• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.276-276
• /
• 2010

Localized surface plasmon resonance (LSPR) has been explored recently as a promising approach to increase energy conversion efficiency in photovoltaic devices, particularly for thin film hydrogenated amorphous silicon (a-Si:H) solar cells. The LSPR is frequently excited via an electromagnetic (EM) radiation in proximate metallic nanostructures and its primary con sequences are selective photon extinction and local EM enhancement which gives rise to improved photogeneration of electron-hole (e-h) pairs, and consequently increases photocurrent. In this work, high-dielectric-constant (k) $ZrO_2$ (refractive index n=2.22, dielectric constant $\varepsilon=4.93$ at the wavelength of 550 nm) is proposed as spacing layer to enhance the LSPR for application to the thin film silicon solar cells. Compared to excitation of the LSPR using $SiO_2$ (n=1.46, $\varepsilon=2.13$ at the wavelength of 546.1 nm) spacing layer with Au nanoparticles of the radius of 45nm, that using $ZrO_2$ dielectric shows the advantages of(i) ~2.5 times greater polarizability, (ii) ~3.5 times larger scattering cross-section and ~1.5 times larger absorption cross-section, (iii) 4.5% higher transmission coefficient of the same thickness and (iv) 7.8% greater transmitted electric filed intensity at the same depth. All those results are calculated by Mie theory and Fresnel equations, and simulated by finite-difference time-domain (FDTD) calculations with proper boundary conditions. Red-shifting of the LSPR wavelength using high-k $ZrO_2$ dielectric is also observed according to location of the peak and this is consistent with the other's report. Finally, our experimental results show that variation of short-circuit current density ($J_{sc}$) of the LSPR enhanced a-Si:H solar cell by using the $ZrO_2$ spacing layer is 45.4% higher than that using the $SiO_2$ spacing layer, supporting our calculation and theory.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.160-170
• /
• 2010

Steel Fiber Reinforced Concrete (SFRC) beams has greater shear strength than typical reinforced concrete beams due to the high tensile strength of steel fibers. In this research, an experiment has been conducted to investigate the shear behavior of SFRC beams, and especially, the portion of shear resistance by uncracked compressive concrete section has been measured. Based on the test results in this study and 87 test data collected from literature, the accuracy of the existing equations for the estimation of shear strength has been evaluated. The shear strength of SFRC beams increased as more steel fibers were mixed. However, it is considered that the most efficient amount of steel fiber for enhancement of shear strength would be between 1% and 2% in that the specimen with 0.5% of steel fibers were abruptly failed after inclined cracking, and that the specimen with 2.0% of steel fibers showed a relatively low efficiency in increasing shear strength. The portion of shear resistance by the uncracked compressive concrete section was measured to be greater than 21%, and the equation proposed by Oh et al. provided the best accuracy on the estimation of shear strength of SFRC beams among the approaches evaluated in this study.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.359-364
• /
• 2011

The study uses department of the sensitivity and fuzzy reasoning, one of artificial intelligence algorithms, so that develop LED lighting system based on fuzzy reasoning for systematical control of the LED color temperature. In the area of sensitivity engineering, by considering the relation between color and emotion expressed as an adjective word, the corresponding sensitivity word can be determined, By taking into consideration the relation between the brain wave measured from the human brain and the color temperature, the preferred lesson subject can be determined. From the decision of the sensitivity word and the lesson subject, we adjust the color temperature of RGB (Red, Green, Blue) LED. In addition, by using the information of the latitude and the longitude from GPS(Global Positioning System), we can calculate the on-line moving altitude of sun. By using the sensor information of both temperature and humidity, we can calculate the discomfort index. By considering the altitude of sun as well as the value of the discomfort index, the illumination of W(white) LED and the color temperature of RGB LED can be determined. The (LED) sensitivity lighting control system is bulit up by considering the sensitivity word, the lesson subject, the altitude of sun, and the discomfort index The developed sensitivity lighting control system leads to more suitable atmosphere and also the enhancement of the efficiency of lesson subjects as well as business affairs.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.55-63
• /
• 2020

