• Clinical and Experimental Pediatrics
• /
• v.48 no.8
• /
• pp.886-893
• /
• 2005

Purpose : Kawasaki disease is the most common cause of systemic vasculitis in children less than 5 years of age. Recent immunohistochemistry findings suggest that many vascular growth factors play a role in the formation of the coronary artery lesions. Active remodeling of the coronary artery lesions in Kawasaki disease continues in the form of intimal proliferation and neoangiogenesis for several years after the onset of the disease. Intravenous immunoglobulin(IVIG) and corticosteroid have been used in the treatment of Kawasaki disease but the exact mechanism is not clear. We have investigated that IVIG and corticosteroid inhibited vascular endothelial growth factor(VEGF)-induced tube formation of endothelial cells in vitro on Matrigel assay. Methods : Human umbilical vein endothelial cells(HUVECs) were cultured and seeded on Matrigel coated 24 well plates in medium with or without the following agents : VEGF, VEGF plus IVIG, VEGF plus VEGF antibody, VEGF plus methylprednisolone, VEGF, IVIG plus methylprednisolone for 18 hours. The total length of tube structures in each photograph was quantified. Results : IVIG significantly inhibited the proliferation of HUVECs. The inhibitory effect of IVIG was also reversible. In the meantime, VEGF induced the differentiation of HUVECs into capillary like structures on Matrigel, which was inhibited by VEGF antibody in a dose-dependent manner. Interestingly, IVIG and methylprednisolone inhibited VEGF-induced tube formation of HUVECs. IVIG was more effective in inhibition than methylprednisolone alone. Conclusion : We revealed that VEGF induced the differentiation of HUVECs and this effect was inhibited by IVIG and methylprednisolone.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1268-1280
• /
• 2019

The purpose of this study was to investigate the effects of combined exercise on irisin, body composition and glucose metabolism in obese elderly women with type 2 diabetes mellitus. The subjects were thirty-six obese elderly women with type 2 diabetes volunteers, aged 65 to 85 years, composed of the combined exercise type 2 diabetes mellitus group (n=20) and non-exercise type 2 diabetes mellitus group (n=16). The 60 minute combined exercise program (outdoor walking exercise & elastic-band exercise) was performed 3 times per week for 12 weeks. Exercise intensity of outdoor walking exercise was performed as medium intensity (RPE 5~6) and elastic-band exercise was progressively increased every four weeks (1-4 weeks: OMNI-RES 3~4, 5-8 weeks: OMNI-RES 5~6, 9-12 weeks: OMNI-RES 7~8). The results of the study in the combined exercise type 2 diabetes mellitus group were as follows; Irisin and skeletal muscle mass had significantly increased (p<.001), percentage of body fat had significantly decreased (p<.001). Further, HbA1c (p=.020) and fasting glucose (p<.001) was significantly decreased, and HOMA-β was significantly increased (p<.001). Correlation results showed that change of irisin had a significant negative correlation between percentage of body fat mass (r=-.423, p=.010), HbA1c (r=-.351, p=.036) and fasting glucose (r=-.424, p=.010). Also, irisin changes showed a positive correlation with aerobic endurance (r=.355, p=.034) and HOMA-β (r=.411, p=.013). In conclusion, the practice of regular combined exercise was found to increase the level of irisin in elderly women with type 2 diabetes and have a positive effect on body composition changes. In addition, HbA1c, fasting glucose and insulin secretion was improved, which helped to regulate glucose metabolism. Walking exercise and elastic band exercise are recommended as effective exercise for the prevention and management of diabetes in obese elderly women with type 2 diabetes mellitus.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.89-117
• /
• 2018

