Browse > Article
http://dx.doi.org/10.12989/sss.2016.18.5.865

Role of network geometry on fluid displacement in microfluidic color-changing windows  

Ucar, Ahmet Burak (Department of Chemical and Biomolecular Engineering, North Carolina State University)
Velev, Orlin D. (Department of Chemical and Biomolecular Engineering, North Carolina State University)
Koo, Hyung-Jun (Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology)
Publication Information
Smart Structures and Systems / v.18, no.5, 2016 , pp. 865-884 More about this Journal
Abstract
We have previously demonstrated a microfluidic elastomer, which changes apparent color and could have potential applications in smart windows. The practical use of such functional microfluidic systems requires rapid and uniform fluid displacement throughout the channel network with minimal amount of liquid supply. The goal of this simulation study is to design various microfluidic networks for similar applications including, but not limited to, the color-switching windows and compare the liquid displacement speed and efficiency of the designs. We numerically simulate and analyze the liquid displacement in the microfluidic networks with serpentine, parallel and lattice channel configurations, as well as their modified versions with wide or tapered distributor and collector channels. The data are analyzed on the basis of numerical criteria defined to evaluate the performance of the corresponding functional systems. We found that the lattice channel network geometry with the tapered distributors and collectors provides most rapid and uniform fluid displacement with minimum liquid waste. The simulation results could give an important guideline for efficient liquid supply/displacement in emerging functional systems with embedded microfluidic networks.
Keywords
COMSOL simulation; microfluidic network; flow uniformity; liquid displacement efficiency; color-changing smart windows;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Bejan, A. and Lorente, S. (2006), "Constructal theory of generation of configuration in nature and engineering", J. Appl. Phys., 100, 041301 1-27.   DOI
2 Chang, S.T., Ucar, A.B., Swindlehurst, G.R., Bradley IV, R.O., Renk, F.J. and Velev, O.D. (2009), "Materials of controlled shape and stiffness with photocurable microfluidic endoskeleton", Adv. Mater., 21, 2803-2807.   DOI
3 Cho, K.H. and Kim, M.H. (2010), "Fluid flow characteristics of vascularized channel networks", Chem. Eng. Sci., 65, 6270-6281.   DOI
4 Commenge, J.M., Saber, M. and Falk, L. (2011), "Methodology for multi-scale design of isothermal laminar flow networks", Chem. Eng. J., 173, 541-551.   DOI
5 Domachuk, P., Tsioris, K., Omenetto, F.G. and Kaplan, D.L. (2010), "Bio-microfluidics: biomaterials and biomimetic designs", Adv. Mater., 22, 249-260.   DOI
6 Gunther, A. and Jensen, K.F. (2006), "Multiphase microfluidics: from flow characteristics to chemical and materials synthesis", Lab Chip, 6, 1487-1503.   DOI
7 Koo, H.J. and Velev, O.D. (2013b), "Regenerable photovoltaic devices with a hydrogel-embedded microvascular network", Sci. Rep., 3, 2357 (1-6).   DOI
8 Hager, M.D., Greil, P., Leyens, C., van der Zwaag, S. and Schubert, U.S. (2010), "Self-healing materials", Adv. Mater., 22, 5424-5430.   DOI
9 Hatton, B.D., Wheeldon, I., Hancock, M.J., Kolle, M., Aizenberg, J. and Ingber, D.E. (2013), "An artificial vasculature for adaptive thermal control of windows", Sol. Energ. Mat. Sol. C, 117, 429-436.   DOI
10 Koo, H.J. and Velev, O.D. (2013a), "Ionic current devices-Recent progress in the merging of electronic, microfluidic, and biomimetic structures", Biomicrofluidics, 7, 031501 1-10.   DOI
11 Lee, J., Lorente, S., Bejan, A. and Kim, M. (2009), "Vascular structures with flow uniformity and small resistance", Int. J. Heat Mass Tran., 52, 1761-1768.   DOI
12 Liu, H., Li, P.W. and Van Lew, J. (2010), "CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels", Int. J. Hydrogen Energ., 35, 9186-9198.   DOI
13 Mark, D., Haeberle, S., Roth, G., von Stetten, F. and Zengerle, R. (2010), "Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications", Chem. Soc. Rev., 39, 1153-1182.   DOI
