• KCID journal
• /
• v.17 no.2
• /
• pp.71-81
• /
• 2010

Stream Pilot Project, which began in May 2003 and finished in December 2003, was selected to develop effective methods applicable to nature-like streams. Stream restoration projects aim to maintain or increase ecosystem goods and services while protecting downstream and coastal ecosystems. Fields environmental monitoring such as flow discharge and precipitation were conducted along the Idong stream for amount of channel zone change in 2007. This study selected three monitoring positions to measure the water level and discharge of flowing water. A stage-discharge relation is obtained from direct discharge measurements for three stations by fitting an empirical relationship to the data set. Since discharge measures are made only for low flow conditions, a curve of discharge against stage can then be built by fitting these data with a power curve. And this study used data obtained from floodmark checkup as well as HEC-RAS model to analyze the hydrodynamic characteristics of monitoring sites. Reach-averaged hydraulic parameters for the supply reach were calculated from the small area's HEC-RAS model for Idong stream, and a HEC-RAS model used to analyze hydraulics for a period in 2007, after the stream was considered bank stabilization.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.805-813
• /
• 2005

In recent years, greatly increased incidences of diseases made people more concerned about their hygienic environment. Since clothes are the closest environment to man, many methods have beef proposed to impart antimicrobial properties to the textiles. Benefits associated with incorporating antimicrobial properties in textiles include protection to the wearer from microbiological attack, and prevention of odor from perspiration. Silver has been known to kill 650 different disease organisms, however, nano-sized silver particles are known as skin friendly and does not cause skin irritation. In this study, we have examined the antimicrobial effects of cotton or polyester fabric, on which nano-sized silver particles were treated. Colloidal silver solution made by electrolysis of $99.9\%$ silver stick was more effective than that by reduction of $AgNO_3.\;0.7\%$ concentration of colloidal silver solution by electrolysis is helpful to give reduction of $99.9\%$ S. aureus and K. pneumoniae on a cotton fabric without the decrease of whiteness. Since the structures of fiber and fabric effect on their antimicrobial property, PET filament fabric didn't have sufficient antimicrobial properly. The fabrics treated with up to $5\%$ colloidal silver solution didn't have the properly of antistatic and electromagnetic shield.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.1
• /
• pp.17-25
• /
• 2014

Periodically, harmful algal blooms (HABs) have occurred, with impacts on various areas including public health, tourism, and aquatic ecosystems, especially aquacultured and caged fisheries. To prevent or manage invasions of HABs into fish farms on an emergency basis, many methods have been proposed. Frequently over the past 30 years in coastal countries, treatments of clay and clay mixed with polyaluminum chloride (PAC) and chitosan have been tested for HAB-removal effectiveness in both the laboratory and the field. In Korea, yellow loess clay (hwangto) has been dispersed using electrolytic clay dispensers, both to decrease the amount of yellow loess clay's usage in containers and enhance HAB-removal efficiency. However, this emergency method has limitations, among which is the requirement for more effective controlling agents for field applications. Thus, in this paper, we review technologies for clay-based red tides prevention and control and their limitations, and, further, introduce next-generation algicidal technologies for the emergency protection of fish farms.

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.57-61
• /
• 2009

The invasive pest Brontispa longissima(Coleoptera: Chrysomelidae), native to Indonesia and Papua New Guinea, has extended its distribution to Australia, Asia and Pacific islands and caused serious leaf damages of the coconut palm Cocos nuciferain the invaded regions. Although biological control using parasitic wasps has successfully reduced population density and leaf damage levels, this pest and its natural enemies have not been efficiently producedin conventional methods using young leaves of C. nucifera. In the present study, we examined suitability of plants easily available in Thailand and Japan for mass rearing of this pest to develop effective mass rearing system of this pest. Mature, green leaves of the palms were also suitable for immature development and adult reproduction of this pest. Since mature leaves of C. nucifera are more abundant and less contaminated with fungus than the unopened leaf buds, mature leaves could be a promising plant diet for mass rearing of B. longissima. Ornamental palms such as Hyophorbe lagenicaulis and Washingtonia filifera were also suitable for immature development and reproduction of B. longissima. Away from palms, the cattail Typha spp. can sustain immature development and adult reproduction of B. longissima. In the area where C. nucifera is rare or not available, W. filifera or Typha spp. would be good food plants for mass rearing of this pest.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.259-264
• /
• 2008

