• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.699-704
• /
• 2017

The amount of electric power for photovoltaic power generation depends on the location of the power plant and the direction of solar cell. The solar cell controls the generation of solar power plants. Therefore, the structure of solar cell, manufacturing method, and optic technology were factors contributing to increased solar cell efficiency; however, the technical limit has been reached. Herein, we propose a new method to increase the solar cell efficiency using a wavelength conversion technology that converts ultraviolet and infrared rays, which are not effectively used in solar cells, into effective wavelength of solar cell. We used fluoride $Na(Ca)YF_4$ phosphor for wavelength conversion. Then, a wavelength-conversion fluorescent paste, prepared using an organic-silicon binder, was used to prepare a film that was applied to Si solar cells. It was confirmed that conversion efficiency improved by 5% or more.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.225-226
• /
• 2014

본 연구의 목적은 동북아시아 주요 컨테이너항만간의 상대적 효율성을 분석함으로써, 각 항만의 현재 효율성 수준을 파악하고, 효율적 항만이 되기 위한 주요 전략수립 방안을 제시하고자 하는 것이다. 동북아시아 지역의 주요 16개 항만을 대상으로 개별항만 효율성 및 상대적 효율성을 분석하였으며, DEA기법을 사용 ${\cdots}$(중략)${\cdots}$.

• 한국대기환경학회지
• /
• 제14권3호
• /
• pp.237-250
• /
• 1998

In this study, the characteristics of electrostatic bag filter to overcome the main problems such as the high pressure drop and low collection efficiency for submicron particles are investigated with the experimental parameters. Especially, the experiment is carried out focusing on collection efficiency and pressure drop change mechanism as a function of discharge electrode shapes and filter properties, including the applied voltages, filtration velocities and particle concentrations, etc . Results show that the collection efficiency is improved over 30% for the fine particle below 1 pm and pressure drop reduction ratio (PDRR) increases in the following order 4 mm screwy > 4 mm square > 4mm round discharge electrodes . For the filter properties, Nomex is more effective than PE under the influence of electrostatic force. Applying 30 kV for a screwy discharge electrode, higher overall collection efficiency is maintained in spite of the increment of filtration velocity over four times (8 m/min) in comparison with that of 2 m/min and PDRR are highly shown over 80o1o with various filtration velocities, 5, 8, 11 m/min.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.921-930
• /
• 2013

From an economic perspective, an enterprise's business activity depends on the efficient use of corporate resources for generating profits. However, on the enterprise side, it is difficult to measure and evaluate the effective use of each resource. This paper suggests an alternative for eliminating process inefficiencies in the consolidation of competitive power in auto parts manufacturing company A. Multitudinous process variables from company A's raw materials-to-shipment process are configured as input resources, and a Data Envelopment Analysis(DEA) is carried out to determine economical benefit of said resources' operation, as well as how products are manufactured. The DEA model offers a non-parametric approach to measuring relative efficiency using input and output factors. Furthermore, AHP is used for logically deciding the importance of each evaluation factor. In general, DEA models have been used for measuring efficiency of the service and public sectors. However, this study focused on measuring the efficiency of SMEs production lines.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.39-46
• /
• 2009

A method to improve water treatment efficiency by coagulant overdosing for high pH raw water at a drinking water treatment plant (WTP) which had no pH adjusting facilities was investigated. Poly aluminum chloride (PACl) was used for coagulant, and turbidity removal efficiency was evaluated as a function of PACl dosage increases. pH and turbidity of supernatant of jar-tester were 7.10 and 0.50 NTU respectively, when the turbidity, pH, alkalinity, water temperature, conductivity of raw water were 1.75 NTU, 9.38, 46.5 mg/L, $6.4^{\circ}C$, $400{\mu}s/cm$, respectively. Turbidity of settled water was reduced from 2.18 NTU to 0.28 NTU (87% reduction) when PACl dosage was increased from 16 mg/L to 45 mg/L at a full scale WTP. This can be attributed to the recovery of coagulant efficiency by pH reduction with the increase of coagulant dose, however coagulation efficiency was reduced with the formation of Al(OH)4- by PACl addition at higher pH. Coagulant overdosing was proven to be a rapid and effective method for high pH raw water, which can be applied at drinking WTP.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.367-372
• /
• 2008

