• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.183-200
• /
• 1989

An experiment was conducted at the greenhouse of the International Rice Research Institute in 1987 to find out the character of dry matter production, the potential seed production ability and the ecological and physiological strategies to adaptation. For these, two rice cultivars, IR64(lowland rice) and UPLRi-5(upland rice), and seven weed species were used ; Echinochloa glabrescens Munro ex Hook. f., E. cress-galls ssp. hispidula (Retz.) Honda, E. colons (L.) Link, Monochoria vaginalis (Burin. f.), Ludwigia octovalvis Jacq.) Raven, Fimbristylis miliacea Vahl and Cyperus difformis L. Adaptation strategies of weed species varied by species. However, they had efficient seed production strategy through different ways. In general, sedge weed species (F. miliacea and C. difformis) produced great amount of seeds at the expense of seed size through greater ratooning ability and low relative dry weight for flowering. For broadleaved weed species, greater number of descendants were obtained through high plasticity and low relative dry weight for flowering (M. vaginalis) or greater growth ability through effective photosynthetic efficiency (L. octovalvis). Grass weed species, on the other hand, produced their seeds through effective growth (net assimilation rate and relative growth rate), high ratooning ability (except E. crus-galls ssp. hispidula) or low relative dry weight to maximum dry weight for flowering (E. glabrescens). The harvest indices of the weed species were considerably lower than those of rice. Fimbristylis miliacea had the greatest ratooning ability followed by C. difformis, E. colons and E. glabrescens. The greatest seed productivity was recorded by C. difformis (279, 000) and L. octovalvis (268,000) while rice produced the least number of seeds (1300-6100). Log seed weight had a negative linear relationship with log seed number (y=6.30-1.48X, $R=-0.965^{**}$). For all species plant plasticity response was not directly correlated with mortality response.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.2 s.46
• /
• pp.337-365
• /
• 1994

Rubella is a viral disease with mild constitutional symptoms and generalized rashes. In childhood, it is an inconsequential illness, but when it occurs during early pregnant period, there are significant risks of heart defects, cataract, mental retardation to the fetus. The series of congenital defects induced by rubella is called 'congenital rubella syndrome'. Many research have been performed to find out more effective prevention program on rubella. The objectives of this study are, first, to calculate the incidence rate of acute rubella infection and congenital rubella syndrome in Korea, second, to evaluate economic efficiency of several rubella vaccination policies and to offer data for the most reasonable decision on vaccination policy. Study populations are 663,312 children of one year-old in 1992. The author has performed cost-benefit analyses according to the three vaccination policies-U.S.A.'s. U.K.'s and Sweden's. In this Study, the author got the incidence rate of acute rubella infection using the catalytic model. In the meantime, the author used 50 per 100,000 live births as the incidence rate of congenital rubella syndrome. The discount rate used in this study was 5 percent per annum. The sensitivity analyses were done with different discount rates (4%, 7%) and different incidence rate of congenital rubella syndrome (10,100 per 100,000 live births) : The study results are as follows: 1. Without vaccination, lifetime expenditures per patient for acute rubella infeciton amount to 14,822 won and the total expenditures to about 3.1 billion won. Meanwhile, lifetime expenditures per patient for congenital rubella syndrome amount to about 91 million won and the total expenditures to about 16.3 billion won without vaccination. 2. The cost of vaccination for a child of one year old was 2,322 won and the total cost for the one year old children was about 1.5 billion won (American style). The cost for vaccination of female children at fifteen was about 339 million won (Birtish style). And the cost of vaccination at one for both sex and female children at fifteen was about 1.9 billion won (Swedish style). 3. The benefit to cost ratios of vaccination of female children at fifteen that is the british mode of rubella vaccination, was 60.0 at the level of 80% population coverage and 48.6 at 100% coverage. It shows much higher benefit to cost ratio than those of the other two vaccination policies. 4. Both net benefits of vaccination at one (American style) and that of vaccinations at one and fifteen (Swedish style) range from about 17.0 billion to 17.8 billion won, those were larger than that of vaccinations of female children at fifteen (Birtish style, about 16.0 billion). 5. In marginal cost-benefit analysis of only additional program of revaccination, the benefit to cost ratios were 3.6 (80% coverage rate) or 0.6 (100% coverage rate). It implies that additional program was less efficient or inefficient. 6. In sensitivity analysis with different discount rates(4% or 7%) and different incidence rates of congenital rubella syndrome (10 or 100 per 100,000 live births), the benefit to cost ratios has fluctuated in wide range. However, all the ratios of vaccination of female children at fifteen were higher than those of the others. Even under the most conservative assumption, the benefit to cost ratios of all the rubella vaccination policies were higher than 3.3. In conclusion, all the rubella vaccination policies found to be cost-effective and particularly the vaccination of female children at fifteen was strongly recommended.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.94-104
• /
• 2009

