• Journal of Korean Biological Nursing Science
• /
• 제21권3호
• /
• pp.178-187
• /
• 2019

Purpose: The purpose of this study was to investigate how college students' perceived stress, cognitive stress, and somatization affect their heart rate variability (HRV). Methods: This study is a cross-sectional survey research on 191 university students, registered at the G University. The perceived stress scale (PSS) and cognitive stress response scale, were used to assess level of stress. The somatization symptom scale of the Symptom Check List 90 (SCL-90), was used to assess level of somatization caused by stress. To assess heart rate variability (HRV), we conducted a five-minute test using a pulse wave analyzer, to analyze short-term HRV. Results: The SCL-90 somatization score had relatively high positive correlation (p< .001) with cognitive stress, but low positive correlation (p< .001) with perceived stress. Cognitive stress response had low negative correlation (p< .001) with 1nSDNN and 1nRMSSD among HRV parameters. Perceived stress was not correlated with HRV. Multiple regression analysis showed that variables of perceived stress, cognitive stress, and somatization symptoms, could not explain HRV. By contrast, one of the HRV indicators, 1nSDNN, was affected by age, gender, and aggressive-hostile thought, the latter being a subscale of the cognitive stress response scale. Conclusion: This study suggests that stress evaluation for people in early adulthood will be more effective, if the evaluation examines cognitive stress and heart rate variability.

• 대한토목학회논문집
• /
• 제28권2C호
• /
• pp.83-94
• /
• 2008

본 연구에서는 흙의 미소변형에서 대변형까지 고려할 수 있는 유효응력해석을 이용하여 매립지반에 대한 액상화 및 진동으로 발생하는 침하량을 예측하였다. 유효응력모델은 진동 중에 발생하는 과잉간극수압을 계산하여 이에 따른 흙의 강성저하와 수반되는 지반의 변위를 모델링하였다. 진동으로 인한 지반의 변형률 수준이 작은 경우에 적합한 등가선형해석을 이용한 액상화 평가를 실시하여 유효응력모델을 이용한 예측법과 비교하였다. 등가선형해석에서 계산된 전단응력비에 해당하는 표준관입시험치를 국내에서 발생 가능한 지진규모와 실트질 함유량에 따라 콘관입저항치로 환산한 값과 현장에서 계측된 콘관입저항치를 서로 비교하여 액상화 가능성을 예측하였다. 두 곳의 인천지역 매립지에 대한 액상화 해석을 위하여 매립지에서 계측된 콘관입저항치와 전단파 속도를 이용하여 입력 물성값을 결정하였다. 인천 매립지에 대한 두 액상화 해석 방법의 결과는 액상화 발생 여부에서 유사하였으며 깊이에 따른 연속적인 액상화 판정과 얇은 층의 액상화 예측이 가능하여 액상화 예측의 정밀도를 높였다. 유효응력모델을 이용한 액상화 해석 결과는 지표면 아래 20m 이내에서 초기 유효수직응력의 40%~70% 정도의 과잉간극수압이 발생하였으며 이로 인하여 지표면에서 10cm 미만의 침하가 발생하였다.

• 지질공학
• /
• 제33권1호
• /
• pp.151-167
• /
• 2023

본 연구는 LNG저장탱크가 설치될 느슨한 포화사질지반을 대상으로 개정된 액상화 평가법과 UBC3D-PLM 모델을 이용한 1차원 유효응력해석에 의한 액상화 평가법을 비교한 것이다. 이를 위해 여러가지 실내 및 현장시험을 실시하여 필요한 Parameter를 산정하였다. 검토결과, 지진응답해석결과와 SPT N 값을 이용하는 개정 액상화 평가법은 액상화 발생 가능성을 높게 평가하였지만, 다양한 액상화 저항인자를 고려할 수 있는 유효응력해석법은 액상화에 다소 안정한 것으로 분석되었다. UBC3D-PLM 모델을 이용한 1차원 유한요소해석을 할 경우 보다 간편하게 액상화 안정성 검토가 가능하였고, 액상화 보강 영역을 최소화 할 수 있었다. 또한, LNG저장탱크의 기초를 고려한 2·3차원 수치해석 시에는 액상화 발생 시 내진설계 및 거동특성을 규명하는 것에 활용될 수 있을 것으로 기대된다.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.435-451
• /
• 2021

Shear lag effect was a significant mechanical behavior of steel-concrete composite beams, and the effective flange width was needed to consider this effect. However, the effective flange width is mostly determined by static load test. The cyclic vehicle loading cases, which is more practical, was not well considered. This paper focuses on the study of shear lag effect of the concrete slab in the negative moment region under fatigue cyclic load. Two specimens of two-span steel-concrete composite beams were tested under fatigue load and static load respectively to compare the differences in the negative moment region. The reinforcement strain in the negative moment region was measured and the stress was also analyzed under different loads. Based on the OpenSees framework, finite element analysis model of steel-concrete composite beam is established, which is used to simulate transverse reinforcement stress distribution as well as the variation trends under fatigue cycles. With the established model, effects of fatigue stress amplitude, flange width to span ratio, concrete slab thickness and shear connector stiffness on the shear lag effect of concrete slab in negative moment area are analyzed, and the effective flange width ratio of concrete slab under different working conditions is calculated. The simulated results of effective flange width are compared with calculated results of the commonly used specifications, and it is found that the methods in the specifications can better estimate the shear lag effect in concrete slab under static load, but the effective flange width in the negative moment zone under fatigue load has a large deviation.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.66-71
• /
• 2003

The release of residual stress by mechanical loading and unloading is often performed in the fabrication of box structure fur steel bridge. The proper degree of loading and unloading is significant at release method of residual stress by mechanical loading because that degree is changed by material and geometric shape of welded structure. Therefore, the simulation model that could exactly analyze the release of residual stress by mechanical loading is to be necessary. In this study, the non-linear behavior of weldments under external loading and unloading, such as the decrease and increase of structure stiffness, was investigated by monitoring of nominal stress and strain. Tensile loading and unloading test and the proper degree of stress relaxation was measured by sectioning technique using strain gauge. Analysis model that is indispensable for the effective application of MSR method was established on the basis of test and measurement result.

