• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1795-1804
• /
• 2014

Owing to the reduction in the peak power of a DC railway subsystem, many studies on energy storage system (ESS) applications have received attention. Each application focuses on improving the efficiency and addressing regulation issues by utilizing the huge regenerative energy generated by braking-phase vehicles. The ESS applications are widely divided into installation on a vehicle or in a substation, depending on the target system characteristics. As the main purpose of the ESS application is to reduce the peak power of starting-phase vehicles, an optimized ESS utilization can be achieved by the operating at the highest peak power section. However, the weight of an entire vehicle, including those of the passengers, continuously changes during operation; thus, considering the total power consumption and the discharging point is difficult. As a contribution to the various storage device algorithms, this study deals with ESS on board vehicles and introduces an ESS operating plan for peak-power reduction by investigating the weight of a train on a real-time basis. This process is performed using a train-performance simulator, and the simulation accuracy can be increased because the weight in each phase can be adopted in the simulation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.55-62
• /
• 2008

This study investigated the status and problems of marine-related environmental impact assessment and a utilization-consultation system in Korea and suggested improvement of the review organization. Also, it conducted SWOT analysis based on evaluation of functions, roles and performance of the marine environmental impact assessment center and proposed development strategies of the center through introduction of expert opinions and advanced systems. The performance statement-review by the center in 2007 included 358 cases in total; 165 (46.1%) for consultation on utilization of sea area, 104 for environmental impact assessment (29.0%), and 89 (24.9%) for prior environmental review. The consultation on utilization of sea area can be divided into that for public water surface-use (41%) and reclamation (32%), and sea aggregate extraction process (21%). Although bad impacts on marine environment are reducing under the current system, there are some limits and problems to supplement it in terms of content, system and operation. Review system on sea area utilization-impact(marine environmental impact assessment center) by marine environmental management law needs to obtain expertise, fairness and efficiency and, to do so, have operational supports and institutional improvement to maximize its own functions and roles. At the same time, it is necessary for the center to establish identity and the status as a professional review organization by setting active development strategies inside the center. Finally, it should strengthen an consultation system of marine environmental impact assessment led by the related ministry to achieve effective coastal management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4844-4864
• /
• 2017

Interference-aware routing protocol design for underwater wireless sensor networks (UWSNs) is one of the key strategies in reducing packet loss in the highly hostile underwater environment. The reduced interference causes efficient utilization of the limited battery power of the sensor nodes that, in consequence, prolongs the entire network lifetime. In this paper, we propose an energy-efficient interference-aware routing (EEIAR) protocol for UWSNs. A sender node selects the best relay node in its neighborhood with the lowest depth and the least number of neighbors. Combination of the two routing metrics ensures that data packets are forwarded along the least interference paths to reach the final destination. The proposed work is unique in that it does not require the full dimensional localization information of sensor nodes and the network total depth is segmented to identify source, relay and neighbor nodes. Simulation results reveal better performance of the scheme than the counterparts DBR and EEDBR techniques in terms of energy efficiency, packet delivery ratio and end-to-end delay.

• Advances in Energy Research
• /
• v.4 no.2
• /
• pp.107-120
• /
• 2016

The aim of this research is to apply the eQuest model to investigate the energy conservation in a multifamily building located in Dayton, Ohio by using a Trombe wall and an ammonia ground source heat pump (R-717 GSHP). Integration of the Trombe wall into the building is the first retrofitting measure in this study. Trombe wall as a passive solar system, has a simple structure which may reduce the heating demand of buildings significantly. Utilization of ground source heat pump is an effective approach where conventional air source heat pump doesn't have an efficient performance, especially in cold climates. Furthermore, the type of refrigerant in the heat pumps has a substantial effect on energy efficiency. Natural refrigerant, ammonia (R-717), which has a high performance and no negative impacts on the environment, could be the best choice for using in heat pumps. After implementing the eQUEST model in the said multifamily building, the total annual energy consumption with a conventional R-717 air-source-heat-pump (ASHP) system was estimated as the baseline model. The baseline model results were compared to those of the following scenarios: using R-717 GSHP, R410a GSHP and integration of the Trombe wall into the building. The Results specified that, compared to the baseline model, applying the R-717 GSHP and Trombe wall, led to 20% and 9% of energy conservation in the building, respectively. In addition, it was noticed that by using R-410a instead of R-717 in the GSHP, the energy demand increased by 14%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.316-320
• /
• 2001

