• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.73-78
• /
• 2000

This paper describes the effect of span-to-depth ratio, which describes aspect of cell formed with top diaphragm steel plate, on capacity in composite steel-concrete structure of sandwich system. The span-to-depth ratio \ulcorner load-carrying mechanism and load-distribution capacity of structure. Therefore, stress levels of members and load-resis\ulcorner of system vary according to span-depth ratio. In this study, numerical nonlinear analysis was performed to various ratio for two types(MA, MB) composite structure of sandwich system to analyze the influence of span-to-depth ratio or, behavior. The difference of load-carrying mechanism and stress of members results from analysis results, then bas\ulcorner differences, the effects of span-to-depth ratio on shear capacity, flexural capacity and load-resistance capacity were analyze effects on failure mode and ductility were briefly. As a results of this study, as span-to-depth ratio increases, \ulcorner bottom steel plate and concrete lower. This implies an increase in effective flexural and shear capacity. Therefore lo\ulcorner capacity of structure improves as span-to-depth ratio increases, Especially, the effect is greate in shear than flexural span-to-depth ratio increases, this difference between flexural and shear capacity may change failure mode and ductility. span-to-depth ratio increases capacity increases more than flexural capacity, we should expect that structural behavior mode gradually change from shear to flexural and ductility of structure gradually improves.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.37-48
• /
• 2004

본 연구에서는 사질토의 취성적 응력-변형률 관계와 전단시 체적팽창을 고려할 수 있는 구성모델에 대한 연구를 수행하였다. 제안된 모델은 일반등방경화규칙에 의거한 비등방 경화규칙을 적용하였으며, 미소변형에서 대변형에 이르는 전체변형률 영역의 거동을 모델할 수 있도록 적합한 경화함수를 이용하였다. 항복면의 형태는 응력공간에서 원통형으로 나타나는 단순한 형태로 실용적으로 적용하기 편리하도록 하였다. 또한 유동규칙을 단순화하여 소성 체적 변형률을 팽창률을 이용하여 정의하였다. 이로 인하여 사질토에서 나타나는 전단시 팽창을 모델하는 것이 가능하였다. 또한 가상적인 첨두응력비를 정의하여 취성적 응력-변형률 관계를 모델하는 것이 가능하였다. 이 때 제안된 모델의 계수를 체계적으로 결정하기 위하여 실수형 유전자 알고리즘이 적용된 최적화 기법이 적용되었다. 이를 통하여 구성 모델에 필요한 계수를 결정할 수 있었다. 제안된 모델을 검증하기 위하여 풍화토시료에 대한 $K_0$ 압밀 삼축시험을 수행하였다. 이러한 시험결과를 제안된 모델과 비교한 결과 $K_0$ 압밀 시험에서 나타나는 취성적 응력-변형률 관계 및 체적의 팽창과 같은 실제 유효응력 거동을 합리적으로 모델하는 것이 가능하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.656-663
• /
• 2010

본 연구에서는 K.Terzaghi의 유효응력이론을 인용하여 압밀기반의 안전하중 산출 과정과 결과를 제시하였다. 일반적인 강도를 평가하기 위하여 이용된 J.I.Solovyov의 순간강도 이론에 기초를 두어, 제시한 방법은 포화된 연약점토지반에서 도로의 유지보수 뿐 아니라 축조 과정에 안전하중의 계산 적용이 가능하다. 실제로 편리한 표준 압밀 drain test에서 정의된 점착력, 내부 마찰각과 같은 강도정수를 가진 유효응력은 실제적 적용을 고려하기 위하여 산출된다.

• 비파괴검사학회지
• /
• 제29권1호
• /
• pp.21-26
• /
• 2009

이차원 표면균열을 가진 재료의 모드 I 응력확대계수($K_1$)를 교류전위차법으로 효과적으로 계측할 수 있는 방법을 결정하기 위해 하중이 가해질 때 균열면을 포함한 시험편 내부 및 외부의 자속 변화 해석이 필요하여 이를 이론적 및 실험적으로 규명하였다. 이론 해석 결과 균열면 사이의 공기중 자속은 시험편에 하중을 가하여도 변하지 않았으며, 실험 결과와 일치하였다. 따라서 유도기전력을 많이 유도할 수 있도록 제작된 계측계로 측정한 하중에 따른 교류전위차 변화는 시험편의 내부 인덕턴스 변화와 시험편 내부 인덕턴스 변화와 관련된 상호 인덕턴스 변화에 의하여 발생한다.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.295-313
• /
• 2016

In this study, the three-dimensional finite element method is used to determine the stress intensity factor in Mode I and Mixed mode of a centered crack in an aluminum specimen repaired by a composite patch using contour integral. Various mesh densities were used to achieve convergence of the results. The effect of adhesive joint thickness, patch thickness, patch-specimen interface and layer sequence on the SIF was highlighted. The results obtained show that the patch-specimen contact surface is the best indicator of the deceleration of crack propagation, and hence of SIF reduction. Thus, the reduction in rigidity of the patch especially at adhesive layer-patch interface, allows the lowering of shear and normal stresses in the adhesive joint. The choice of the orientation of the adhesive layer-patch contact is important in the evolution of the shear and peel stresses. The patch will be more beneficial and effective while using the cross-layer on the contact surface.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.599-608
• /
• 2002

