• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4701-4719
• /
• 2015

A Mobile Ad hoc Network (MANET) consists of mobile nodes which co-operate to forward each other's packets without the presence of any centralized authority. Due to this lack of centralized monitoring authority, MANETs have become vulnerable to various kinds of routing misbehaviour. Sometimes, nodes exhibit non-cooperating behaviour for conserving their own resources and exploiting others' by relaying their traffic. A node may even drop packets of other nodes in the guise of forwarding them. This paper proposes an efficient Reputation and Collaboration technique through route-request for handling such misbehaving nodes. It lays emphasis not only on direct observation but also considers the opinion of other nodes about misbehaving nodes in the network. Unlike existing schemes which generate separate messages for spreading second-hand information in the network, nodes purvey their opinion through route-request packet. Simulation studies reveal that the proposed scheme significantly improves the network performance by efficiently handling the misbehaving nodes in the network.

• Plant Journal
• /
• v.9 no.4
• /
• pp.37-42
• /
• 2013

Power plants have many components and equipment. It is difficult for operators to know the each equipment fails or what equipment fails. It is important to prevent failure in advance. Recently, outlook of maintenance tasks is changing from time based maintenance to condition based maintenance. In this study, we selected RCM-based maintenance intervals for coal handling equipment at coal power plant. For RCM analysis, we have made great progress in a maintenance task and interval. If we apply RCM analysis to the whole plant system, we can expect qualitative improvement and efficient operation of power plant system.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.1
• /
• pp.61-76
• /
• 2003

As people get broader access to health information through the internet, there is a greater need for measure to maximize the social advantages of the internet and to minimize negative side-effects. With this concern, this paper classifies internet health information services sites into : on-line supply of health information, on-line consultation, on-line diagnosis, and on-line sales. As well this paper analyzes domestic laws supporting and/or regulating these services. The efficient provision of internet health services requires comprehensive laws on individual privacy protection, prevention and handling of medical accidents, an electronic prescription form for internet diagnosis, electronic signing, payment for medical expenses, qualifications for internet medical practitioners. Additional laws are required to establish internet pharmacies and internet health goods stores. These new laws can be prepared either separately or through revision of existing laws governing medical practice, pharmacies, and public health promotion. However, as the legal control by the government on cyber processes and entities has a fairly minimal effect, consumers should be encouraged to improve their own capacity for wisely using internet health services and health-service providers should be encouraged to promote voluntary supervision and control of their own services and practices.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.10-17
• /
• 1993

An object-oriented database was developed as a framesork for integrating into ergonomic interface models data for workplace modelling and ergonomic evaluation functions as well as basic anthropometric data required to construct a man model. In order to develop an ergonomic man model representing operators that interact with his working evnironments, not only anthro- pometric data but also efficient handling of such data and accurate representation of the work- space are needed as a prerequistite to proper ergonomic evaluation. Most existing man models are not, however, capable of fully utilizing these data due to the lack of a generallized formalism of data handling, which results in system performance degradation or a potential difficulty when the system is upgraded. In this research, these three sets of data with distinct characteristics were incorporated into a comon integrated database required to manipulate an ergonomic interface model fully coupled with the man model itself. An object- oriented scheme was sued for the database design Specifically, UniSQL/X, an object-oriented database management system and the X-window system on SPARC workstation were used for implementation. The ergonomic man model generated from the object-oriented database is found to possess great flexibility and performance compared to existing ergonomic interface models or ergonomic CAD systems.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.167-168
• /
• 2009

As the rapid increase of the container trade, most of the container terminals strive to improve the container handling productivity. Therefore, they consider to find efficient operating strategies and to introduce new container handling facilities. In terms of equipment, there are a variety of types of quay cranes. Single-lift crane operates only one container regardless of size and twin-lift crane operates two 20' containers or one 40' container simultaneously. Tandem crane, recently introduced, can operate four 20' containers or two 40' containers simultaneously. In this paper, we propose the mathematical model and the solution procedure of the ship loading scheduling problem for the tandem crane.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.91-96
• /
• 2011

The handling ability of containers at the terminal strongly depends on the performance of the cargo handling system such as RTGC(Rubber Tired Gantry Crane) and RMGC(Rail Mounted Gantry Crane). This paper introduces a guide line measurement system on the operating condition, in which two camera are installed to detect the guide line. Because the line tracking is the basic technique for control system design of RTGC, it is necessary to develop a useful and reliable measurement system. If the displacement and angle of the RTGC relative to a guide line as the trajectory to follow is obtained, the position of RTGC is automatically calculated. Therefore, in this paper, a camera-based measurement system is introduced. The proposed measurement system is robust against light fluctuation and cracks of the guide line. This system consists of two camera and a PC which are installed at the lower side of the RTGC. Two edges of the guide line are detected from an input image taken by the cameras in the moving state, and these positions are determined in a Hough parameter space by using the Hough transformation method. From the experimental results, the accuracy and usefulness of the proposed system is evaluated by comparing other instruments.