• 대한치과의사협회지
• /
• 제25권12호통권223호
• /
• pp.1145-1156
• /
• 1987

The purpose of this experimental study was to analyze the stress distribution from fixed partial dentures to the surrounding structures. This study was carried out on the experimental bridges with K-L blade, F.D.B.I.-11 type, F.D.B.I.-21 type, shape-memory metal blade and two-Apacerams as posterior abutment. The stress patterns and fringes were observed through the circular transmission polariscope. The results of this study were obtained as follows: 1. The stress was more concentrated to the roots apex than the implants. 2. In all blade implants, the stress was more concentrated to the distal side than the mesial side. 3. F.D.B.I.-11 type was more stress concentrated than the 21 type. 4. Shape-memory metal blade was the most effective for stress distribution. 5. Apacerams were more stress concentrated than the blde types and in the model of Apaceram with rubber-ring, anterior root was tipped distally.

• 대한간호학회지
• /
• 제34권2호
• /
• pp.344-351
• /
• 2004

Purpose: The purpose of this study is to identify the effect of aroma inhalation on stress responses (physical symptoms, levels of anxiety, perceived stresses)of nursing students. Method: This study was a quasi-experimental research using anon-equivalent pre-post design and was conducted from June 1 to June 5, 2002. The subjects consisted of 77 junior nursing students who were divided into 39 experimental group members and 38 control group members. A pretest and Post-test were conducted to measure body symptoms, the level of anxiety, and the level of perceived stress. In the experimental group, aromas were given using an aroma lamp, lavender, peppermint, rosemary and Clary-Sage. In the control group, the treatment was not administered. Result: As a result of administering aroma inhalation to nursing students, their physical symptoms decreased, their anxiety scores were low, and their perceived stress scores were low, showing that aroma inhalation could be a very effective stress management method. Conclusion: Nursing educators should play an important role in contributing to college students' physical and psychological health by helping enhance their recognition of stress management and effectively relieving their stress using essential oils.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.721-725
• /
• 1996

The microfabricated test structures were used in order to evaluate the stress characteristics in films. The test structures were fabricated using surface micromachining technique, including HF vapor phase etching as an effective release method. The fabricated structures were micro strain gauge, cantilever-type vernier gauge and bridge for stress measurement, and cantilever for stress gradient measurement. The strain was measures by observing the deformation of the structures occurred after release etching and the amount of deformation can be detected by micro vernier gauge, which has gauge resolution of 0.2${\mu}{\textrm}{m}$. The detection principles and the degree of precision for the measured strain were also discussed. The characteristics of residual stress in LPCVD polysilicon films were studied using these test structures. The stress gradient due to the stress variation through the film thickness was calculated by measuring the deflection at the cantilever free end.

• 대한가정학회지
• /
• 제28권4호
• /
• pp.119-133
• /
• 1990

This study attempts to expore factors which influence of stress. Date were obtained from structed interview conducted with 373 men and women who were 60 years over and living in Kyungnam. Data were analyzed through X2, ANOVA, T-TEST, FACTOR ANALYSIS, MULTIPLE REGRESSTION techniques. The results are summarized as follow: 1. Stress of old age were showed over middle level. The domains of stress showed that health problem is first, later life problem is second, trouble of communication is third, dependency problem is fourth, alienation is last(p<.001). 2. Of the variables health status, family type, economic status, self-esteem, mastery were significant with stress(p<.001). 3. Of the variables sex, religious, self-esteem, mastery were significant of used method in coping with stress. 4. The most of effective variables of stress were mastery, health status, self-esteem.

• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.43-54
• /
• 2006

본 논문은 벤더 엘리먼트를 압밀, 토모그래피, 그리고 액상화에 적용하는 방법을 다루었다. 모래와 점토를 이용하여 압밀 시험을 수행하면서 전단파 속도를 측정하여 하중 재하 및 제하 시기를 평가하였다. 전단파 속도는 유효응력의 함수이므로 전단파 속도를 이용하여 하중 재하시기를 결정할 수 있으나, 침하량 기준과 전단파 속도(유효응력) 메카니즘이 다를 수 있으므로 주의해야 한다. 또한 전단파 속도는 고결화 제어 구간(cemented controlled regime)과 응력 제어 구간(stress controlled regime)으로 구별할 수 있어 응력이력현상을 확인할 수 있다. 벤더 엘리먼트가 설치된 고정된 프레임에서 전단파 토모그래피가 가능하다. 낮은 구속응력상태와 진 삼축 장비 내에서 토모그래피 실험을 수행한 결과 전단파 토모그래피는 평균유효응력과 관련된 전단파 속도 변화의 관측에 사용될 수 있음을 보여 주였다. 한편 액상화와 같은 어떤 현상을 관측하기 위하여 반복 주기가 높은 방식의 전단파 트랜스-일루미네이션(trans-illumination)이 적용되었다. 전단파 속도와 크기의 전개는 액상화 동안 과잉간극수압의 경향과 평행함을 알 수 있었다. 본 논문에서 소개한 적용들은 벤더 엘리먼트가 실내 시험에서 전단파 검측에 상당히 효과적인 방법이 될 수 있음을 보여준다.