• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.637-650
• /
• 2021

The paper presents an investigation of the widely varying mechanical performance and behaviour of steel and Glass Fibre Reinforced Polymer (GFRP) reinforced concrete beams using non-destructive techniques of Acoustic Emission (AE) and Digital Image Correlation (DIC) under four-point bending. Laboratory experiments are performed on both differently reinforced concrete beams with 0.33%, 0.52% and 1.11% of tension reinforcement against balanced section. The results show that the ultimate load-carrying capacity increases with an increase in tensile reinforcement in both cases. In addition to that, AE waveform parameters of amplitude and number of AE hits successfully correlates and picks up the divergent mechanism of cracking initiation and progression of failure in steel reinforced and GFRP reinforced concrete beams. AE activity is about 20-30% more in GFRP-RC beams as compared to steel-RC beams. It was primarily due to the lower modulus of elasticity of GFRP bars leading to much larger ductility and deflections as compared to steel-RC beams. Furthermore, AE XY event plots and longitudinal strain profiles using DIC gives an online and real-time visual display of progressive AE activity and strains respectively to efficaciously depict the crack evolution and their advancement in steel-RC and GFRP-RC beams which show a close matching with the micro-and macro-cracks visually observed in the actual beams at various stages of loading.

• Advances in aircraft and spacecraft science
• /
• 제9권4호
• /
• pp.301-318
• /
• 2022

This paper presents the free vibration analysis of 3D printed sandwich beams by using high-order theories based on the Carrera Unified Formulation (CUF). In particular, the component-wise (CW) approach is adopted to achieve a high fidelity model of the printed part. The present model has been used to build an accurate database for collecting first natural frequency of the beams, then predicting Young's modulus based on an inverse problem formulation. The database is built from a set of randomly generated material properties of various values of modulus of elasticity. The inverse problem then allows finding the elastic modulus of the input parameters starting from the information on the required set of the output achieved experimentally. The natural frequencies evaluated during the experimental test acquired using a Digital Image Correlation method have been compared with the results obtained by the means of CUF-CW model. The results obtained from the free-vibration analysis of the FDM beams, performed by higher-order one-dimensional models contained in CUF, are compared with ABAQUS results both first five natural frequency and degree of freedoms. The results have shown that the proposed 1D approach can provide 3D accuracy, in terms of free vibration analysis of FDM printed sandwich beams with a significant reduction in the computational costs.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.76-92
• /
• 2008

The purpose of this study was to analyze the general wearing attitude & brand Image Perception for Golf Wear in wearer's mind, and to investigate the brand preference on the image characteristics of golf wear, and to find out the wearer's purchasing point for golf wear, for developing the possibility and strategy of the golf wear market for the apparel marketers and manufacturers. For this study, the data obtained from 210 respondents were analyzed by the descriptive statistics, Pearson's simple correlation, Crossing Analysis, parato graph. The results from the study were as follow : The respondents who were specially wearing for golf game were 23.3%(49 persons) among the 210 respondents. The 210 respondents evaluated highly the features of golf wear, such as design(51%), quality(44.3%), materials(36.2%), color(35.2%), size(21.0%), as the purchasing point for golf shirts, otherwise, the 210 respondents evaluated lowly the social aspects of golf wear, such as, fashion conformity, brand loyalty and promotion. And the most important material features for the golf wear was the elasticity, speed dryness by the 210 respondents The most frequent brand by 207 respondents described in the free style was Daks(11.1%) and Ping(11.1%). The 205 respondents described in the free style evaluated Daks(14.6%) as the most preference brand. The reason for the most preference brand was based with the comfort and pleasure of design, quality, color, size, materials.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.49-58
• /
• 1998

The SPM could image the most detailed microstructure of a sample in a wet and dry state by measuring the interaction between the atoms on the sample surface and the extremely sharp probe tip. The refined fibre exhibited large wrinkles formed by fibrillar bundles, the disintegrated fibres extensively showed “scale-like features”. By using the Non-Contact Atomic Force Microscopy (NC-AFM) and Contact Atomic Force Microscopy (C-AFM) including Phase Detection Microscopy (PDM) and Force Modulation Microscopy (FMM), it was possible to investigate surface topography, surface roughness and mechanical property (hardness or visco-elasticity) of fibre surface in detail. The PDM and FMM images showed that the disintegrated only fibre displayed uniform mechanical properties, whereas the refined one did not. The surface roughness of pulp fibres was higher in refined fibres than in disintegrated fibres due to the presence of external fibrils. These SPM images would be used to provide visual evidence of morphological change of a single fibre created during mechanical treatments such as refining, drying, calendering and so on.