Sixteen growing crossbred Anglo-Nubian goats, 10-12 months old, pre-experimental average body weights of $18.3{\pm}0.28kg$ were randomly allotted to four diets to investigate the efficiency of utilisation of diets containing increasing levels of desiccated coconut waste meal (DCWM) in the tropical environment of Samoa, South Pacific region. The four diets were designated as 1, 2, 3 and 4. Diet 1 that has no DCWM served as the control, while diets 2, 3 and contained different levels of DCWM. Voluntary concentrate intake, growth rate, feed efficiency and nutrient digestibility coefficients were measured. Gross energy (GE) and organic matter (OM) values of the diets increased linearly with increase in the levels of DCWM in the diets. Voluntary concentrate intake decreased with increasing proportion of DCWM in the diets. Forage intake increased with increase in the levels of DCWM diets offered to the growing goats. Total voluntary feed intakes were statistical significant (p<0.05) and the goats on diet 4 had the least intake followed by those on diet 3. Goats an diets 1 and 2 were different in total feed intake but not at a significant level (p>0.05). Feed efficiency (FE) followed the trend of voluntary concentrate intake and daily live weight gains. Dry matter digestibility (DMD) was significantly different (p<0.05) among the goats offered the different diets. DMD improved with increasing levels of DCWM. The goats accepted all, the diets that were compounded with the different levels of dried DCWM and this seems to suggest that DCWM have no deleterious effects. However, the best level at which dried DCWM could replace brewers dried grains in the diets of growing goats is at 38.5% (diet II). Based on voluntary feed intake, live-weight gain and apparent nutrient digestibility coefficients of the goats it could be concluded that DCWM based diets merits further attention as a locally available feed source in ruminants nutrition in the Pacific Island countries where feed availability is seasonal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1624-1632
• /
• 2020

Objective: A total of three hundred unsexed ducks were utilized to estimate net energy requirements of maintenance (NE_m) and weight gain (NE_g) for 2 to 3-week-old Cherry Valley ducks and to establish a model equation to predict NE requirements using the factorial method. Methods: To determine the apparent metabolizable energy (AME) of the diet, fifty 7-day-old ducks at approximately equal body weights (BWs) were randomly assigned into five groups that were fed at different levels (ad libitum, 85%, 75%, 65%, and 55% of ad libitum intake), and the endogenous acid-insoluble ash as indigestible marker. The two hundred and fifty 7-day-old ducks were used for a comparative slaughter experiment. At the beginning of the experiment, ten ducks were sacrificed to determine the initial body composition and energy content. The remaining ducks were randomly assigned into five groups (same as metabolic experiment). Ducks of the ad libitum group were slaughtered at 14 and 21-day-old. At the end of the experiment, two ducks were selected from each replicate and slaughtered to determine the body composition and energy content. Results: The results of the metabolizable experiment showed AME values of 13.43 to 13.77 MJ/kg for ducks at different feed intakes. The results of the comparative slaughter experiment showed the NE_m value for 2 to 3-week-old Cherry Valley ducks was 549.54 kJ/kg of BW^0.75/d, and the NE_g value was 10.41 kJ/g. The deposition efficiency values of fat (K_f) and crude protein (K_p) were 0.96 and 0.60, respectively, and the values of efficiency of energy utilization (K_g) and maintenance efficiency (K_m) were 0.75 and 0.88, respectively. Conclusion: The equation for the prediction of NE requirements for 2 to 3-week-old Cherry Valley ducks was the following: NE = 549.54 BW^0.75+10.41 ΔW, where ΔW is the weight gain (g).

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.587-594
• /
• 1995

In order to estimate the nutritive value of roasted full-fat soybean (FFS) in carp diet, growth performance and excretion of protein and phosphorus were examined using carps having mean body weight of 111 g. Growth trial was conducted for 4 weeks using the fishes fed 5 diets (Control, $F_{24}S_{13}$, $F_{16}S_{27}$, $F_8S_{40}$ and $F_0S_{56}$) containing 32%, 24%, 16%, 8% and 0% of fish meal (F) and 0%, 13%, 27%, 40% and 56% of full-fat soybean, respectively. A total of 800 fishes were allotted randomly by groups of 40 to 5 treatments with 4 replicates per treatment. Fishes were fed to station eight times daily. Feeding trial was conducted for 4 weeks. As dietary FFS increased from 0% to 56%, weight gain of fish decreased from 91 g to 39 g and feed conversion ratio increased from 1.06 to 1.95. Protein efficiency ratio (PER) was highest (2.35) in control group which had the highest protein intake, while PER significantly decreased with decrease in protein intake as dietary FFS level increased. Although dietary protein and energy levels were maintained constant, protein excretion per kg weight gain varied from 273 g to 579 g for the groups control and $F_0S_{56}$, respectively. However, the value for control group was not significantly different to those for the groups $F_{24}S_{13}$ and $F_{16}S_{27}$. On the other hand, the highest protein retention efficiency was found in group fed the diet $F_{24}S_{13}$. Fish fed the diet $F_8S_{40}$ excreted the lowest phosphorus (P) based on kg weight gain showing the highest P retention efficiency of 62%. P excretion per kg feed intake was in the range of 5 g to 10 g for the groups $F_8S_{40}$ and $F_{24}S_{13}$, respectively. The present results indicated that as dietary FFS level increased, growth performance and feed utilization decreased while excretion of protein and phosphorus increased. Therefore, it was concluded that more than 25% substitution by FFS for fish meal could exert negative effects on growth and feed utilization of carp.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1213-1220
• /
• 2010

