• Membrane Journal
• /
• v.22 no.4
• /
• pp.243-250
• /
• 2012

The effect of water back-flushing period (filtration time, FT) was investigated in hybrid process of alumina microfiltration and photocatalyst for advanced drinking water treatment in this study, and compared with the previous studies with carbon microfiltration or alumina ultrafiltration membranes. The FT was changed in the range of 2~10 min with fixed 10 sec of BT. Then, the FT effects on resistance of membrane fouling ($R_f$), permeate flux (J) and total permeate volume ($V_T$) were observed during total filtration time of 180 min. As decreasing FT, $R_f$ decreased and J increased as decreasing FT, which was same with the previous results with carbon microfiltration or alumina ultrafiltration membranes. The treatment efficiency of turbidity was high beyond 98.1%, and the effect of FT was not shown on treatment efficiency of turbidity, which was same with the previous result of carbon microfiltration. The treatment efficiency of organic matters was the highest value of 89.6 % at FT 8 min, which was a little higher than those of the previous results, and the effect of FT was not shown on treatment efficiency of organic matters.

• Korean journal of food and cookery science
• /
• v.29 no.4
• /
• pp.425-437
• /
• 2013

This study conducted a questionnaire survey of the current use status of central kitchen products on 198 dietitians and cooks working at a catering center of a company affiliated with group S in order to investigate the use state of the central kitchen products in catering. The largest groups of respondents answered that they use the central kitchen products once two to four days. As a reason to use it, the largest group answered that they used it because of the ease of preparation. In addition, the results show that the subjects often use sauce and processed vegetables among the central kitchen products. This study investigated the efficiency of cooking, hygiene and safety management of the central kitchen products. The results show that they have a large effect on shortening the cooking time. The quality control and service efficiency of the central kitchen products showed a positive reaction to the menu diversification and excellent quality but a negative reaction to the nutritious superiority. The operating cost efficiency of the central kitchen products generally showed a negative reaction except for the reducing effect of waste rate. As an improvement of the central kitchen products, the survey shows that the reduction in price and quality progress should be most urgently improved. Based on these results, the introduction of the central kitchen products into to the catering enables to standardize mass production, improve the taste and quality, cook without professional chefs and produce productivity increasing effect in the catering by the time shortening effect.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.99-117
• /
• 2009

Energy is essential factor of production for a firm to produce goods and services. If so, what is the condition of maintaining profit of a firm when energy price is going up? In conclusion, the condition is that the rate of productivity improvement should be greater than the rate of energy price increase. To put this concretely, when the elasticity of energy price as to the productivity improvement is greater than the weight of the energy cost on to the total revenue of the firm, the firm can escape the negative effect of energy price increase. This is that, saying that once more, the firm have to reduce the energy cost or promote energy efficiency to maintain appropriate or sufficient profit when energy price is going up fast. Therefore, in this study we will analyze the effect of the oil price increase on the energy saving investment and that of energy saving investment on the energy efficiency in the field of Korean manufacturing industry. In doing so, this study could show that the effect of energy price increase on the energy efficiency of the firm and the factor of that mechanism.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.24-31
• /
• 2004

This study was initiated to evaluate the efficiencies of DEPHANOX and Modified-DEPHANOX, which were devoloped to enhance nitrogen removal efficiency in municipal wastewater treatment. In the results, removal efficiency of organic matters was not affected much by increased loading rate of organic matters which is contained in influent. The nitrogen removal efficiencies according to the loading rate of influent TN was decreased drastically in conditions of over $0.2kg/m^3{\cdot}day$, which is T-N loading rate, and the DEPHANOX process was affected more sensitively than the M-DEPHANOX was. When the temperature was altered from $25^{\circ}C$ to $16^{\circ}C$ at HRT 6hrs, the removal efficiency of ammonia nitrogen was still over 90% and it was concluded that both DEPHANOX and M-DEPHANOX were strong enough to endure temperature variation. Moreover, both processes showed over 90% in ammonia removal efficiencies in over HRT 5hrs, so it was concluded that they were strong in HRT variation. M-DEPHANOX process showed a higher value than DEPHANOX did in T-N removal efficiency to the extent of 4~21 %, which resulted from differency of denitrification rates and the biosorption efficiency of organic matter in both processes. In the condition of HRT less than 4hrs, concentrations of ammonia nitrogen contained in effluents and nitrification reactors, might be sensitively affected by biosorption efficiency of organic matters in first separation tank. In the effect of effluent nitrate concentration in phosphorus removal, the more effluent nitrate concentration was decreased, the more phosphorus removal efficiency was increased. This result is related to the decrease of concentration of effluent nitrate which resulted from nitrification inhibition by decreased HRT.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.246-251
• /
• 2014