Earthwork automation has emerged as a promising technology in the construction industry, and the application of earthwork automation technology is starting from the acquisition and processing of point cloud data of the site. Point cloud data has more than a million data due to vast extent of the construction site, and the processing time of the original point cloud data is critical because it takes tens or hundreds of hours to generate a Digital Terrain Model (DTM), and enhancement of the processing time can largely impact on the efficiency of the modeling. Currently, a benchmark program (BP) is actively used for the purpose of both point cloud data processing and BIM design as an integrated program in Korea, however, there are some aspects to be modified and refined. This study modified the BP, and developed an updated program by adopting a compile-based development environment, newly designed UI/UX, and OpenGL while maintaining existing PCD processing functions, and expended compatibility of the PCD file formats. We conducted a comparative test in terms of loading speed with different number of point cloud data, and the results showed that 92 to 99% performance increase was found in the developed program. This program can be used as a foundation for the development of a program that reduces the gap between design and construction by integrating PCD and earthwork BIM functions in the future.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.119-130
• /
• 1999

As Japanese economy has been well developed, the manpower problem of farmland has also become one of the largest and the most crucial issues in the overall agricultural policy of the Japanese Government. Particularly, the energetic younger generation and a core of agricultural labor force, has drastically decreased, while the weak older generation has increased. The severity of manpower shortage in agricultural sector led to create a farmer training programs which had been vigorously begun by the Yamagata Prefecture, and a center for promoting local autonomy. The major purpose of education for enhancement of status of future farmers as well as the welfare of core farmhousehold is to provide them with technical of vocational education to give training to those who want to become agricultural technicians, rural leaders of practical farmers Educational program for future and young farmers put emphasis on practical trainings which are directly applied to proper farm management. As a supporting policy for promoting future farmers' activities, Prefecture-level supports were strengthened to develop technical capability, managerial and supervisory ability, and the ability to lead organized activity so that the farm youth may operate modern farms with higher efficiency and greater specialization. Political consideration was also made to develop a rich sense of farm management as well as the adaptability necessary to introduce technical and managerial innovations. Methological measurements on how the Korean government has to do for solving the problem of agricultural manpower facing in farmland in Korea were noted.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1118-1123
• /
• 2011

The changes of available silicate (Avail. $SiO_2$) contents in paddy soils (sandy loam) were assessed from data of the 41 years fertilization plots in which the continuous rice cropping experiment started in 1954 at the National Academy of Agricultural Science. The treatments were no fertilization (O), inorganic fertilization (NPK), inorganic fertilizer plus rice straw compost (NPK+C), inorganic fertilizer plus silicate fertilizer as a soil amendment (NPK+S), inorganic fertilizer plus rice straw compost and silicate fertilizer (NPK+CS) and inorganic fertilizer plus rice straw compost, silicate fertilizer and lime (NPK+CSL). Available silicate contents in NPK+S, NPK+CS and NPK in surface soil reached at the highest content ($255{\sim}330mg\;kg^{-1}$) after 41 years and then levelled off. Available silicate contents in subsurface soil (25~30 cm) were higher in NPK+C and NPK+S treatments than those in other treatments. Continuous application of silicate fertilizer affected significantly on the levels of available silicate in surface and subsurface soils. Silicate uptake of top rice was more increased by 98% in NPK+CS and NPK+CSL over NPK. Grain yield also increased by 37~47% in NPK+CS and NPK+CSL as compared to NPK. The combined applications of inorganic fertilizers with silicate as a soil amendment are recommended as the best fertilization practice for fertilizer use efficiency, enhancement of soil fertility status in the continuous rice cropping system in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.479-488
• /
• 2019

