• Design & Manufacturing
• /
• 제2권5호
• /
• pp.30-33
• /
• 2008

Injection Molding is the most effective process for mass production of plastic parts. The injection molding process is composed with several steps such as Filling, Packing, Holding, Cooling, Ejecting. Among them, filling and packing process should be considered carefully to improve accuracy of dimension, surface quality of plastic parts. Usually the quality above-mentioned is managed with weight of part after molding on the field. In this paper, a series of experiment for molding automotive front bumper was conducted with cavitity temperature sensor to optimize switch-over time(V-P switching), hot runner vale gate sequence time during filling and packing step for the purpose of uniform quality, weight at every molding. As a result, it was found that it is effective method to use temperature sensor in injection molding for quality control of plastic molding.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.353-356
• /
• 2005

The effect of silkworm hemolymph on the expression of recombinant protein in Escherichia coli was investigated. The addition of silkworm hemolymph to the culture medium in­creased the production of recombinant $\beta$-galactosidase in E. coli. The production was dependent on the concentration of the added silkworm hemolymph, which increased 2-, 5-, and 8-fold in media supplemented with 1, 3, and $5\%$ silkworm hemolymph, respectively. To identify the effective component, the silkworm hemolymph was fractionated by gel filtration column chromatography. A fraction, with a molecular weight of about 30 K was identified as the effective component.

• 한국주거학회논문집
• /
• 제15권4호
• /
• pp.107-115
• /
• 2004

The purpose of this paper is to study on the architectural value in Dom-Ino system. Dom-Ino system by Le Corbusier is a structural system for effective production in terms of physical reproductivity and a modeling system from the view of formal composition. It creates planar grid with a fixed ratio, manipulates the user group, and becomes the basic construction method. Form comes out of geometrical proportion system, and grid-based plan provides regularity and order to elevation planning. Production requires standardization. Indoor space is maintained by uniformed and integrated service facilities. Dom-Ino system was a transitional step of the Modulor system which was created by Le Corbusier in 1945 and composes of and equivalent proportional system. The fact that the numerical proportion system is the one of appropriate design methods implys a progressive concept that architectural configurations are controlled by the technology of that time. And also the system is one of the object type of Corbusier's housing architecture.

• 산업기술연구
• /
• 제21권A호
• /
• pp.337-341
• /
• 2001

This study was carried out to screen the effective polymeric additives preventing wall growth during mycelial submerged cultivation of Ganoderma. lucidum. Effects of additives on mycelial growth and exo-polysaccharide (EPS) production in flask culture and jar fermenter system under 3 different pH processes were investigated, and changes of mycelial morphology were also examined. From flask culture of G. lucidum with additives of different concentrations, 0.1%(w/v) polyacrylic acid was effective for EPS production. As the polyacrylic acid of 0.1%(w/v) was added in medium, wall growth of G. lucidum mycelium grown in jar fermenter system could be protected. The addition of 0.1%(w/v) polyacrylic acid to medium was also improved the mycelial growth and EPS production in the later of submerged culture G. lucidum and no changes of mycelial morphology were observed.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.243-246
• /
• 2002

In this study, biological production of fumaric acid by Rhizopus oryzae KCTC 6946 using rotary biofilm contactor was investigated. In study of neutralizing agent on fumaric acid production, $Na_2CO_3$ was more effective than NaOH. After 24 hr of incubation with a rotating speed of 10 rpm at $35^{\circ}C$, biofilm was grown on and around the surface of the disks. The yield and volumetric productivity of rotary biofilm contactor were 33.8% and 0.595 g/L${\cdot}$h, respectively, with the optimum effective disk surface area of 1,583 $cm^2/L$.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.27-33
• /
• 2011

HCPV(High Concentrated PV) systems have well known for CPV market all over the world. Low concentration type silicon based modules have been introduced in the market. But low cost of standard flat silicon modules made them useless nowadays. High cost of compound semiconductor solar cell reduced cost effective cpv module production than that of recently silicon solar cell. In order to overcome increasing cost of CPV module, we study middle concentration type fresnel lens simulation using concentrated type silicon based solar cell. Linear type fresnel lens made production of CPV module without secondary optics such as light pipe or light tunnel. This type of fresnel lens design makes more cost effective solution for cpv niche market.