• Restorative Dentistry and Endodontics
• /
• v.40 no.1
• /
• pp.1-13
• /
• 2015

Advancements in bio-ceramic technology has revolutionised endodontic material science by enhancing the treatment outcome for patients. This class of dental materials conciliates excellent biocompatibility with high osseoconductivity that render them ideal for endodontic care. Few recently introduced bio-ceramic materials have shown considerable clinical success over their early generations in terms of good handling characteristics. Calcium enriched mixture (CEM) cement, Endosequence sealer, and root repair materials, Biodentine and BioAggregate are the new classes of bio-ceramic materials. The aim of this literature review is to present investigations regarding properties and applications of CEM cement in endodontics. A review of the existing literature was performed by using electronic and hand searching methods for CEM cement from January 2006 to December 2013. CEM cement has a different chemical composition from that of mineral trioxide aggregate (MTA) but has similar clinical applications. It combines the biocompatibility of MTA with more efficient characteristics, such as significantly shorter setting time, good handling characteristics, no staining of tooth and effective seal against bacterial leakage.

• Wind and Structures
• /
• v.18 no.4
• /
• pp.347-373
• /
• 2014

Since its development in the early 1980's the force balance technique has become a standard method in the efficient determination of structural loads and responses. Its usefulness lies in the simplicity of the physical model, the relatively short records required from the wind tunnel testing and its versatility in the use of the data for different sets of dynamic properties. Its major advantage has been the ability to provide results in a timely manner, assisting the structural engineer to fine-tune their building at an early stage of the structural development. The analysis of the wind tunnel data has evolved from the simple un-coupled system to sophisticated methods that include the correction for non-linear mode shapes, the handling of complex geometry and the handling of simultaneous measurements on multiple force balances for a building group. This paper will review some of the components in the force balance data analysis both in historical perspective and in its current advancement. The basic formulation of the force balance methodology in both frequency and time domains will be presented. This includes all coupling effects and allows the determination of the resultant quantities such as resultant accelerations, as well as various load effects that generally were not considered in earlier force balance analyses. Using a building model test carried out in the wind tunnel as an example case study, the effects of various simplifications and omissions are discussed.

• Steel and Composite Structures
• /
• v.42 no.1
• /
• pp.123-137
• /
• 2022

The fundamental period (FP) is one of the most critical parameters for the seismic design of structures. In the reinforced concrete (RC) infilled frame, the infill walls significantly affect the FP because they change the stiffness and mass of the structure. Although several formulas have been proposed for estimating the FP of the RC infilled frame, they are often associated with high bias and variance. In this study, an efficient soft computing model, namely the group method of data handling (GMDH), is proposed to predict the FP of regular RC infilled frames. For this purpose, 4026 data sets are obtained from the open literature, and the quality of the database is examined and evaluated in detail. Based on the cleaning database, several GMDH models are constructed and the best prediction model, which considers the height of the building, the span length, the opening percentage, and the infill wall stiffness as the input variables for predicting the FP of regular RC infilled frames, is chosen. The performance of the proposed GMDH model is further underscored through comparison of its FP predictions with those of existing design codes and empirical models. The accuracy of the proposed GMDH model is proven to be superior to others. Finally, explicit formulas and a graphical user-friendly interface (GUI) tool are developed to apply the GMDH model for practical use. They can provide a rapid prediction and design for the FP of regular RC infilled frames.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.387-392
• /
• 2014

Now a days, there are various application functions to transmit from vehicles to the Internet and vice versa. And the communication can be operated through a roadside infrastructure including with possible use of routing protocols. Specifically, autonomous vehicles for remote driving and monitoring requires transmitting of high depth of multimedia such as video. Especially in a populated urban area, an efficient network is vital because of handling a great amount of the data. Therefore, in this paper, efficient network topology for a crossroad in urban area is suggested by performance evaluation of vehicular networks using a wireless LAN and a routing protocol. For the performance evaluation, various vehicular network topologies are designed and simulated in OPNet simulator.