The Korean companies are intensifying competition with not only domestic companies but also foreign companies in globalization. In this environment, it is essential activities not only for large companies but also Small and Medium Enterprises (SMEs) to get and develop the core competency. Particularly, SMEs that are inferior to resources of various aspects, such as financial resources etc., can make innovation through effective R&D investment. And then, SMEs can occupy a competency and can be survive at the environment. Conventionally, the method of "self-development" by using only the internal resources of the company has been dominant. Recently, however, R&D method through cooperation, also called "Open Innovation", is emerging. Especially SMEs are relatively short of available internal resources. Therefore, it is necessary to utilize technology and resources through cooperation with external companies(such as joint development or contract development etc.) rather than self-development R&D. In this context, we confirmed the effect of SMEs' factors on sales in Korea. Specifically, the factors that SMEs hold are classified as 'Technical characteristic', 'Company competency', and 'R&D activity' and analyzed how they influence the sales achieved as a result of R&D. The analysis was based on a two-year statistical survey conducted by the Korean government. In addition, we confirmed the influence of the factors on the sales according to the R&D method(Self-Development vs. Open Innovation), and also observed the influence change in 29 industrial categories. The results of the study are summarized as follows: First, regression analysis shows that twelve factors of SMEs have a significant effect on sales. Specifically, 15 factors included in the analysis, 12 factors excluding 3 factors were found to have significant influence. In the technical characteristic, 'imitation period' and 'product life cycle' of the technology were confirmed. In the company competency, 'R&D led person', 'researcher number', 'intellectual property registration status', 'number of R&D attempts', and 'ratio of success to trial' were confirmed. The R&D activity was found to have a significant impact on all included factors. Second, the influence of factors on the R&D method was confirmed, and the change was confirmed in four factors. In addition, these factors were found that have different effects on sales according to the R&D method. Specifically, 'researcher number', 'number of R&D attempts', 'performance compensation system', and 'R&D investment' were found to have significant moderate effects. In other words, the moderating effect of open innovation was confirmed for four factors. Third, on the industrial classification, it is confirmed that different factors have a significant influence on each industrial classification. At this point, it was confirmed that at least one factor, up to nine factors had a significant effect on the sales according to the industrial classification. Furthermore, different moderate effects have been confirmed in the industrial classification and R&D method. In the moderate effect, up to eight significant moderate effects were confirmed according to the industrial classification. In particular, 'R&D investment' and 'performance compensation system' were confirmed to be the most common moderating effect by each 12 times and 11 times in all industrial classification. This study provides the following suggestions: First, it is necessary for SMEs to determine the R&D method in consideration of the characteristics of the technology to be R&D as well as the enterprise competency and the R&D activity. In addition, there is a need to identify and concentrate on the factors that increase sales in R&D decisions, which are mainly affected by the industry classification to which the company belongs. Second, governments that support SMEs' R&D need to provide guidelines that are fit to their situation. It is necessary to differentiate the support for the company considering various factors such as technology and R&D purpose for their effective budget execution. Finally, based on the results of this study, we urge the need to reconsider the effectiveness of existing SME support policies.

• Weed & Turfgrass Science
• /
• v.7 no.1
• /
• pp.35-45
• /
• 2018

The seaweed Ulva spp., which is frequently bloomed in coastal areas, have negatively affected on marine ecosystem and industrial activities. Therefore, many researches have been conducted to solve this problem in the worldwide. In this study, we carried out several experiments to develop the methods for effectively controlling Ulva growth through an alone or mixture application of chemical and temperature. Three chemical mixtures ($H_2O_2$+N-vanillylnonanamide; $H_2O_2$+nonanoic acid; $H_2O_2$+sodium citrate), those had a synergistic effect to the death of Ulva australis (ULAUS), were found out. On the other hand, the death of ULAUS was significantly enhanced and accelerated as some chemicals were briefly treated with warm water of $40^{\circ}C$ rather than $25^{\circ}C$, showing that peracetic acid 100 ppm, sodium percarbonate 100 ppm, and hydrogen peroxide 30 ppm has a better activity than that of sodium chlorite 200 ppm and menadione sodium bisulfite 4 ppm. In addition, a strong synergistic effect to the death of ULAUS thallus was also observed when the sodium citrate 1,000 ppm (pH 3.0) or acetic acid 200 ppm (pH 3.5) solution prepared in f/2 medium were treated in a short time at $40^{\circ}C$. However, an additive effect was only appeared as pH values of their solutions were increased to 8.0. Taken together, It seemed that our results could be developed as one of an eco-friendly practical measures useful for alleviating Ulva bloom in the future.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2003

