• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.239-246
• /
• 2011

Groundwater in small islands is used as main water resource but the overuse of groundwater may cause seawater intrusion and temperature decrease in geothermal wells. This study aimed to characterize the hydrogeology of Maeum-ri area in Seokmo Island of Ganghwagun using long-term monitoring at groundwater wells and geothermal wells. In the monitoring period seasonal water level change, consistent drop or increase of water levels are not detected. The groundwater temperature about 10m below ground surface shows year cycle variation having two to five months difference with ambient temperature cycle. The storativity was calculated by tidal method. The storativity estimated by adapting tidal efficiency factor showed some larger values than that by using tidal time lag. The result suggested that the tidal method assuming several assumptions on aquifer condition may produce broad ranges but the calculated ranges at this application are reasonable. The similar shape of groundwater level change and tidal effects was observed at several wells clustered east-south-east direction which may implicate the distribution of vertical fracture system strongly related with groundwater flow channels. The applied methodology and study results will bc valuable to evaluate optimal pumping rate for the preservation of groundwater resources, and to manage geothermal development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.293-300
• /
• 2007

As the development of the various IP-based services, it is expected that Internet telephony service will gradually replace the traditional PSTN-based telephony service. But there are many issues resolved to spread the Internet telephony service. One of them is to support the emergency services in the Internet telephony. In the case of USA, it has been regulated that 911 services should be supported in the Internet telephony services using VoIP on the similar performance level to PSTN 911 service. According to the regulation, basic VoIP 911 calls should be routed to the general access line of LEA without the location information or the callback number, but the enhanced VoIP 911 calls with the location information and callback number should be routed on the dedicated 911 network and destined to the local 911 distribution center such as PSAP. But, in the current VoIP-based Internet telephony network, the emergency call service has not been handled as one of the special services as well at has a worse performance in comparison to it on PSTN. Moreover, the service has a critical problem that it can not be destined to the nearest PSAP because of the insufficient information about the location information and the call back number. In this paper, we suggest the SIP-based emergency call service mechanism in order to resolve the problems above mentioned. This suggested mechanism is implemented to show its effectiveness and efficiency.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.57-66
• /
• 2021

In this study, we attempted to separate and recover Cu from low-grade copper ore by a hydrometallurgical process. The leaching sample obtained after crushing and sieving by 0.355 mm of low-grade copper ore contained 1.5% Cu, 4.7% Fe, 1.0% Mn, and 0.3% Zn. The Cu in the oxide ore was very well leached into sulfuric acid and 97% Cu leaching efficiency was achieved at 80℃ and 3 M sulfuric acid (H₂SO₄). From the leaching solution, Cu was separated by solvent extraction from Fe, Mn, and Zn using LIX984N. The separation tendency between Cu and other metals was confirmed through the distribution ratio and separation factor. By plotting the McCabe-Thiele Diagram, the optimum condition for recovering Cu is 5 vol.% LIX984N, 2-stage counter-current solvent extraction, and an O/A ratio of 0.5. Using this method, 99% of the Cu was extracted and a CuSO₄ solution was finally obtained that contained 1.6 g/L Cu after the stripping process using 2 M H₂SO₄.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.131-141
• /
• 2022

Future battlefield domains are expanding to ground, sea, air, space, and cyber, so future military operations are expected to be carried out simultaneously and complexly in various battlefield domains. In addition, the application of convergence technologies that create innovations in all fields of economy, society, and defense, such as artificial intelligence, IoT, and big data, is being promoted. However, since the current Korean military C4I system manages warfighting function DBs in one DB server, the efficiency of combat performance is reduced utilization and distribution speed of data and operation response time. To solve this problem, research is needed on how to apply the 4th industrial revolution technologies such as AI, IoT, 5G, big data, and cloud to the Korean military C4I system, but research on this is insufficient. Therefore, this paper analyzes the problems of the current Korean military C4I system and proposes to apply the 4th industrial revolution technology in terms of operational mission, network and data link, computing environment, cyber operation, interoperability and interlocking capabilities.

• Journal of KIISE:Databases
• /
• v.34 no.1
• /
• pp.1-17
• /
• 2007

As XML is becoming a de facto standard for distribution and sharing of information, the need for an efficient yet secure access of XML data has become very important. To enforce the fine-level granularity requirement, authorization models for regulating access to XML documents use XPath which is a standard for specifying parts of XML data and a suitable language for both query processing. An access control environment for XML documents and some techniques to deal with authorization priorities and conflict resolution issues are proposed. Despite this, relatively little work has been done to enforce access controls particularly for XML databases in the case of query access. Developing an efficient mechanism for XML databases to control query-based access is therefore the central theme of this paper. This work is a proposal for an efficient yet secure XML access control system. The basic idea utilized is that a user query interaction with only necessary access control rules is modified to an alternative form which is guaranteed to have no access violations using tree-aware metadata of XML schemes and set operators supported by XPath 2.0. The scheme can be applied to any XML database management system and has several advantages over other suggested schemes. These include implementation easiness, small execution time overhead, fine-grained controls, and safe and correct query modification. The experimental results clearly demonstrate the efficiency of the approach.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.235-241
• /
• 2016