• Clinical Endoscopy
• /
• 제57권2호
• /
• pp.164-174
• /
• 2024

Pancreatic cancers have a poor prognosis, and their incident rates have risen. Endoscopic ultrasonography (EUS) is an efficient and reliable diagnostic modality for pancreatic lesions, providing high spatial resolution. However, while EUS helps to detect minor pancreatic lesions, nearly all solid pancreatic lesions are hypoechoic, which creates difficulty in making differential diagnoses of pancreatic lesions. When diagnosing pancreatic lesions, the performance of image-enhanced EUS techniques is essential, such as EUS elastography or contrast-enhanced harmonic EUS (CH-EUS). CH-EUS diagnosis is based on assessing the vascularity of lesions, whereas tissue elasticity is measured via EUS elastography. Elastography is either strain or shear-wave, depending on the different mechanical properties being evaluated. The usefulness of enhanced EUS techniques is demonstrated in this review for the differential diagnosis of pancreatic lesions, including solid and cystic lesions, and pancreatic cancer staging.

• 복식
• /
• 제53권2호
• /
• pp.35-55
• /
• 2003

The purpose of the study is to get some pieces of prior information to eventually develop competitive swimming suit designs with Korean traditional images. The study has been accomplished in following steps. First, as theoretical research, the history of swimming suit design and the requirements in designing competitive swimming suits were studied. Second, as practical research, at first, the trend of the competitive swimming suit designs in the national swimming suit market was examined. And then. the questionnaire surveys of both professional and amateur swimmers about their design preferences with purchasing and fabric-related tendencies were conducted for understanding professionals' characters more exactly. This data were analyzed through cross-analysis and multi-response analysis and x 2 was used. The results of this study can be summarized as follows : First, athletes' preferential design tendency for the swimming suit designs were examined in the aspects of style, color, pattern, logo, and accessary. In style, female athletes preferred an athletic one-piece style and male ones preferred a brief style. In color. neutral, mostly black was preferred most and cold color group like dark blue and navy blue next, regardless of sex. In addition, they preferred similar color coordination. In pattern, though solid fabrics were mostly preferred in both sexes, especially Taeguk motive were considered the most appropriate pattern to show Korean image. Besides, logo was considered importantly, and swimming caps and goggles of accessaries were generally used. Second, athletes' swimming suit purchasing tendency was as a following. the number of swimming suits possessed was more than 4 pieces. the durable period was less than 3 months. and the most important point considered in purchasing was an easy fitting for men and a design with an easy fitting for women. And most of swimming athletes preferred foreign products than domestic ones, which was attributed to excellent quality, easy fitting, and good design. and so on. Third, in fabric-related tendency, food touch, easy fitting. and opaqueness were considered importantly. and durability to chlorine, elasticity, color fastness, easy draining, lightness, and so on were demanded forward.