This study configured the conventional $A^2O$ (Anaerobic-Anoxic-Aerobic bioreactor) system which the fixed media immersed into the anoxic reactor(Named PFR system : Plug Flow Reactor) for evaluating the removal efficiency of nitrogen in the wastewater. The experimental equipment was a cylinder which was consist of 4 pleated PE Pipes(Length 330M, Diameter 100mm) including 2 rope shape media. As a result, the average effluent T-N removal efficiency of the conventional $A^2O$ system was 17.9, 40.3, 50.6, 44.6% in each mode, but the average effluent T-N removal efficiency of the PFR system could achieve 38.8, 57.1, 71.8, 65.4% in each mode. It indicated that the PFR system caused to the increasing of C/N ratio that effected to the increasing of the denitrification efficiency. Not only the effective T-N removal efficiency but also the controllable install space will give advantages for retrofitting of the wastewater treatment plant with the conventional treatment system to the PFR system.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.132-138
• /
• 2015

This study examined the relative effects of feedback frequency and specificity of Eco-IVIS(eco in-vehicle information system) on the fuel-efficiency and workload. Eighty participants randomly assigned into four experimental groups (high frequency/specific, high frequency/global, low frequency/specific, and low frequency/global feedback) and they drove 16.4Km motorway under the each feedback condition. The dependent variable were fuel efficiency and Drive Activity Load Index which measured participants' subjective ratings of driving workload. The results showed that high frequent feedback was more effective for increasing fuel-efficiency than low frequent feedback, however, there was no significant difference of fuel-efficiency between specific and global feedback. Although, overall DALI score was comparable among four experimental conditions, visual demand score was significant higher under the high frequent feedback condition than low frequent feedback.

• 보건행정학회지
• /
• 제10권4호
• /
• pp.75-98
• /
• 2000

This study applied Data Envelopment Analysis(DEA) and Ratio Analysis and Regression Analysis to a set of Korean Public Corporation Medical Centers to evaluate their relative human resource efficiencies. The output measure used in this study was based on health insurance system which was used in both in-patient departments and out-patient departments. Inputs included working time of the doctors, nurses, technicians, and managerial department staff. Based on the data provided on the inputs and outputs, the analysis showed 23 of the 34 hospitals to be relatively inefficient. Each hospital with an efficiency rating of less than 1 was considered relatively inefficient. In addition, managerial strategies based on dual variables were constructed to indicate the manner In which inefficient hospitals may be made efficient. A subsequent analysis of t-test revealed that the bed occupancy rate, medical revenue per 100beds, value added revenue per staff, medical revenue per staff were statistically significant. The results of this study suggest the DEA is a promising tool for evaluating relative human resource efficiency in hospitals which have multiple inputs and outputs and where the efficient production function is not specifiable with any precision. But it is considered that efficiency evaluations may be most effective]y accomplished by Incorporating a combination of methodologies such as ratio analysis and regression analysis.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.85-92
• /
• 2005

One of the most effective methods for utilizing solar energy is to combine thermal solar and optical energy simultaneously using a hybrid panel. Many systems using various kinds of photovoltaic panels have already been constructed. But utilizing solar energy by means of a hybrid panel with concentrator has not been to be attempted yet. Normally if sunlight is directed on the solar cell, and there is no increase in temperature, the absorption energy of each cell will increase per unit area. In a silicon solar cell. however, cell conversion efficiency decreases according to the increasing temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. we design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect effectively thermal energy. We compared performance of new hybrid panel with PV module and thermal panel. We also evaluated conversion efficiency, electric power and thermal capacity and confirmed cooling effect from thermal absorption efficiency.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.500-507
• /
• 1989

본 논문에서는 흡배기 변동압을 실측하여 이것을 계산의 입력수치로 사용 하는 전산프로그램을 개발하여 간단하면서도 정확한 사이클 시뮬레이션이 가능하도록 하여 체적효율을 예측하였다.