This experiment evaluated the effects of dietary lysine restriction and energy density on growth performance, nutrient digestibility and meat quality of finishing pigs. A $2{\times}2$ factorial arrangement of treatments was utilized in a randomized complete block (RCB) design, and factor 1 was lysine restriction and factor 2 was energy density. The control diet was formulated to contain 3.265 Mcal of ME/kg, 0.75% lysine in the early-finishing phase and 3.265 Mcal of ME/kg, 0.60% lysine in the late-finishing phase and other nutrients met or exceeded NRC (1998) standards. Compared to the control diet (CON), lysine levels of experimental diets were restricted to 15% (treatment EL, EEL) or 30% (treatment ELL, EELL), whereas energy level of experimental diets was increased by 0.100 or 0.200 Mcal of ME/kg. A total of 100 crossbred pigs ([Yorkshire${\times}$Landrace]${\times}$Duroc), with average initial body weight of $58.47{\pm}1.42\;kg$, were allotted to 5 dietary treatments based on sex and body weight. Each treatment had 5 replicates with 4 pigs (two barrows and two gilts) per pen. ADG, ADFI and feed efficiency were calculated in an 8-week growth trial. In the late finishing period (5-8 weeks), pigs fed ELL or EELL diets had decreased ADG and feed efficiency (p<0.01), however, when the EEL diet was provided, a similar growth performance was observed compared to those fed the CON diet during the whole experimental period (p>0.05). In a metabolic trial, 15 pigs were used to evaluate the effect of dietary lysine restriction and energy density on nutrient digestibility. The digestibility of dry matter, crude fat and crude ash was not improved by restricting dietary lysine or energy density. However, crude protein digestibility was decreased (p<0.05) as dietary lysine was restricted. When dietary lysine was restricted, fecal nitrogen was increased whereas nitrogen retention was decreased. BUN concentration was affected by dietary lysine restriction; treatments ELL and EELL had higher BUN values than other treatments (p<0.01). Carcass characteristics and meat quality were measured when average body weight of pigs reached $107.83{\pm}1.50\;kg$. Treatment ELL had higher last rib backfat depth (p<0.05) than treatment CON, but ELL and EEL did not differ significantly. The ELL and EEL treatments had higher (p<0.05) subjective marbling score than treatment CON. Treatment EEL showed higher longissimus fat content than treatment EL and CON (p<0.01). The results indicated that finishing pigs fed a diet with 15% lysine restriction and 3.465 Mcal of ME/kg energy density had no detrimental effects on growth performance and N utilization, and could achieve substantial increases in marbling and longissimus fat content of pork.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.59-71
• /
• 1986

Net production, dead material increments were measured, and annual respiration loss was simulated through a year to determine the gross production at the Phragmites longivalvis, Carex scabrifolia and Zoysia sinica stand on Okryudeung, a sand bar of the Nagdong river estuary. The maximum live biomass for above-ground organs of the three stands occured in October, i.e., 1, 985, 744 and 1, 013g/m2, and belowground net productions were estimated to be 650, 440 and 412g/m2, respectively. Materials died or shedding from live aboveground organs during the growth season were estimated to be 167, 81 and 0 g/$m^2$. From the results of simulation, annual variation of respiratiion was primarily dependent on the annual variation of temperature through a year. For annual respiration loss in three stands, 21.893, 6.147 and 5.036kg $CO_2/m^2$ were calculated, respectively. Corresponding gross productions were 72, 203, 22, 109 and 19, 909kcal/$m^2$. Respiration of belowground organs corresponded to 65%, 66% and 37% of the total plant respiration, and annual respiration loss accounted for 85%, 78% and 71% of the annual gross production. In view of efficiency of solar energy utilization, 5.8%, 1.8% and 1.6% of incident light energy were converted to gross production of plants during a year. With incident light energy during the growth season from April to September, energy utilizations for net production were estimated to be 1.2%, 0.4% and 0.6% at the three stands.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.300-309
• /
• 2012

Long endurance is a key issue in the application of unmanned aerial vehicles. This study presents feasibility test results when fuel cell system as an alternative to the conventional engine is applied for the power of the UAV after the 150W fuel cell system is developed and packaged to the 1/4 scale super cub airplane. Fuel cell system is operated by dead-end method in the anode part and periodically purged to remove the water droplet in flow field during the operation. Oxygen in the air is supplied to the stack by the two air blowers. And fuel cell stack is water cooled by cooling circuit to dissipate the heat generated during the fuel cell operation. Weight balance is considered to integrate the stack and balance of plant (BOP) in package layout. In flight performance test, we demonstrated 4 times standalone take-off and landing. In the laboratory test simulating the flight condition to quantify the energy flow, the system is analyzed in detail. Sankey diagram shows that electric efficiency of the fuel cell system is 39.2%, heat loss 50.1%, parasitic loss 8.96%, and unreacted purged gas 1.67%, respectively compared to the total hydrogen input energy. Feasibility test results show that fuel cell system is high efficient and appropriate for the power of UAV.