• 한국식품영양과학회지
• /
• 제28권1호
• /
• pp.53-60
• /
• 1999

Possibility of utilization of fig as a source of vinegar was tested. Alcohol fermentation was conducted by inoculation of Saccharomyces bayanus into fig juice. After 5 days of fermentation at 27oC, fig wine with alcohol content of 13.6%. Then fig vinegar was produced by cultivation of Acetobacter sp. E which was isolated from fig vinegar. Optimum concentration of alcohol, starter content and fermentation temperature for the acid production were 8~9%, 5% and 27~30oC, respectively. More acetic acid was produced by adding 0.5% of yeast extract and 0.01% of Ca pantothenate. Adjustment pH of culture broth with acetic acid and shaking cultivation method were not effective in higher yield of acid production. Addition of sulfite up to 50 ppm did not inhibit for acetic acid fermentation. Addition of 1% bentonite or 1% kakishibu was more effective for the clarification of fig vinegar than any other clarifying agents tested. During aging and racking, acidity, absorbance and tannin content of fig vinegar decreased, while redness and yellowness increased. Aged and racked fig vinegar showed higher sensory score than non aged one in the aspects of color and overall acceptability.

• 미생물학회지
• /
• 제21권4호
• /
• pp.213-220
• /
• 1983

Conditions for isolation of protoplasts from conidiospores of Trichoderma koningii ATCC 26113 were tested. Maximum production of conidial protoplasts was obtained by preincubation of conidiospores on liquid minimal medium for 8 1/2 hrs. and by reaction with cell wall lytic enzyme for 3 hrs. Among effective cell wall lytic enzymes (Driselase, p-Glucuronidase, Novozyme and Zymolyase), Driselase was the most effective one on the production of conidial protoplasts. The production of conidial protoplasts was also enhanced by addition of 2-Deoxy-D-Glucose $(25{\mu}g/ml)$ into liquid minimal medium. Over 70% of the initial swollen conidia, preincubated in liquid minimal medium supplemented with 2-Deoxy-D-Glucose $(25{\mu}g/ml)$, were converted to protoplasts by incubation with 2% (w/v) commercial lytic enzyme Driselase at $28^{\circ}C$ for 3 hrs. The reversion frequency of the conidial protoplasts was about 30 times (25-50%) higher than that of mycelial protoplasts (0.6-1.3%).

• 산업공학
• /
• 제16권3호
• /
• pp.280-290
• /
• 2003

Many firms are trying to optimize their production and distribution functions separately, but possible savings by this approach may be limited. Nowadays, it is more important to analyze these two functions simultaneously by trading off the costs associated with the whole. In this paper, I treat a production and distribution planning problem for single-period inventory products comprised of a single production facility and multiple customers, with the aim of optimally coordinating important and interrelated decisions of production sequencing and vehicle routing. Then, I propose a hybrid genetic algorithm incorporating several local optimization techniques, HGAP, for integrated production-distribution planning. Computational results on test problems show that HGAP is effective and generates substantial cost savings over Hurter and Buer's decoupled planning approach in which vehicle routing is first developed and a production sequence is consequently derived. Especially, HGAP performs better on the problems where customers are dispersed with multi-item demand than on the problems where customers are divided into several zones based on single-item demand.

• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1208-1215
• /
• 2016

This study suggests efficient production of game with spine tool that is 2D game tool. For this, the researcher studies process and efficiency of game development by focusing on production of a game "Shooting Monster" Version 1 in service of Google Store at present. Production tools in a contents field are sharply changed. In addition, these tools are automatized into new version and efficient product. These tools help manufacturers in increasing quality of contents and time efficiency. Therefore, the researcher examines understanding of development process of existing 2D game and problems in development stage of graphic character, and analyzes production stage of character animation using spine tool, so suggests effective process of production in terms of production. The purpose of this study is to suggest the direction about graphic efficiency of tool by accessing production process to train working-level talented people in 2D mobile game field.