• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.263-279
• /
• 2022

With the span and arch rib size of concrete-filled steel tube (CFST) arch bridges increase, the hydration heat of pumped mass concrete inside large-size steel tube causes a significant temperature variation, leading to a risk of thermal stress-induced cracking during construction. In order to tackle this phenomenon, a hydration heat conduction model based on hydration degree was established through a nonlinear temperature analysis incorporating an exothermic hydration process to obtain the temperature field of large-size CFST. Subsequently, based on the evolution of elastic modulus based on hydration degree and early-age creep rectification, the finite element model (FEM) model and analytical study were respectively adopted to investigate the variation of the thermal stress of CFST during hydration heat release, and reasonable agreement between the results of two methods is found. Finally, a comparative study of the thermal stress with and without considering early-age creep was conducted.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.39-51
• /
• 2012

본 연구에서는 포항이암을 대상으로 다양한 경계조건에서의 creep 시험을 수행하여 이암의 시간의존적 특성을 분석하였으며, 이를 바탕으로 기존에 발표된 creep에 대한 점탄성 모델 및 경험식들과 비교 분석함으로써 더 합리적으로 creep 특성을 평가할 수 있는 방법을 제안하고자 한다. Creep 시험결과를 Griggs(1936), Cottrell(1952) 및 Singh(1975)이 제안한 경험식에 대하여 분석한 결과, 전반적으로 응력수준 및 함수비가 증가할수록 creep 상수가 증가하는 경향을 나타내었다. 또한, Singh의 경험식에 의한 예측치는 실측치와 매우 높은 상관성을 보이고 있는 것을 확인할 수 있었으며, 이로부터 이암의 크리프 거동을 해석함에 있어 Singh의 경험식을 적용함이 바람직할 것으로 판단된다. 유동학적 모델인 Burger 모델에 의한 예측치와 실측치를 비교한 결과, 매우 좋은 일치를 보이고 있음을 알 수 있으며, 이로부터 이암의 크리프 거동을 해석함에 있어 Maxwell 요소와 Kelvin 요소를 직렬로 연결한 Burger 모델을 적용하는 것이 바람직할 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.890-897
• /
• 2003

This paper compares engineering estimation schemes of C＊ and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C＊ and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C＊ and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C* and COD rate than the reference stress method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.557-562
• /
• 2007

In order to analyze the PSC box-girder bridge by the cantilever construction method, three dimensional analysis method using the PSC shell clement is suggested. The time dependent material functions are based on the ACI and CEB code. The time dependent concrete material properties considered are changes in strength, elastic modulus, creep and shrinkage. For the prestressing tendon, relaxation effects are considered. Anchorage and friction loses during tendon installations are also included. The ACI and CEB material models for creep and elastic modulus are also included.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.145-148
• /
• 1996

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.81-82
• /
• 2005

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.151-159
• /
• 2001

This study was performed to investigate the effect of time-dependent creep on the deformation. In the analysis, modified Cam-Clay model was adopted to describe the elastic-plastic behavior of clayey soil. In order to consider effect of creep, the secondary coefficient of consolidation $\alpha$ was supplemented to modified Cam-Clay model. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the experimental results. The results of the analysis were in good agreement with the observed values in the field.

• Structural Engineering and Mechanics
• /
• 제38권2호
• /
• pp.157-169
• /
• 2011

In this paper the time-dependent closed-form static solution of the suspended pre-stressed biconcave and biconvex cable trusses with unmovable, movable and elastic or viscoelastic yielding supports subjected to various types of vertical load is presented. Irvine's forms of the deflections and the cable equations are modified because the effects of the rheological behaviour needed to be incorporated in them. The concrete cable equations in the form of the explicit relations are derived and presented. From a solution of a vertical equilibrium equation for a loaded cable truss with rheological properties, the additional vertical deflection as a time-function is determined. The time-dependent closed-form model serves to determine the time-dependent response, i.e., horizontal components of cable forces and deflection of the cable truss due to applied loading at the investigated time considering effects of elastic deformations, creep strains, temperature changes and elastic supports. Results obtained by the present closed-form solution are compared with those obtained by FEM. The derived time-dependent closed-form computational model is used for a time-dependent simulation-based reliability assessment of cable trusses as is described in the second part of this paper.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.129-142
• /
• 1998

본 연구에서는 파괴강도이내의 일정하중 상태에서 장기적으로 진행되는 연약지반의 침하특성을 파악하기 위하여 Creep 변형성분을 고려한 구성방정식을 유도하고, 유한요소해석 프로그램을 개발하여 이를 바탕으로 토공구조물의 장기적인 변형을 합리적으로 예측함으로서 연약지반상 토공구조 물의 설계 및 시공관리에 기여하고자 하였다. 점성토의 탄.소성거동을 표현하기 위해 Modified Cam Clay모델이 사용되었으며, Creep변형을 계산하는데 있어서는 체적 Creep요소를 고려할 경우 2차 압밀계수 C,를 적용하였고, 축차 Creep요소를 고려할 경우 Singh & Mitchel Creep경험식을 통한 m, a, A 상수를 이용한 것으로 개발된 프로그램의 신뢰성을 검증하기 위하여 이론해 및 실험치와 비교하였고, 적용된 각 상수들의 민감도 를 분석한 결과, 개발된 프로그램은 적용성이 좋은 것으로 판단되었다. 또한 국내외 2개의 현장에 적용한 결과, 제방의 변형해석에 있어 Creep을 고려하지 않은 경우보다 Creep을 고려한 경우가 오차가 적게 나타나고 체적 Creep만을 고려한 경우는 약간 과소평가되 고 축차 Creep까지 고려한 경우는 약간 과대평가됨을 알 수 있었다. 따라서 Creep정수를 얻기 위한 실험기의 개발, 적정 토질정수의 선택 등 향후에도 지속적인 연구가 요구된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.606-612
• /
• 2008

Creep force is one of the only appeared at conventional train which used to be driven by metallic wheel and rail contact. Due to the elastic deformation of wheel/rail contact patch by the weights of wheel and all the components related to it, creep force generates and becomes to the decision factor of critical speed of bogie(or railway vehicle) which is the criteria of avoiding vehicle to be unstable. There are many kind of factors which affect generation of creep force at a wheel/rail contact surface such as viscosity of contact patch, velocity, wheel and rail geometric profile, mechanical properties of wheel and rail. This paper concentrates on a wheelset simple 2 DOF Equation of Motion being exerted. From the simple numerical analysis using linear solution about getting creep force some factors could find roughly. Among the factors geometric parameter could be the one of most important for this study. In the future we'll prolong the range of study to find out method of measuring creep force easily.