• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.181-191
• /
• 2007

This study attempted to analyze the characteristics of interior design of the apartment units of Model-houses in terms of ecological aspects. 9 companies that possessed their model houses among the construction companies in Busan area as of August 2006 were selected. 20 units in the model houses of these companies were visited and analyzed. Through literature review, the guideline for the environmentally-friendly residential design was designed and developed to the checklists. The data collected were analyzed to find out the ecological characteristics of the interior space of apartment units. The findings are the followings. First, energy efficiency was properly considered in terms of natural lighting and natural ventilation. Second, in sustainability, the materials for floors and walls could not be reused even though they were environmentally-friendly. Water system needs more improvement for sustainable development including grey-water and rain recycling system. Third, interior greening should be applied more for better environment both physically and emotionally. It is expected that future housing will be more high-risen and densely-populated apartment spaces. Therefore, an approach to new ecological aspects including an emphasis on interior greening, use of eco-materials and adhesives, water recycling and flexibility of the spatial configuration should be made for the next generation.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.57-62
• /
• 2001

The effect of micro scale turbulence on flame structure and stability were experimentally investigated by changing the area of micro turbulence generator(MTG) and air velocity in terms of low NOx and high efficiency combustion. NOx and CO concentration were also measured for different MTG areas to investigate whether a vane swirler having MTG has a possibility of using as part for low NOx combustor. From the obtained results, it is shown that flame stability region increases and flame size becomes small as MTG area increases since MTG in itself makes small scale recirculation flow and swirler does large scale recirculation one. It is also shown that low NOx concentration(about 20${\sim}$30ppm@$O_2$ 11%) is achieved for all MTG areas without any increase in CO concentration regardless of air velocity range tested in this study when the equivalence ratio is 0.7. The results obtained in this study can give basic guideline for the design of compact low NOx high efficiency combustor using a vane swirler having MTG.

• Journal of Korean Academy of Nursing
• /
• v.34 no.3
• /
• pp.449-457
• /
• 2004

Purpose: The aim of this study was to analyze economical efficiency of home care service by comparing a cost-utility ratio(CUR) between home care and hospitalization. Method: The analytic framework of this study was constructed in 5 stages: Identifying the analytic perspectives, measurement of costs, measurement of utility, analysis of CUR, and sensitivity test. Data was collected by reviewing medical records, home care service records, medical fee claims, and other related research. Result: The mean of the annual total cost was 23,317,636 Won in home care and 73,739,352 Won in hospital care. QALY was 0.389 in home care and 0.474 in hospital care, so CUR was 299,712,545 QALY in home care and 777,841,266 QALY in hospital care. Conclusion: The findings affirmed that home care had an economical efficiency in the aspect of utility compared to hospitalization. Therefore, the findings of this study can be used to develop a governmental health policy or to expand the home care system. In addition, the cost-utility analysis framework and process of this study will be an example model for cost-utility analysis in nursing research. Therefore, it will be used as a guideline for future research related to cost-utility analysis in nursing.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.865-884
• /
• 2016

We have previously demonstrated a microfluidic elastomer, which changes apparent color and could have potential applications in smart windows. The practical use of such functional microfluidic systems requires rapid and uniform fluid displacement throughout the channel network with minimal amount of liquid supply. The goal of this simulation study is to design various microfluidic networks for similar applications including, but not limited to, the color-switching windows and compare the liquid displacement speed and efficiency of the designs. We numerically simulate and analyze the liquid displacement in the microfluidic networks with serpentine, parallel and lattice channel configurations, as well as their modified versions with wide or tapered distributor and collector channels. The data are analyzed on the basis of numerical criteria defined to evaluate the performance of the corresponding functional systems. We found that the lattice channel network geometry with the tapered distributors and collectors provides most rapid and uniform fluid displacement with minimum liquid waste. The simulation results could give an important guideline for efficient liquid supply/displacement in emerging functional systems with embedded microfluidic networks.

• Journal of Environmental Science International
• /
• v.14 no.7
• /
• pp.683-689
• /
• 2005

The consecutive combination process of a biological process as the pre-treatment and a chemical process as the post-treatment is applied for the dyeing wastewater. The poor efficiency of biological treatment using pure oxygen makes the chemical treatment cost high. It is necessary to improve the efficiency of biological treatment in order to reduce the cost of chemical treatment. The purpose of this paper is to find the minimum dose of chemical reagent to fit the Discharged Water Quality Standards for the different biological treatment effluents. Results revealed that the minimum dosage of Fenton's reagent lead to save the cost of chemical treatment based on the guideline dose in the treatment plant. The possible maximum saving reagents was up to $70\%$ for the effluent of the pilot plant packed with the carrier imbedded microorganisms which were selected from the present treatment plant.

