분모델화 방법을 이용하여 범함수의 독립변수로써 변위와 응력을 동시에 포함하는 이방성탄성문제의 혼합형변분원리(Mixed Variational Principle)를 유도한다. 탄성방정식을 내적공간에서 self-adjoint한 미분연산자매트릭스 방정식으로 표시한 후 다변수 경계치문제의 변분이론을 적용하므로써 일반적 범함수가 구해지며, 이때에 지배방정식의 미분연산자와 경계조건식의 연산자의 일관성 (Consistency)을 유지하므로써 경계조건도 체계적으로 범함수내에 포함시킬 수 있다. 이 일반적 범함수에서 미분연산자의 self-adjointness성질을 이용하여 응력함수의 도함수를 제거하고 탄성방정식중 특정식이 항상, 정확히 만족된다고 가정하므로써 원하는 혼합형변분원리의 범함수를 유도할 수 있다. 여기에서 유도된 변분원리는 최근 Reissner에 의해 개발된 변분원리와 유사한 물리적 의미를 가지나 유도방법이 다를 뿐 아니라 일반적 이방성탄성체에 적용할 때 보다 편리한 형태로 된다. 이 혼합형변분원리는 다양하게 응용될 수 있으나, 복합재료적층판과 같은 이질성, 이방성 평판이론, 또는 쉘이론의 유도에 유용하게 사용할 수 있다.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.163-179
• /
• 2017

The axisymmetric buckling delamination of the Piezoelectric/Metal/Piezoelectric (PZT/Metal/PZT) sandwich circular plate with interface penny-shaped cracks is investigated. The case is considered where open-circuit conditions with respect to the electrical displacement on the upper and lower surfaces, and short-circuit conditions with respect to the electrical potential on the lateral surface of the face layers are satisfied. It is assumed that the edge surfaces of the cracks have an infinitesimal rotationally symmetric initial imperfection and the development of this imperfection with rotationally symmetric compressive forces acting on the lateral surface of the plate is studied by employing the exact geometrically non-linear field equations and relations of electro-elasticity for piezoelectric materials. The sought values are presented in the power series form with respect to the small parameter which characterizes the degree of the initial imperfection. The zeroth and first approximations are used for investigation of stability loss and buckling delamination problems. It is established that the equations and relations related to the first approximation coincide with the corresponding ones of the three-dimensional linearized theory of stability of electro-elasticity for piezoelectric materials. The quantities related to the zeroth approximation are determined analytically, however the quantities related to the first approximation are determined numerically by employing Finite Element Method (FEM). Numerical results on the critical radial stresses acting in the layers of the plate are presented and discussed. In particular, it is established that the piezoelectricity of the face layer material causes an increase (a decrease) in the values of the critical compressive stress acting in the face (core) layer.

• 자원ㆍ환경경제연구
• /
• 제14권2호
• /
• pp.475-491
• /
• 2005

공업용수 수요량 예측방법으로 현재 사용되고 있는 부지면적원단위법의 문제점을 분석하고 이에 대한 대안으로 수요함수를 이용하는 방법을 분석한다. 실제 조사 자료인 산업 총조사보고서의 자료와 비교하면 최근의 공업용수 수요량은 부지면적 원단법의 수요량 예측치보다는 본 연구에서 사용한 수요함수를 이용하여 추정한 수요량 예측치가 훨씬 더 정확하게 추정되었음을 보여준다. 그리고 가격 변화에 따른 수요량 변화 효과가 상당함을 보이고 있으므로 공업용수 수요량 관리를 위한 가격정책의 유효성을 보여준다. 따라서 향후 공업용수 수요량 추정에서는 부지면적원단위법보다는 용수 가격 및 산출량 등 경제적인 변수를 고려한 수요함수를 이용하는 것이 바람직하다.

• Archives of Plastic Surgery
• /
• 제41권4호
• /
• pp.337-343
• /
• 2014

Background The reconstruction of large skin and soft tissue defects on the lower extremities is challenging. The skin graft is a simple and frequently used method for covering a skin defect. However, poor skin quality and architecture are well-known problems that lead to scar contracture. The collagen-elastin matrix, Matriderm, has been used to improve the quality of skin grafts; however, no statistical and objective review of the results has been reported. Methods Thirty-four patients (23 male and 11 female) who previously received a skin graft and simultaneous application of Matriderm between January 2010 and June 2012 were included in this study. The quality of the skin graft was evaluated using Cutometer, occasionally accompanied by pathologic findings. Results All 34 patients showed good skin quality compared to a traditional skin graft and were satisfied with their results. The statistical data for the measurement of the mechanical properties of the skin were similar to those for normal skin. In addition, there was no change in the engraftment rate. Conclusions The biggest problem of a traditional skin graft is scar contracture. However, the dermal matrix presents an improvement in skin quality with elastin and collagen. Therefore, a skin graft along with a simultaneous application of Matriderm is safe and effective and leads to a significantly better outcome from the perspective of skin elasticity.

• 한국전자거래학회지
• /
• 제17권2호
• /
• pp.105-114
• /
• 2012

최근 지구 온난화와 에너지 고갈 및 환경파괴로 인한 환경 문제에 대하여 세계 각국에서 심각하게 고민하고 있으며, 전기자동차의 상용화를 앞두고 이산화탄소 배출의 저감 및 효율적인 에너지 사용이 중요시 되고 있다. 또한, IT 기술의 발달과 함께 독점적인 전력공급에서 수요자가 참여하는 양방향 커뮤니케이션의 스마트 그리드의 개념이 도입되었다. 주요 국가들에서는 스마트 미터의 보급과 함께 에너지 사용의 효율성 개선을 위하여, 전력 경쟁시장에서 소비자의 수요반응의 활성화를 위한 인센티브의 지급 등의 정책도입이 요구되고 있다. 이에, 본 연구에서는 머지않아 등장할 소매전력시장에서 소비자의 수요반응을 증진하여 소비자의 전기 사용 비용을 절감하며 소매사업자의 이익을 최대화하는 전력 가격결정 모델을 제시하였다. 소비자 수요반응 참여율과 가격 탄성률에 따른 시뮬레이션을 시행하여 수요 반응을 나타내는 소비자 별 탄성률을 모든 소비자가 시간대별 고정 값을 사용하는 것과 소비자 별 탄성률을 예측하는 것을 비교하였다. 이를 통하여 전력 소매 시장에서 소비자의 에너지 사용을 줄이고 소매업자의 이익을 최대화할 수 있음을 밝혔다.