14 Russ, J.C. (2011), The Image Processing Handbook, sixth ed. Taylor & Francis Group., Boca Raton, FL, pp. 92-97.
15 Morin, S.A., Shepherd, R.F., Kwok, S.W., Stokes, A.A., Nemiroski, A. and Whitesides, G.M. (2012), "Camouflage and display for soft machines", Science, 337, 828-832.   DOI
16 Murphy, E.B. and Wudl, F. (2010), "The world of smart healable materials", Prog. Polym. Sci., 35, 223-251.   DOI
17 Olugebefola, S.C., Aragon, A.M., Hansen, C.J., Hamilton, A.R., Kozola, B.D., Wu, W., Geubelle, P.H., Lewis, J.A., Sottos, N.R. and White, S.R. (2010), "Polymer microvascular network composites", J. Compos. Mater., 44, 2587-2603.   DOI
18 Reis, A.H. (2006), "Constructal theory: from engineering to physics, and how flow systems develop shape and structure", Appl. Mech. Rev., 59, 269-282.   DOI
19 Renault, C., Colin, S., Orieux, S., Cognet, P. and Tzedakis, T. (2012), "Optimal design of multi-channel microreactor for uniform residence time distribution", Microsyst. Technol., 18, 209-223.   DOI
20 Saias, L., Autebert, J., Malaquin, L. and Viovy, J.L. (2011), "Design, modeling and characterization of microfluidic architectures for high flow rate, small footprint microfluidic systems", Lab Chip, 11, 822-832.   DOI
21 So, J.H., Thelen, J., Qusba, A., Hayes, G.J., Lazzi, G. and Dickey, M.D. (2009), "Reversibly deformable and mechanically tunable fluidic antennas", Adv. Funct. Mater., 19, 3632-3637.   DOI
22 Solovitz, S.A. and Mainka, J. (2011), "Manifold design for micro-channel cooling with uniform flow distribution", J. Fluid Eng - T. ASME, 133, 0511103 1-11.
23 Stone, H.A., Stroock, A.D. and Ajdari, A. (2004), "Engineering flows in small devices: microfluidics toward a lab-on-a-chip", Annu. Rev. Fluid Mech., 36, 381-411.   DOI
24 Wang, H., Iovenitti, P., Harvey, E. and Masood, S. (2002), "Optimizing layout of obstacles for enhanced mixing in microchannels", Smart Mater. Struct., 11, 662-667.   DOI
25 Tondeur, D., Fan, Y., Commenge, J.M. and Luo, L. (2011a), "Uniform flows in rectangular lattice networks", Chem. Eng. Sci., 66, 5301-5312.   DOI
26 Tondeur, D., Fan, Y. and Luo, L.G. (2011b), "Flow distribution and pressure drop in 2D meshed channel circuits", Chem. Eng. Sci., 66, 15-26.   DOI
27 Tondeur, D., Fan, Y., Commenge, J.M. and Luo, L. (2011c), "Flow and pressure distribution in linear discrete "ladder-type" fluidic circuits: an analytical approach", Chem. Eng. Sci., 66, 2568-2586.   DOI
28 Toohey, K.S., Sottos, N.R., Lewis, J.A., Moore, J.S. and White, S.R. (2007), "Self-healing materials with microvascular networks", Nat. Mater., 6, 581-585.   DOI
29 Ucar, A.B. and Velev, O.D. (2012), "Microfluidic elastomer composites with switchable vis-IR transmittance", Soft Matter, 8, 11232-11235.   DOI
30 Wang, J. (2011), "Theory of flow distribution in manifolds", Chem. Eng. J., 168, 1331-1345.   DOI
31 Wang, K.M., Lorente, S. and Bejan, A. (2007), "Vascularization with grids of channels: multiple scales, loops and body shapes", J. Phys. D: Appl. Phys., 40, 4740-4749.   DOI
32 Wu, W., Hansen, C.J., Aragon, A.M., Geubelle, P.H., White, S.R. and Lewis, J.A. (2009), "Direct-write assembly of biomimetic microvascular networks for efficient fluid transport", Soft Matter, 6, 739-742.