It is urgently required to develop the production of fermentation-heat energy from the waste agricultural and forest biomass and its effective heat exchanging system for the supply of warm water to rural households and greenhouses. In this study 3 helical-type and 1 plate-type heat exchangers using 3 different waste biomasses [e.g. hardwood (HW) sawdust (100%), softwood (SW) sawdust : HW sawdust (50 : 50) and HW sawdust : grass (90 : 10)] were applied in order to find out the best heat recovery system. The heat exchanger was basically considered to improve the overall heat recovery efficiency, to minimize heat loss and to simplify manufacturing, assembling and breaking up the fermenting beds. The helical-type heat exchanger (HX-H3) installed in fermenting bed of HW sawdust : grass (90 : 10) showed relatively higher temperature profiles, in particular mid- and upper-parts than lower and surface parts during 45-day fermentation process. The maximum temperature was ranged from $40^{\circ}C$ to $65^{\circ}C$ with average $60^{\circ}C$. The water temperature of tank outlet was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. By the way plate-type one (HX-P) installed in same biomass compositional fermenting bed showed $64.5{\sim}76.5^{\circ}C$ at center part, and $43{\sim}56^{\circ}C$ and $42{\sim}58^{\circ}C$, water tank and tank outlet temperatures, respectively, during 100 day measurement. It could be concluded that the plate-type heat exchanger (HX-P) provides not only the effective heating for the rural households and greenhouses, but also having the best heat recovery performance, easy manufacturing, assembling and breaking up the systems.

• Journal of Nutrition and Health
• /
• v.41 no.2
• /
• pp.147-155
• /
• 2008

Medical nutrition therapy (MNT) is considered a keystone of medical treatment of chronic diseases. However, only few studies have evaluated medical and economical outcome of MNT. The study was performed on the patient with type 2 diabetes mellitus to evaluate the effect of clinical and cost-effective outcomes of MNT. Subjects from two general hospitals were randomly assigned to two different groups; One receiving basic nutritional education (BE) (n = 35), and the other receiving intensive nutritional education (IE) (n = 32) for a 6-month clinical trial. The group which received BE had a single visit with a dietitian, while the other group which received IE had an initial visit with a dietitian addition to two visits during the first 4 weeks of the study periods. Anthropometric parameters, blood components, and dietary intake were measures at the beginning of study period and after 6 month. Cost-effective analysis included direct labor costs, educational materials and medication cost difference during 6 months. After 6 month, subjects from IE group showed significant reduction of body weight (p <0.05) and systolic blood pressure (p <0.05), whereas BE group did not show any significant changes. Result from biochemical indices showed glycated hemoglobin concentration was significantly reduced by 0.7% (p <0.05) only in the IE group. The ratio of energy intake to prescribed energy intake decreased significantly in both groups (p <0.05). Mean time taken for a dietitian to educate the subject was 67.9 ${\pm}$ 9.3 min/person for BE group, while 96.4 ${\pm}$ 12.2 min/person for IE group. Mean number of educational materials was 1.9 ${\pm}$ 0.7/person for BE group and 2.5 ${\pm}$ 0.7/person for IE group. Change in glycated hemoglobin level along the 6 month period of study can be achieved with an investment of \88,510/% by implementing BE and \53,691/% by implementing IE. Considering the net cost-effect of blood glucose control and HbA Ic, IE which provides MNT by dietitian had a cost efficiency advantage than that of BE. According to this study, MNT provided by dietitian had a significant improvements in medical and clinical outcomes compared to that of BE intervention. Therefore, MNT protocol should be performed by systemic intensive nutrition care by dietitian in clinical setting to achieve good therapeutic results of DM with lower cost.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.268-273
• /
• 2015