Purpose : The purpose of this study was to analyze the effect of a Linear accelerator based Photon Knife Radiosurgery System developed by the staff of Keimyung University Dongsan Medical Center for the treatment of cerebral arterlovenous malformation Material and Methods : Between December 1993 and October 2000, 30 patients with cerebral arteriovenous malformation (AVM) were treated with the Linac based Photon knife Radlosurgery System In the Department of Therapeutlc Radiology at Keimyung University Dongsan Medical Center. The median age was 34, ranging from 7 to 63 years, with a 2 : 1 male to female ratio. The locations of the AVM nidi were the frontal lobe (motor cortex), parletal lobe, and the thalamus, In that order. The diameters of the AVM nidi ranged 1.2 to 5.5 cm with a mean on 2.9 cm, and target volumes of between 0.5 and 20.5 cc, with a mean of 5.8 cc. The majority of patients received radiation doses of between 1,500 and 2,500 cGy, w14h a mean of 2,000 cGy, at 80% the isodose line. Twenty-five patients were treated with one isocenter, 4 with two, and 1 with four. The follow-up radiological evaluations were peformed with cranial computed tomogram (CT) or MRI between 6 month and one year interval, and if the AVM nidus had completely disappeared in the CT or MRI, we confirmed thls was a complete obliteration, with a cerebral or magnetic resonance angiogram (MRA). The median iollow-up period was 39 months with a range of 10 to 103 months. Results : Twenty patients were radloiogicaiiy followed up ior over 20 months, with complete obliteration observed in 14 (70%). According to the maximal diameter, all four of the small AVM (<2 cm) completely obliterated, 8 of the 10 patients with a medium AVW (2~3 cm) showed a complete obliteration, and two showed partial obliteration. Among the patients with a large AVM (>3 cm), only one showed complete obliteration, and S showed partial obliteration, but 3 oT these underwent further radiosurgery 3 years later. One who followed up for 20 months fellowing further radiosurgery eventually showed complete obliteration. Ten patients with seizure symptoms had no recurrent seizure due to radiosurgery and medication. One of the eleven patients who suffered intracranlal bleeding developed further bleeding at 9 and 51 months fellowing the radiosurgery although complete obliteration was eventually observed and the patient was managed in hospital then recovered. No patient suffered severe complications fellowing the radiosurgery. Conclusion : The radiosurgery with Linac-based Photon knife radiosurgery system, developed by the staff at our hospital, is a safe and effective treatment for AVM patients having diameters or volumes of less than 3 cm or 10 cm$^{3}$, respectively, located In Inoperable areas or who refused neurosurgery. We suggest that staged AVM radiosurgery may initially be considered, if the AVM target volume is above 10 cm$^{3}$

• Journal of Mushroom
• /
• v.12 no.2
• /
• pp.132-137
• /
• 2014

Green mold disease caused by Trichoderma species has recently caused considerable damage to oyster mushroom industries in Korea. This disease Trichoderma, Penicillium, Aspergillus, such as in (genus) to be included in a disease caused by a species that collectively the largest incidence and damage is caused by the pathogen Trichoderma genus. T. longibrachiatum, Trichoderma koningii, Trichoderma virens, T. hazianum, T. atroviride, and T. pseudokoningii were detected on oyster mushroom beds and, of them, T. virens, T. hazianum, T. longibrachiatum was the most frequently detected. The knowledge concerning physiological and ecological properties of Trichoderma spp. was essential for their effective control. T. longibrachiatum hyphal growth is very fast, spore formation, and, particularly well-chlamydospore formation characteristics, and reviews are dark green discoloration. T. koningii, fast mycelial growth, aerial hyphae and spores in aerial hyphae formation is concentrated. T. virens, especially if the color change caused by spore-forming, slow, late in infection, the more severe the damage is discovered. T. hazianum fast mycelial growth, white aerial hyphae and late turns dark green. After spore formation hyphae glob of white pustules or tufts on the top of the formation. T. atroviride. aerial hyphae usually the mycelial growth and spore formation in the unlikely event of the formation and smells similar to the smell of coconut is that. Fast T. pseudokoningii mycelial growth, spore formation is formed around the inoculation site, discoloration of the medium color and well formed chlamydospores.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.210-219
• /
• 2017

This study was conducted to establish an efficient screening method for radish (Raphanus sativus) cultivars that are resistant to black spot, which is caused by Alternaria brassicicola. Seven A. brassicicola isolates were selected and investigated for their ability to produce spores and pathogenicity. Of these isolates, A. brassicicola KACC 40036 and 43923 produced abundant spores in V-8 juice agar medium and showed pathogenicity and strong virulence on radish seedlings. We examined the resistance of 61 commercial cultivars of radish to A. brassicicola KACC40036, and found that there are no highly resistant radish cultivars; however, some cultivars, such as 'Geumbong' and 'Searom', showed weak resistance to A. brassicicola. For further study, we selected four radish cultivars that showed different disease responses to A. brassicicola KACC40036. According to the growth stage of the radish seedlings, inoculum concentration, and incubation temperature of radish, development of black spot on four cultivars has been investigated. The results showed that younger seedlings were more sensitive to A. brassicicola than older seedlings, and the disease severity depended on the concentration of the spore suspension. The disease severity of plants incubated in humidity chamber at $25^{\circ}C$ was greater than that of plants grown at $20^{\circ}C$ or $30^{\circ}C$. Taken together, we suggest the following method for screening for radish plants that are resistant to A. brassicicola: 1) inoculate 16-day-old radish seedlings with an A. brassicicola spore suspension ($2.0{\times}10^5spores{\cdot}mL^{-1}$) using the spray method, 2) incubate the inoculated plants in a humidity chamber at $25^{\circ}C$ for 24 h and then transfer the plants to a growth chamber at $25^{\circ}C$ with 80% relative humidity under a 12 h light/dark cycle, and 3) assess the disease severity of the plants two days after inoculation.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.95-105
• /
• 2013