• 대한화장품학회지
• /
• 제45권2호
• /
• pp.131-138
• /
• 2019

Carbonylated proteins (CPs)은 단백질의 염기성 아미노산 잔기들과 지질 과산화 중 생성되는 알데히드 화합물과의 화학적 반응을 통하여 만들어진다. CP는 UVA와 청색 광선 영역의 빛을 흡수하여 흥분하며, CP의 감광 반응을 통해 superoxide anion radicals ($^{\cdot}O_2{^-}$)이 생성되고 각질층(Stratum corneum, SC)에서 reactive oxygen species (ROS) 생성을 통해 새로운 protein carbonylation이 진행되는 것이 알려졌다. 또한, superoxide anion radicals이 SC에서 CP를 생성하며 색상과 수분 기능을 포함한 피부 상태에 영향을 미치는 것으로 보고되었다. 따라서, 본 연구의 목적은 피부 각질층에 존재하는 stratum corneum carbonylated protein (SCCP)의 생성량과 피부 탄력 개선의 상관정도를 알아보는 것이었다. 이를 위하여 46명의 건강한 피험자들을 대상으로 8주간 피부임상실험을 진행하였다. 8주간 진행한 피부임상시험은 피험자를 두 그룹으로 나누어, 한 그룹은 아무것도 함유하지 않은 크림을 사용하고, 다른 그룹은 탄력개선 원료가 함유된 크림을 사용하였다. 임상시험 측정 항목은 DUB scanner를 이용한 진피 치밀도 측정, Primos를 이용한 주름 측정을 진행하였으며 탄력 측정은 dermal torque meter (DTM310)와 Balistometer (BLS780)를 통해 진행하였다. SCCP측정은 피험자의 뺨에서cyanoacrylate를 이용한 skin surface biopsy (SSB)방법을 이용하여 각질을 채취한 후, 비침습적인 검출 방법을 이용해 SCCP의 양을 조사하였다. 측정은 0주, 4주, 8주 총 3회에 걸쳐서 진행하였으며 각 주차의 측정값을 각각 분석하여 종합적인 결과를 비교하였다. 그 결과, SC에 존재하는 CP의 양은 피부 주름 및 피부 탄력성과 관련된 생물학적 인자의 수치가 개선됨에 따라 감소하는 것을 확인하였다. 이를 통해 항노화 효과에 있어서 탄력 개선과 CP양의 상관관계를 확인하여, 차후 피부 항노화 시험방법에 응용할 수 있음을 확인하였다.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.111-119
• /
• 2015

다양한 HMD(Head Mounted Display)의 등장으로 입체영상 제작은 VR(Virtual Reality)기술을 접목 가능하게 되었고 체감형, 몰입형 영상콘텐츠 제작의 활성화에 기여하고 있다. VR기반 영상콘텐츠는 애니메이션과 게임으로 시작하여 실사영상에 이르기까지 엔터테인먼트산업 전반으로 활용성을 넓혀가고 있으며 동시에 VR 영상콘텐츠 제작을 위한 솔루션 개발도 탄력을 받고 있다. 그러나 기존의 제작 솔루션 중 고정된 양안카메라 기반촬영은 사용자의 양안시차가 고정된다는 한계점을 가지고 있다. 이것은 제작자가 연출하고자 하는 표현을 제한할 뿐만 아니라 사용자입장에서의 시야조건이 고려되지 않아 입체감과 공간감을 충분히 느끼지 못할 수 있다. 본 논문은 실사 VR 영상콘텐츠 제작에서 발생하는 컨버전스 포인트(Convergence Point) 조절의 한계를 입체영상 제작의 후반작업 기술을 통하여 해결하고자 한다. 입체영상 후반작업에서 컨버전스 포인트 조절에 대한 유효성을 양안시차의 시각화를 통하여 분석하고 게임엔진에 적용하여 컨버전스 포인트가 사용자 임의로 조절 가능하도록 구현한다.

• 복식
• /
• 제61권5호
• /
• pp.1-20
• /
• 2011

As a follow-up of a study on design strategies to improve Korea's Korean coast guarduniforms, this study set out to propose Korean coast guard uniforms of a new concept that would meet the changing needs of the times and match the advanced technology and work environments. Three concepts of classical, nautical and techno chic were identified from the design strategies of the previous study. Using the results from a prototype show and preference survey, the investigator divided items into design, color, material, and detail and reflects demands for each of them. As a result, design was examined in four aspects of identity, acknowledgement, unity, and practicality and focused its improvement factors on design differentiated from other organizations' uniforms including ground police, segmentation of size system, adjustment of the length of upper garment to consider activity, and changes to the lines and silhouette to give out a modern image. As for color, the focus was placed on differentiated colors from other organizations' uniforms including ground police through dark blue and ocean color, change toward colors that reflect environmental characteristics, and unity in colors between the summer and winter uniform. As for material, the focus of improvement was put on elasticity, resistance against contamination, warmth retention, texture, wearing sensation, and functionality by taking into account convenience for field workers on coast guard vessels and branch offices who have much time in contact with ocean environments in order to make the materials high-grade. As for detail, structural details were added to give out a modern image such as changing the detail lines, efficiency of storage space, buttons, sleeve hems, ironing lines, and neck collars by taking into account environmental characteristics. The significance of the study lies in that it proposed a development model for large-scale uniform copy design by establishing copy design that secures functionality and is proper for an organization's social and cultural environment.