BACKGROUND: Petroleum-contaminated soil from leaking above- and underground storage tanks and spillage during transport of petroleum products is widespread environmental problem in recent years. Application of compost may be the most promising, cost-effective, and eco-friendly technology for soil bioremediation because of its advantages over physical and chemical technology. The objective of this study was to evaluate effect of compost application on degradation of total petroleum hydrocarbon (TPH) in petroleum hydrocarbon-contaminated soil.METHOD AND RESULTS: An arable soil was artificially contaminated by diesel, and compost was applied at the different rate of 0, 10, 30, and 50 Mg/ha. Concentration of TPH in the soil decreased as application rate of compost increased. Degradation efficiency was highest at compost 30 Mg/ha; however, it slightly decreased with compost 50 Mg/ha. Kinetic modeling was performed to estimate the rates of chemical reaction. The correlation coefficient (R2) values for the linear plots using the second-order model were higher than those using the first-oder model. Compost 30 and 50 Mg/ha had the fastest TPH degradation rate in the second-order model. Change of microbial population in soil with compost application was similar to that of TPH. Microbial population in the soil increased as application rate of compost increased. Increasing microbial population in the contaminated soil corresponded to decreased in TPH concentration.CONCLUSION: Conclusively, compost application for soil bioremediation could be an effective response to petroleum hydrocarbon-contaminated soil. The increase in microbial population with compost suggested that compost application at an optimum rate might enhance degradation of TPH in soil.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.219-226
• /
• 2010

In order to evaluate a removal characteristic of chloramphenicol, salicylic acid and ketoprofen according to dose of oxidants, $Cl_2$, $O_3$ and $O_3/H_2O_2$ are used as oxidants in this study. In case of that $Cl_2$ is used for oxidizing harmaceuticals, chloramphenicol, salicylic acid and ketoprofen is not removed entirely at $Cl_2$ dose rang of 0.5~5.0 mg/L for 60 min. However, removal tendency of salicylic acid is so obviously at $Cl_2$ dose higher than 1.0 mg/L. In addition, as $Cl_2$ dose and contact time increase, the removal rate of salicylic acid is enhanced. When $O_3$ is used as oxidant, chloramphenicol and ketoprofen is not eliminated at $O_3$ dose range of 0.2~2.0 mg/L. On the contrary, 30~70% of salicylic acid is removed at $O_3$ dose of 1.0~5.0 mg/L. Only 30% removal of salicylic acid is achieved at contact time of 5 min, however, the removal rate is enhanced remarkably at contact time over 10 min. In experiments using $O_3/H_2O_2$ as an oxidant, we can find that $O_3/H_2O_2$ is much more effective than $O_3$ only for removal of 3 pharmaceuticals, and the efficiency is raised according to increase of $H_2O_2$ dose. On reaction rate constant and half-life of 3 pharmaceuticals depending on $Cl_2$, $O_3$ and $O_3/H_2O_2$ dose, experiments using $O_3/H_2O_2$ show that oxidation of pharmaceuticals is less effective as the $H_2O_2/O_3$ ratio increases to above pproximately 1.0 related to reaction rate constant. An oxidation of salicylic acid by $Cl_2$ and $O_3$ particularly has a comparatively high reaction rate constant comparing $O_3/H_2O_2$, and thus salicylic acid is easily eliminated in oxidation processes.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.237-242
• /
• 2002

Loaves, stems, cotyledons, and roots of Hovenia dulcis Thunb grown in test tube were cultured on media containing different concentrations of single or combined growth regulators. In MS media containing 2mg/ι BA, the shoot formation rate was 95.5% and it was the highest frequency of shoot formation. MS media showed most efficiency in the shoot formation at 0.01mg/ι TDZ for the callus formation, but the color of callus changed to brown at a higher concentration of TDZ. Callus formation was 89.% at 0.5mg/ 2.4-D, but IAA, IBA, and NAA were not effective on the formation of callus. Calli were formed only on wound area when IAA, IBA, and NAA were added into MS media. Combined growth regulators (BA + auxin) were more effective in roots and nodes than leaves and cotyledons on the formation of shoot. More than 97％ of shoot formation was obtained on MS media containing BA and auxin. For the production of multiple shoot, nodes of Hovenia dulcis were used and effect of growth regulators on the formation of multiple shoot was evaluated on MS media. Highest shoots (5.3) of Hovenia dulcis were induced on MS media supplied with 0.1mg/ι BA and 0.1mg/ι NAA, and an average of 6.4 shoots per explant were obtained in 1/2 MS media containing same concentration and growth regulators. An average of 7 shoots per explant after 4 weeks of culture from nodes of Hovenia dulcis was produced on a woody plant medium(WPM) containing 0.1mg/ι BA and 0.1mg/ι NAA. Shoot length was 6.0 cm in average.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.1
• /
• pp.38-46
• /
• 2002