Finite element analysis for the stress intensity factor (SIF) at the skin/stiffener structure with inclined central crack repaired by composite stiffened panels is developed. A numerical investigation was conducted to characterize the fracture behavior and crack growth behavior at the inclined crack. In order to investigate the crack growth direction, maximum tangential stress (MTS) criterion are used. Also, this paper is to study the performance of the effective bonded composite patch repair of a plate containing an inclined central through-crack. The main objective of this research is the validation of the inclined crack patching design. In this paper, the reduction of stress intensity factors at the crack-tip and prediction of crack growth direction are determined to evaluate the effects of various non-dimensional design parameter including; composite patch thickness and stiffener distance. We report the results of finite element analysis on the stiffener locations and crack slant angles and discuss them in this paper. The research on cracked structure subjected to mixed mode loading is accomplished and concludes that more work using a different approaches is necessary. The authors hope the present study will aid those who are responsible for the repair of damaged aircraft structures and also provide general repair guidelines.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.75-83
• /
• 2004

본 논문에서는 사질토의 취성적 응력-변형률 관계와 전단시 체적팽창을 고려할 수 있는 구성모델에 대한 연구를 수행하였다. 제안된 모델은 일반등방경화규칙에 의거한 비등방 경화규칙을 적용하였으며, 항복면의 형태는 응력공간에서 원통형으로 나타나는 단순한 형태로 실용적으로 적용하기 편리하도록 하였다. 또한 유동규칙을 단순화하여 구체적인 팽창률 함수를 이용하여 정의하였다. 또한 가상적인 첨두응력비를 정의하여 취성적 응력-변형률 관계를 모델링하는 것이 가능하였다. 이러한 구성모델은 수학적 정식화를 한 후 실험자료와 비교하도록 프로그램을 구현하였다. 동반논문에서는 삼축실험결과와 비교하여 검증할 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.338-341
• /
• 2004

The dimension of forged part is different with the die dimension by the various effects, such as, elastic deformation and thermal effect. And, the difference amounts are not same according to the forging conditions, for example, forging mode, flow stress, etc. Therefore, the use of FEA is effective to predict and update the required die dimension. However, the variables for FE simulation are also as many as variables in the experiment. The variables give very much effect to the accuracy of FE results. At first, the material model is very deeply affected to the estimated dimension of forged part. And the considering of loading and ejecting stages is also important to increase the dimensional accuracy. The experiment and FEA are performed to investigate the dimensional changes and accuracy in cold forging. Two types of upsetting are used to survey the effects of forging mode and stages.

• International Journal of Concrete Structures and Materials
• /
• 제6권1호
• /
• pp.19-29
• /
• 2012

In this study, three isolated interior flat slab-column connections that include three types of shear reinforcement details; stirrup, shear stud and shear band were tested under reversed cyclic lateral loading to observe the capacity of slab-column connections. These reinforced joints are 2/3 scale miniatures designed to have identical punching capacities. These experiments showed that the flexural failure mode appears in most specimens while the maximum unbalanced moment and energy absorbing capacity increases effectively, with the exception of an unreinforced standard specimen. Finally, the results of the experiments, as wel l as those of experiments previously carried out by researchers, are applied to the eccentricity shear stress model presented in ACI 318-08. The failure mode is therefore defined in this study by considering the upper limits for punching shear and unbalanced moment. In addition, an intensity factor is proposed for effective widths of slabs that carry an unbalanced moment delivered by bending.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2019-2027
• /
• 2003

Pitting wear is a dominant from of polyethylene surface damage in total knee replacements, and may originate from surface cracks that propagate under repeated tribological contact. In this study, stress intensity factors, K$\_$I/and $_{4}$, were calculated for a surface crack in a polyethylene-CoCr-bone system under the rolling and/or sliding contact pressures. Crack length and load location were considered in determination of probable crack propagation mechanisms and fracture modes. Positive K$\_$I/ values were obtained for shorter cracks in rolling contact and for all crack lengths when the sliding load was apart from the crack. $_{4}$ was the greatest when the load was directly adjacent to the crack (g/a=${\pm}$1). Sliding friction caused a substantial increase of both K$\_$I/$\^$max/ and $_{4}$$\^$max/. The effective Mode I stress intensity factors, K$\_$eff/, were the greatest at g/a=${\pm}$1, showing the significance of high shear stresses generated by loads adjacent to surface cracks. Such behavior of K$\_$eff/ suggests mechanisms for surface pitting by which surface cracks may propagate along their original plane under repeated rolling or sliding contact.