The flight test operational procedure artifact includes mission planning, execution methods, and safety measures for each step of test progress. As the development of guided missiles has become more advanced and strategic, flight test has become increasingly complex and broadened. Therefore, increased reliability of the flight test operation procedures was required to ensure test safety. Particularly, the design of the flight test operational procedures required verification through M&S to predict and prepare for the uncertainty in a new test. The relevant studies have published the optimal framework development for flight tests and the model-based improvements of flight test processes, but they lacked the specificity to be applied directly to the flight test operational procedures. In addition, the flight test operational procedures, which consist of document bases, have caused problems such as limitations of analysis capabilities, insensitive expressions, and lack of scalability for the behavior and performance analysis of test resources. To improve these problems, this paper proposes how to design operational procedure of guided missile flight test system by applying MBSE(Model-based Systems Engineering). This research has improved reliability by increasing the ability to analyze the behavior and performance of test resources, and increased efficiency with the scalability applicable to multiple flight tests. That can be also used continuously for the guided missile flight tests that will be developed in the future.

• Korean Journal of Microbiology
• /
• v.54 no.4
• /
• pp.420-427
• /
• 2018

The orthogonal pair of Saccharomyces cerevisiae tyrosyl-tRNA synthetase (Sc YRS) and a variant of E. coli initiator tRNA, fMam $tRNA_{CUA}$ which recognizes the amber stop codon is an effective tool for site-specific incorporation of unnatural amino acids into the protein in E. coli. To evolve the amber suppression activity of the orthogonal pair, we generated a mutant library of Sc YRS by randomizing two amino acids at 320 and 321 which involve recognition of the first base of anticodon in fMam $tRNA_{CUA}$. Two positive clones are selected from the library screening with chloramphenicol resistance mediated by amber suppression. They showed growth resistance against high concentration of chloramphenicol and their $IC_{50}$ values were approximately 1.7~2.3 fold higher than the wild type YRS. In vivo amber suppression assay reveals that mutant YRS-3 (mYRS-3) clone containing amino acid substitutions of P320A and D321A showed 6.5-fold higher activity of amber suppression compared with the wild type. In addition, in vitro aminoacylation kinetics of mYRS-3 also showed approximately 7-fold higher activity than the wild type, and the enhancement was mainly due to the increase of tRNA binding affinity. These results demonstrate that optimization of anticodon recognition by engineered aminoacyl tRNA synthetase improves the efficiency of unnatural amino acid incorporation in response to nonsense codon.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.270-277
• /
• 2019

Commercial direct refrigerators have good energy efficiency, but are difficult to use for supercooled storage due to their large temperature deviation. Placing insulators and conductors inside the refrigerator could reduce these temperature deviations to within 0.3 degrees, allowing for the supercooled storage. The supercooled storage of salted Chinese cabbages during ten weeks was progressed to compare the other low temperature storages. The nucleation temperatures of salted Chinese cabbage were around -2.5℃ and the freezing points were around -0.4℃, so -2℃ was selected for the supercooled storage. The growth rate of lactic acid bacteria and yeast at -2℃ storage was lower than that at 2℃ storage. The reducing sugar was maintained higher due to the growth rate of lactic acid bacteria. The supercooled storage had an effect of delaying the fermentation of the salted Chinese cabbage, which may have the effect of delaying the fermentation of kimchi. This enhancement method of the direct refrigerator was effective for the supercooled storage and would be promising for commercial use.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.49-56
• /
• 2021

In this study, a liquid crystal emulsion with a composition ratio similar to the skin lipid composition was manufactured using ceramide, glycolipids, cholesterol, and fatty acids, and a polarized microscope was used to identify liquid crystal particles in the formulation, and a cryso-SEM was used to confirm the formation of a multilayer structure. The above samples were stored at room temperature for one month and the liquid crystal structure was continuously maintained through microscopic observation. In addition, a cream composition containing liquid crystal emulsion was manufactured, and the efficiency of ceramide skin penetration was confirmed using three-dimensional artificial skin. Clinical trials were conducted using the cream composition and the results of clinical trials on skin barrier improvement were confirmed by measuring skin moisture retention (skin hydration) and transepidermal water loss (T EWL) of subjects compared to general emulsion.