Recently, SME's Collaboration activities have become one of a vital factor for sustaining competitive edge. This is because of the rapidly changing and competitive market environment, and also to leverage performance by overcoming obstacles of having limited internal resources. Discussing about the effects and relationships of the firm's collaboration activities and its outputs are not new. However, as ICT and various technologies have been diffused into the traditional industries, boundaries and practice capabilities within the industries are becoming ambiguous. Thus contents of the products/services and their development methods are also go and come over the industries. Although many researchers suggested the relations of SME's collaboration activities and innovation performances, most of the previous literatures are focusing on broad perspectives of firm's environmental factors rather than considering various SME's idiosyncrasy factors such as their major product and customer types at once. Therefore, the purpose of this paper is to analyze how SME(Small Medium Enterprise)'s external collaboration activities by their idiosyncrasy act as an input to types of innovation performance. In order to analyze collaboration effects in detail, we defined factors that can represent the SME's business environment - Perceived importance of using external resources, Perceived importance of external partnership, Collaboration and Collaboration levels of Major Product types, Customer types and lastly the Firm Sizes. We have also specifically divided the performance of innovation types as product innovation and process innovation based on existing research. In this study, the empirical analysis is based on Probit Regression Model to observe the correlations with the impact of each SME's business environment and their activities. For the empirical data, 497 samples were collected which, this sample data was extracted from the 'Korean Open Innovation Survey' performed by ETRI(Korean Electronics Telecommunications Research Institute) in 2010. As a result, empirical test results indicated that the impact of collaboration varies depend on the innovation types (Product and Process Innovation). The Impact of the collaboration level for the product innovation tend to be more effective when SMEs are developing for a final product, targeting on for individual customers (B2C). But on the other hand, the analysis result of the Process innovation tend to be higher than the product innovation, when SMEs are developing raw materials for their partners or to other firms targeting on for manufacturing industries(B2B). Also perceived importance of using external resources has effected to both product and process innovation performance. But Perceived importance of external partnership was statistically insignificant. Interesting finding was that the service product has negative effects on for the process innovation performance. And Relationship between size of the firms and their external collaboration activities with their performance of the innovations indicated that the bigger firms(over 100 of employees) tend to have better for both product and process innovations. Finally, implications of the results can be suggested as performance of innovation can be varied depends on firm's unique business idiosyncrasy as well as levels of external collaboration activities. The Implication of this research can be considered for firms in selecting an appropriate strategy as well as for policy makers.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.725-736
• /
• 2017

TThis study investigated the influence of AGH-Ringer (chelated organic minerals liquid fertilizer) on the growth, yield, and fruit quality of 'Jukhyang' strawberry in a hydroponic system. The results revealed that AGH-Ringer group led to significantly higher plant length than that of the control group, and that leaf length and leaf width increased with increasing leaf area. In addition, the fresh and dry weights of leaves and SPAD unit, which measures leaf color also showed a significant increase with AGH-Ringer. However, the length and dry weight of roots did not show significant differences when compared to the control group. In the fruit quality analysis, AGH-Ringer group did not show any difference in fruit length compared to the control group, but it increased both the fruit weight, which, along with the simultaneous increase in fruit width, increased the yield per strawberry. Furthermore, AGH-Ringer group strengthened the red skin color of the fruit, and resulted in significantly greater hardness than that of the control group, but did not have any effect on the soluble solid content and acidity. As shown in the results, the AGH-Ringer group resulted in lesser mineral content and lower to medium EC (electrical conductivity) in comparison to the inorganic mineral hydroponic fertilizer, which was used as a control. However, it increased the leaf growth, fruit weight, and yield, and improved the fruit quality by increasing the soluble solid content in the hydroponic system of 'Jukhyang' strawberry. Therefore, based on this study, AGH-Ringer is thought to be a more effective hydroponic fertilizer than the inorganic mineral hydroponic fertilizer. Moreover, the field experiment demonstrated that AGH-Ringer is a useful hydroponic fertilizer convenient for application in farms. This study also proved that AGH-Ringer is a fertilizer that can promote plant nutrition by controlling the salinity of the soil and facilitating the absorption of necessary minerals in future soil cultivation, thereby providing basic data for organic farming.