A national consultative project entitled "corrosion cost survey in China and preventive strategies" was funded by the Chinese Academy of Engineering in 1998. Soon afterwards, an expert group was organized jointly by the Institute of Metal Research, CAS and Chinese Society of Corrosion and Protection. The report on corrosion cost survey in China was published in 2003. According to this report the overall annual corrosion cost in China estimated by the Uhlig Method and Hoar Method at 1997-2001 was found to be 200.7 billion Yuan RMB and 228.8 billion Yuan RMB respectively, which is equivalent to 2% of the gross national product of China. However the total cost of corrosion including the direct and indirect cost was estimated to be more than 500 billion Yuan RMB per year in China. Among them, corrosion cost of infrastructure ranked in first comparing with other sectors. Although corrosion costs in some sectors, such as electric power, petrochemical, oil pipeline and railway in China has reduced in the past years, significant losses are still being encountered in most sectors of industries and cost-effective methods have not always been implemented. Both successful and unsuccessful cases in corrosion control and corrosion management were collected. As the investment in capital construction continues increasing rapidly in China, the maintenance and life extension of the infrastructures will become a big issue. The preventive strategies have been suggested

• Journal of Korean Biological Nursing Science
• /
• v.21 no.4
• /
• pp.318-325
• /
• 2019

Purpose: The purpose of this study was to identify the effects of a finger guard developed to prevent sharp injuries in nursing students. Methods: This study was an equivalent control group posttest design. Seventy nursing students were randomly allocated to either the experimental group (n= 35) or the control group (n= 35). The finger guard was used whileopening the glass ampoule in the experimental group. The outcome variables such as sharp injuries, anxiety and user satisfaction were measured. Results: Sharp injuries were 0 in the experimental group and 2 in the control group (p= .160). Anxiety in the experimental group was significantly lower than the control group (p< .001). User satisfaction was 4.33 score in the range from 1 to 5, the highest item was the weight (4.63), followed by effectiveness (4.51). Conclusion: Using a protective device while opening the glass ampoule was observed to be effective in reducing anxiety among the nursing students, and exhibited protection of skin.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2016

"Eco-friendly" automobile has been a symbol of the Low Carbon, Green Growth strategy that Korea government decided to pursue. In line with the recent policy trend, a number of new LPG stations are being constructed. However, communities where mass storage are installed have been suffered from risk of serious accidents. In this work, economic analyses for different installation methods has been performed to prevent accidents in LPG filling station. The review shows that the underground storage is beneficial for the maintenance and the effective land use.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.338-344
• /
• 2015

Background: The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Methods: Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. Results: The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. Conclusion: From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.55-59
• /
• 2018

Currently, the development of industry makes needs larger electric supply. Providers must consider the efficiency about losses and reliability of the system. In this case, DC power system can save electrical energy; long-distance transmission line losses. Relevance to switch technology with a voltage-source converter (VSC) in AC-DC conversion system have been researched. But, protection device of DC-link against fault current is still needed to study much. VSC DC power system is vulnerable to DC-cable short-circuit and ground faults, because DC-link has a huge size of capacitor filter which releases extremely large current during DC faults. Furthermore, DC has a fatal flaw that current zero crossing is nonexistence. To interrupt the DC, several methods which make a zero crossing is used; parallel connecting self-excited series LC circuit with main switch, LC circuit with power electronic device called hybrid DC circuit breaker. Meanwhile, self-excited oscillator needs a huge size capacitor that produces big oscillation current which makes zero crossing. This capacitor has a quite effective on the price of DCCB. In this paper, hybrid self-excited type superconducting DCCB which are using AC circuit breaker system is studied by simulation tool PSCAD/EMTDC.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3505-3516
• /
• 2021

During nuclear facility decommissioning, workers are continuously exposed to high-level radiation. Hence, adequate path planning is critical to protect workers from unnecessary radiation exposure. This work discusses recent development in radioactive path planning and the algorithms recommended for the task. Specifically, we review the conventional methods for nuclear decommissioning path planning, analyze the techniques utilized in developing algorithms, and enumerate the decision factors that should be considered to optimize path planning algorithms. As a major contribution, we present the quantitative performance comparison of different algorithms utilized in solving path planning problems in nuclear decommissioning and highlight their merits and drawbacks. Also, we discuss techniques and critical consideration necessary for efficient application of robots and robotic path planning algorithms in nuclear facility decommissioning. Moreover, we analyze the influence of obstacles and the environmental/radioactive source dynamics on algorithms' efficiency. Finally, we recommend future research focus and highlight critical improvements required for the existing approaches towards a safer and cost-effective nuclear-decommissioning project.