Among recent issues emerging in the areas related to the society, health has received the most attention. In this paper, for a patient unable to do self-care because of worsened diseases, a biological information transfer method is proposed by which the disease information can be securely managed, by attaching an implantable device into the body. Our method object of the invention is to prevent a third party from illegally intercepting and interfering with the biological information attached to the insertion device in the body. In the proposed technique to improve the safety of the patient between the hospital and physician by assigning each code to the biometric information of the patient in order to prevent a third party tapping and interfering. In addition, our method is assigned a code necessary for encoding in advance to confirm the biological information between the patient and the hospital (doctor) in a manner dividing the bio-information code. In particular, the proposed technique makes a third party unable to illegally tap or interfere in, by previously generating a code used for encoding so that it can be stored in the database of the hospital, which not only decreased hospital care time to 6.9%, but also increased work efficiency rate up to 12.7%.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.339-348
• /
• 2017

One of the major issues of statistical process control for variables data is monitoring both the mean and the standard deviation. The traditional approach to monitor these parameters is to simultaneously use two seperate control charts. However there have been some works on developing a single chart using a single plotting statistic for joint monitoring, and it is claimed that they are simpler and may be more appealing than the traditonal one from a practical point of view. When using these control charts for variables data, estimating in-control parameters and checking the normality assumption are the very important step. Nonparametric Shewhart-Lepage chart, proposed by Mukherjee and Chakraborti (2012), is an attractive option, because this chart uses only a single control statistic, and does not require the in-control parameters and the underlying continuous distribution. In this paper, we introduce the Shewhart-Lepage chart, and propose the design procedure to find the optimal diagnosis limits when the location and the scale parameters change simultaneously. We also compare the efficiency of the proposed method with that of Mukherjee and Chakraborti (2012).

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.239-244
• /
• 2018

The effect of the trap equipped with diverse light-emitting lamp on the lure efficiency of whitefly (Trialeurodes vaporariorum) was investigated in the greenhouse cultivating tomato. The light-emitting lamp type equipped to trap was blue, yellow, and white light-emitting lamp. The experiment results showed that trap equipped with blue light-emitting lamp captured the most number of $110{\pm}3.2$ adult whitefly and the number of captured adult whitefly was $71{\pm}1.4$ at yellow light-emitting lamp trap and $45{\pm}1$ at white light-emitting lamp trap respectively. The wavelength distribution band of blue light-emitting lamp was between 330 nm and 430 nm. The wavelength band of yellow and white light-emitting lamp contain repellent wavelength band at the same time. These results show that the trap equipped with blue light-emitting lamp could be used effectively for whitefly control and prevention in the greenhouse cultivating tomato.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.465-472
• /
• 2017

In the past, researchers mainly used the supervised learning technique of machine learning to analyze power data and investigated the identification of patterns through the data mining technique. Data analysis research, however, faces its limitations with the old data classification and analysis techniques today when the size of electric power data has increased with the possible real-time provision of data. This study thus set out to propose a clustering architecture to analyze large-sized electric power data. The clustering process proposed in the study supplements the K-means algorithm, an unsupervised learning technique, for its problems and is capable of automating the entire process from the collection of electric power data to their analysis. In the present study, power data were categorized and analyzed in total three levels, which include the row data level, clustering level, and user interface level. In addition, the investigator identified K, the ideal number of clusters, based on principal component analysis and normal distribution and proposed an altered K-means algorithm to reduce data that would be categorized as ideal points in order to increase the efficiency of clustering.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.319-326
• /
• 2018

The safety interval to prevent collision between trains in a train control system is based on the braking distance according to the emergency braking of the train. The evaluation of the braking performance is based on the longitudinal train dynamics or the commissioning test in the test track, but since the conditions such as the weakening of the adhesion coefficient between the wheel and rail can not all be considered, these conventional methods are not sufficient to design of the train control systems. Therefore, in this study, the Monte Carlo Method (MCM) which can consider various environments is used to analyze braking performance and limitations. The braking model is based on the air braking used in the emergency braking and is modeled to take into account the braking pressure, efficiency, friction coefficient, adhesion condition, and vehicle mass distribution. It is confirmed that braking performance can be improved by controlling the quality of braking device. In addition, the change of the braking performance was confirmed according to the vehicle constituting the train. The results of this study are expected to be used as basic information for designing safety clearance for the train control systems and as a basis for improving the braking performance of railway vehicles.