• Membrane and Water Treatment
• /
• v.7 no.1
• /
• pp.11-22
• /
• 2016

The characterization of treatment performance with respect to mixed liquor suspended solids (MLSS) concentration enables greater control over system performance and contaminant removal efficiency. Hybrid membrane bioreactors (HMBRs) have yet to be well characterized in this regard, particularly in the context of greywater treatment. The aim of this study, therefore, was to determine the optimal MLSS concentration for a decentralized HMBR greywater reclamation system under typical loading conditions. Treatment performance was measured at MLSS concentrations ranging from 1000 to 4000 mg/L. The treated effluent was characterized in terms of biochemical oxygen demand ($BOD_5$), chemical oxygen demand (COD), turbidity, ammonia ($NH_3$), total phosphorus (TP), total kjeldahl nitrogen (TKN), and total nitrogen (TN). An MLSS concentration ranging from 3000 to 4000 mg/L yielded optimal results, with $BOD_5$, COD, turbidity, $NH_3$, TP, TKN, and TN removals reaching 99.2%, 97.8%, 99.8%, 99.9%, 97.9%, 95.1%, and 44.8%, respectively. The corresponding food-to-microorganism ratio during these trials was approximately 0.23 to 0.28. Operation at an MLSS concentration of 1000 mg/L resulted in an irrecoverable loss of floc, and contaminant residuals exceeded typical guideline values for reuse in non-potable water applications. Therefore, it is suggested that operation at or below this threshold be avoided.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2731-2738
• /
• 2015

The importance of disaster observation facilities and system are increasing around the world in order to predict and prevent water disasters, which cause serious damage to life and property. A performance test center was built to stabilize performance, compatibility, and reliability of devices, and to verify new S/W. The aim of this study is to make a guideline to build standard verifying system for hydrological observation devices by building the performance test center. In addition, efficiency of management and operation of hydrological devices can be enhanced through device analysis, maintenance, database building, and grade certificate publishment after the device test.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.778-784
• /
• 2012

In comparison with some other light sources, LED has merits such as increased life expectancy, fast response, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED has widely used in many industrial fields such as automotive, aviation, display, transportation and special lighting applications. Since the high heat generation of LED chips can cause a reduction in lifetime, degradation of luminous efficiency, and variation of color temperature, studies have been carried out on the optimization of LED packaging and heat sinks. In this study, experiments on measuring the heat generation rate of LED and the cooling performance of a heat sink were carried for analyzing the thermal characteristics of LED lighting system in free convection. From the results, dimensionless correlation on the cooling performance of heat sink in natural convection was proposed with Nusselt number and Rayleigh number as a guideline for designing cooling device of LED lightings.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.4
• /
• pp.29-39
• /
• 2021

Purpose: As the need for a hospital specializing in infectious diseases has increased, construction is being promoted. Hospitals specializing in infectious diseases receive some state subsidies, but in the case of private hospitals, hospital operation efficiency should be considered to prevent cost loss. Therefore, we aim to derive a building plan for a general ward in a hospital specializing in infectious diseases that can be used not only in normal times but also in times of crisis. Methods: In this study, relevant literature review and field interviews were conducted with medical staff working in facilities designated as infectious disease hospitals. Results: The general ward building plan of the hospital specializing in infectious diseases was classified into three categories and presented. 'Spatial composition' for nursing unit and ward zoning, 'Spatial plan' for ward space conversion in normal times and crises, 'Bedroom plan' for effective dimensions and area of the ward. Implications: It can be used as a guideline when designing an infection-facility ward. And it can be a basis for inducing improvements to prevent infection in the ward of existing medical facilities.

• Journal of Urban Science
• /
• v.11 no.1
• /
• pp.37-47
• /
• 2022

Even if Korea has established various legal guidelines as well as plans for the purpose of systematic management of urban citycapes, various problems have been pointed out, such as a decrease in operational efficiency because the legal framework is not clearly defined and the guidelines do not fully reflect regional characteristics. In the midst of this, Singapore is being mentioned as a representative example of enhancing international competitiveness by forming an outstanding urban cityscape through successful urban planning and operating system. Therefore, this study aims to suggest a direction for the improvement of Korea's urban planning and design guidelines by investigating and analyzing the characteristics of Singapore's urban planning system and design guidelines. As a result of the research and analysis, it was concluded that Singapore's urban planning system was based on the unified planning and management system. In particular, the Singapore Urban Design Guidelines provide differentiated guidelines to maintain and strengthen regional characteristics based on linkage with higher-level plans as detailed practical guidelines, and were operated as flexible guidelines reflecting the changes of the times and the needs of members of society. It also provides a direction for the improvement of the Korean urban design system, such as to increase the executionablity of the plan and the efficiency of operation by utilizing various guidance and support policies, rational and simplified deliberation procedures, and allow a platform that enhances the accessibility and convenience of related information.