• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.26-32
• /
• 2001

본 논문은 고정식 방파제를 포함한 초대형 부유식 해상공항의 파도 중에서 유탄성 응답을 계산하는 방법을 제시하였다. 방파제 효과를 고려한 방사문제와 산란문제를 해석하기 위하여 소오스-다이폴 분포법을 사용하였고, 구조물의 응답은 자유-자유 보의 고유 모드함수에 의한 모드 해석법을 사용하여 계산하였다. 계산 모델로 길이가 1000m의 해상공항 구조물을 도입하였고, 방파제의 효과를 살펴보기 위해 입사파의 주기, 강성, 방파제와 해상공항 사이의 간격을 변화시키면서 수직 응답 및 모우멘트 등을 계산하였다.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.309-320
• /
• 2018

In this paper, a numerical study using finite element method with considering soil-structure interaction was conducted to investigate the stress and deformation behavior of a sheet pile wall structure. In numerical model, one of the nonlinear elastic material constitutive models, Duncan-Chang E-v model, is used for describing soil behavior. The hard contact constitutive model is used for simulating the behavior of interface between the sheet pile wall and soil. The construction process of excavation and backfill is simulated by the way of step loading. We also compare the present numerical method with the in-situ test results for verifying the numerical methods. The numerical analysis showed that the soil excavation in the lock chamber has a huge effect on the wall deflection and stress, pile deflection, and anchor force. With the increase of distance between anchored bars, the maximum wall deflection and anchor force increase, while the maximum wall stress decreases. At a low elevation of anchored bar, the maximum wall bending moment decreases, but the maximum wall deflection, pile deflection, and anchor force both increase. The construction procedure with first excavation and then backfill is quite favorable for decreasing pile deflection, wall deflection and stress, and anchor forces.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.19-26
• /
• 2002

In this paper, the nonlinear structural analysis for the composite structure of the spent nuclear fuel disposal container and the 50cm thick bentonite buffer is carried out to predict the collapse of the container while the sudden rock movement of 10cm is applied on the composite structure. This sudden rock movement is anticipated by the earthquake etc. at a deep underground. Horizontal symmetric rock movement is assumed in this structural analysis. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the container(cast iron insert, copper outer shell and lid and bottom). Analysis results show that even though very large deformations occur beyond the yield point in the bentonite buffer, the container structure still endures elastic small strains and stresses below the yield strength. Hence, the 50cm thick bentonite buffer can protect the container safely against the 10cm sudden rock movement by earthquake etc.. Analysis results also show that bending deformations occur in the container structure due to the shear deformation of the bentonite buffer. The elastoplastic nonlinear structural analysis for the composite structure of the container and the bentonite buffer is performed using the finite element analysis code, NISA.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.223-233
• /
• 2011

세라믹 모노리스 촉매는 두 계층으로 구성된 하니컴 구조이다. 하니컴 구조는 열유동 및 구조해석에서 연속체로 고려한다. 하니컴 구조의 등가 기계적 물성은 유한요소해석(FEA) 시험편으로부터 얻어진다. 강도 시험과 FEA는 ASTM C1674-08에서 소개된 사각 단위 셀 시험편과 시험방법에 의해 각각 달성되었다. 코제라이트 세라믹 층과 워시코트 층 사이의 접합계수는 거의 0이다. FEA 시험편은 접합계수에 기반한 모델로 만들어진다. 세라믹 모노리스 담체에서 탄성계수, 푸아송 비와 열적 물성은 FEA 시험편에 의해 결정하였다.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.283-291
• /
• 2005

Accurate seismic analyses of large deformable moving structures are still unsolved problems in the field of earthquake engineering. In order to analyze these problems, the nonlinear finite element method formulated by the absolute nodal coordinate approach is noticed. Because, this formulation has several advantages over the standard procedures on mass matrix, elastic forces and damping forces in the case of large displacement problems. But, it has not been fully studied to build frame structure models by using beam elements in the absolute nodal coordinate formulation. In this paper, we propose the connecting method of the beam elements formulated by the absolute nodal coordinate. The coordinate transformation matrix of this element is introduced into the frame structure. This beam element has the characteristic that the mass matrix and bending stiffiness matrix are constant even if in the case of large displacement problems, and this characteristic is being kept after the transformation. In order to verify the proposed method, we show the numerical simulation results of frame structures for a vibration problem and a large displacement problem.

• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.715-724
• /
• 2020

The influence on flexural strength of Glass/Epoxy laminated composite curved panels of different geometries (cylindrical, spherical, elliptical, hyperboloid and flat) due to inclusion of nano cenosphere filler examined in this research article. The deflection responses of the hybrid structure are evaluated numerically using the isoparametric finite element technique and modelled mathematically via higher-order displacement structural kinematics. To predict the deflection values, a customised in-house computer code in MATLAB environment is prepared using the higher-order isoparametric formulation. Subsequently, the numerical model validity has been established by comparing with those of available benchmark solution including the convergence characteristics of the finite element solution. Further, a few cenosphere filled hybrid composite are prepared for different volume fractions for the experimental purpose, to review the propose model accuracy. The experimental deflection values are compared with the finite element solutions, where the experimental elastic properties are adopted for the computation. Finally, the effect of different variable design dependent parameter and the percentages of nano cenosphere including the geometrical shapes obtained via a set of numerical experimentation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.345-350
• /
• 2001

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. 1T-CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the 1T-CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the 1T-CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard 1T-CT specimen test were performed. 4-point bending jig was manufactured for pipe test and direct current potential drop method was used to measure the crack extension and length for pipe test. From the pipe and the 1T-CT specimen test results, it was observed that the J-integral of the 1T-CT specimen test at the crack initiation point was very small compare to that of the pipe specimen test.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.47-56
• /
• 2001

In order to prevent the possibility of mixing of metal powder during food grinding processing with the metal roll mill this study was conducted to develope the materials of ceramics roll as a substitute of gray cast iron mill. Since the ceramics is brittle material and can be broken easily by a crack, it was needed to develope engineering ceramics roll materials with high elastic modulus and fracture toughness. Adding 0∼50 wt% Al$_2$O$_3$as densification additives to porcelain body material and forming the ceramics an different condition, mechanical properties were evaluated. The material structure’s densification process was analyzed by SEM and XRD. The evaluation of the mechanical properties of ceramics roll materials were compared and analyzed by non-destructive test using Young’s modulus and destructive test using 3-point bending strength and fracture toughness. The results showed several correlative results. Porcelain body material with 40 wt% Al$_2$O$_3$content heated at 1,200$\^{C}$ for 5h was high bulk density of 2.77, Young’s modulus of 118.4Gpa, 3-point bending strength of 137 MPa and fracture toughness of 2.88 MPa$.$m$\^$$\sfrac{1}{2}$/ . After analyzing the relationship between non-destructive test and destructive test, the coefficient of determination was more than 0.9. Therefore, the evaluation of non-destructive test by ultrasonic was turned out to be feasible in evaluating the mechanical properties of ceramics.

• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.1-7
• /
• 2012

The problem of laterally loaded piles is particularly a complex soil-structure interaction problem. The flexural stresses developed due to the combined action of axial load and bending moment must be evaluated in a realistic and rational manner for safe and economical design of pile foundation. The paper reports the finite element analysis of pile groups. For this purpose simplified models along the lines similar to that suggested by Desai et al. (1981) are used for idealizing various elements of the foundation system. The pile is idealized one dimensional beam element, pile cap as two dimensional plate element and the soil as independent closely spaced linearly elastic springs. The analysis takes into consideration the effect of interaction between pile cap and soil underlying it. The pile group is considered to have been embedded in cohesive soil. The parametric study is carried out to examine the effect of pile spacing, pile diameter, number of piles and arrangement of pile on the responses of pile group. The responses considered include the displacement at top of pile group and bending moment in piles. The results obtained using the simplified approach of the F.E. analysis are further compared with the results of the complete 3-D F.E. analysis published earlier and fair agreement is observed in the either result.