Chrysanthemum boreale M. (hereafter, C. boreale M.), a perennial flower, has been historically used as a natural medicine in Korea. With increasing concerns for health-improving foods, the demand for C. boreale M. has become higher than ever. Howevr, the amount of wild C. boreale M. collected from mountainous areas is not enough to cover all demands. The cultivation system and fertilization strategy are required to meet increasing demand on C. boreale M. with a good quality. We investigated the effects of nitrogen application on plant growth and effective components of C. boreale M. to suggest optimum rate of nitrogen fertilization. C. boreale M. was cultivated in a pot scale (1/2000a scale), and nitrogen applied with rate of 0(N0), 50(N50), 100(N100), 150(N150), 200(N200), and $250(N250)kg\;ha^{-1}$. Phosphate and potassium were applied at the same level ($P_2O_5-K_2O=80-80kg\;ha^{-1}$) in all treatments. Maximum yield achieved in 246 and $226kg\;ha^{-1}$ N treatment on the whole plant and the flower part, a valuable part as a herbal medicine, respectively. Proline was the most abundant amino acid in the flower of C boreal M. and the contents of amino acids increased with increasing nitrogen application rate in flower. Nitrogen recovery efficiency was high more than 41% in all nitrogen treatments and increased to 61.8% in nitrogen N100 treatment. From the nitrogen content, the high nitrogen uptake, the low residue of mineral N and the reasonably good apparent fertilizer recovery, it can be inferred that C. boreale M. made efficient use of the available nitrogen. In flower, contents of Cumambrin A. which is a sesquiterpene compound and has the effect of blood-pressure reduction, decreased with increasing nitrogen application. However, the amount of Cumambrin A in flower increased as nitrogen rate increased, because of increasing flower yield. Conclusively, nitrogen fertilization could increase yields and enhance quality. The optimum nitrogen application rate might be on the range of $225{\sim}250kg\;ha^{-1}$ in a mountainous soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.55-62
• /
• 2019

Rapeseed meal, which is a byproduct of rapeseed oil extraction, improves crop productivity by supplying nutrients to the soil. The present study aimed to manufacture fermented rapeseed meal compost using two effective microbial agents and evaluate their efficiency as fertilizer. To types of fermented rapeseed meal, manufactured using either a bio-carrier or microbial agent, showed no differences in pH, electrical conductivity (EC), and total nitrogen content. However, the contents of $NH_4-N$ and $NO_3-N$ as inorganic nitrogen were increased by 5.6 times and 1.5 times, respectively, after 5 d of fermentation. Rapeseed meal fermented for 5 d was applied to tomato a basal fertilizer and after eight weeks, the plant height increased in all fermented rapeseed treatments compared to that in the chemical fertilizer treatment, and also the quantum yield of photosystem II (PS II) showed the same trend. The total nitrogen content of tomato leaves treated with a microbial fermented rapeseed meal was twice as high as that of that treated with a chemical fertilizer. It was confirmed that the increase in the tomato height was an effect of the rapeseed meal containing inorganic nitrogen, which can easily be absorbed by plants. From these results, it is considered that fermented rapeseed meal manufactured with an effective microbial agent for 5 d showed the highest inorganic nutrient content and greatest growth enhancement in tomato.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.127-143
• /
• 2022

Recently, many attempts to run numerical ocean models in cloud computing environments have been tried actively. A cloud computing environment can be an effective means to implement numerical ocean models requiring a large-scale resource or quickly preparing modeling environment for global or large-scale grids. Many commercial and private cloud computing systems provide technologies such as virtualization, high-performance CPUs and instances, ether-net based high-performance-networking, and remote direct memory access for High Performance Computing (HPC). These new features facilitate ocean modeling experimentation on commercial cloud computing systems. Many scientists and engineers expect cloud computing to become mainstream in the near future. Analysis of the performance and features of commercial cloud services for numerical modeling is essential in order to select appropriate systems as this can help to minimize execution time and the amount of resources utilized. The effect of cache memory is large in the processing structure of the ocean numerical model, which processes input/output of data in a multidimensional array structure, and the speed of the network is important due to the communication characteristics through which a large amount of data moves. In this study, the performance of the Regional Ocean Modeling System (ROMS), the High Performance Linpack (HPL) benchmarking software package, and STREAM, the memory benchmark were evaluated and compared on commercial cloud systems to provide information for the transition of other ocean models into cloud computing. Through analysis of actual performance data and configuration settings obtained from virtualization-based commercial clouds, we evaluated the efficiency of the computer resources for the various model grid sizes in the virtualization-based cloud systems. We found that cache hierarchy and capacity are crucial in the performance of ROMS using huge memory. The memory latency time is also important in the performance. Increasing the number of cores to reduce the running time for numerical modeling is more effective with large grid sizes than with small grid sizes. Our analysis results will be helpful as a reference for constructing the best computing system in the cloud to minimize time and cost for numerical ocean modeling.