Recent studies have shown methods of improving solar cell efficiency. Especially on single crystalline silicon wafer which is high-efficiency solar cell material that has been widely studied. Interstitial oxygen (Oi) is the main impurity in the Czochralski (Cz) growing method, and excess of this can form precipitates during cell fabrication. We have demonstrated the effect of Oi impurity and oxygen precipitation concentration of the wafer on Cz-silicon solar cell efficiency. The result showed a decrease in cell efficiency as Oi and oxygen precipitation increase. Moreover, we have found that the critical point of [Oi] to bring higher cell efficiency is at 14.5 ppma in non-existent Bulk Micro Defect (BMD).

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.139-149
• /
• 2010

This paper analyses the relative efficiency of 13 container terminals based on the data for the period 2003-8 to offer a fresh perspective. There has been abundant empirical research undertaken on the technical efficiency of Busan and Gwangyang port. Most studies have focused on the use of parametric and non-parametric techniques to analyse overall technical efficiency. Here, the framework assumes that terminals use two input to produce one output; the former includes container yard and container crane and the latter container volume. Jarque-Bera indicates that three variables are not normally distributed and the positive skewness shows that all the variables have long right tails. This means there are many small-scaled container terminals. This paper also employs heteroscedastic Tobit model to show the effect of the explanatory variables on the container terminal efficiencies. The Tobit model shows that both container yard and container cranes have positive effect on the container terminal efficiency, but container yard has a higher impact on the efficiency than the container crane.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.486-490
• /
• 2011

To investigate the effect of two-emission-layer structure on the emission characteristics of the phosphorescent white organic light-emitting diodes (PHWOLEDs), the PHWOLEDs with two different emission layers, blue EML(29 nm, FIrpic-doped mCP) and red EML(1 nm, Ir(pq)$_2$acac-doped CBP)), following host-guest system were fabricated. The bi-layered blue EML was composed of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 7, 10, 15, 20, and 25 vol.%, respectively). When the concentration of FIrpic was increased from 7 to 15 vol.%, light emission luminance, current efficiency, and external quantum efficiency were increased. On the contrary, when the concentration of FIrpic was increased to more than 20 vol.%, light emission luminance, current efficiency, and external quantum efficiency were decreased. The PHWOLEDs with the bi-layered blue EML structure of mCP:FIrpic (20 nm, 7 vol.%) and mCP:FIrpic (9 nm, 15 vol.%) showed current efficiency of 29.7 cd/A and external quantum efficiency (EQE) of 16.6% at 1,000 $cd/cm^2$.

• The Journal of Information Systems
• /
• v.5
• /
• pp.307-328
• /
• 1996

Group Decision Support System(GDSS) has been a rapidly emerging field of the 1990's. Whereas conventional Decision Support System(DSS) helps individual decision makers, GDSS are designed to help groups of senior management and professional groups reach consensus. However, empirical researches which required to establish the optimum GDSS specification are scarce. Along with this purpose, this paper was focused to investigate the effect of group decision factors on the efficiency of the group decision. In this paper, task types of group decision which were discussed as major variable at many papers were settled as environmental factor. The result has verified the importance of the role-related factors on the efficiency of the group decision. This fact highlights the need of more researches on the role-related factors in the group decision in the GDSS development.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03a
• /
• pp.51-63
• /
• 2000

Because of simplicity and easiness, dynamic pile driving formulae have long been used by most of the field engineers for pile quality control purposes. Yet their reliability have been repeatedly reported unsuitable and the results can lead to significant errors. According to the research results by the authors, the two most important sources of unreliability of dynamic pile driving formulae are uncertainty in the estimation of hammer efficiency and time dependent characteristics of pile bearing capacity. Based on this finding a new method is proposed. By using the actual value of hammer efficiency the pile bearing capacity at the time of driving could be reasonably estimated. By performing restrike test sometime after pile installation, time effect coefficient could be determined. The effectiveness of the proposed method was proven in the actual construction project.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1605-1608
• /
• 2005

This study was carried out to analyze the effect of machinery house location on the stability of high efficiency gantry crane which can improve the productivity of the container transportation wok by reducing cycle time. The wind load was evaluated according to 'Load Criteria of Building Structures' enacted by the ministry of construction & transportation. The uplift forces of high efficiency gantry crane under this wind load were calculated by analyzing reaction forces at each supporting point. And variation of reaction forces at each supporting point was analyzed according to machinery house location.