• Journal of Chest Surgery
• /
• v.32 no.7
• /
• pp.637-647
• /
• 1999

Background: Ischemia-reperfusion injury is one of the major contributing causes of early graft failure in lung transplantation. It has been suggested that triiodothyronine (T3) may ameliorate ischemia-reperfusion injury to various organs in vivo and in vitro. Predicting its beneficial effect for ischemic lung injury, we set out to demonstrate it by administering T3 into the in situ canine ischemia-reperfusion model. Material and Method: Sixteen adult mongrel dogs were randomly allocated into group A and B. T3 $(3.6\mug/kg)$ was administered before the initiation of single lung ischemia in group B, whereas the same amount of saline was administered in group A. Ischemia was induced in the left lung by clamping the left hilum for 100 minutes. After reperfusion, various hemodynamic parameters and blood gases were analyzed for 4 hours while intermittently clamping the right hilum in order to allow observation of the injured left lung function. Result: Arterial oxygen partial pressure $(PaO_2)$ decreased 30 minutes after reperfusion and recovered gradually thereafter in both groups. In group B the decrease of $PaO_2$ was less marked than in group A. The recovery of $PaO_2$ was faster in group B than in group A. The differences between the two groups were statistically significant from 30 minutes after reperfusion $(125\pm34$ mmHg and $252\pm44$ mmHg, p<0.05) until the end of the experiment $(178\pm42$mmHg and $330\pm37$ mmHg, p<0.05). The differences in the arterial carbon dioxide pressure, airway pressure and lung compliance showed no statistical significance. The malondialdehyde (MDA) level, measured from the tissue obtained 240 minutes after reperfusion, was lower in group B $(0.40\pm0.04\mu$M) than in group A $(0.53\pm0.05\mu$M, p<0.05). The ATP level of group B $(0.69\pm0.07\mu$M/g) was significantly higher than that of group A $(0.48\pm0.07\mu$M/g, p<0.05). The microscopic exami nation revealed varying degrees of injury such as perivascular neutrophil infiltration, capillary hemorrhage and interstitial congestion. There were no differences in the microscopic findings between the two groups. CONCLUSION T3 has beneficial effects on the ischemic canine lung injury including preservation of oxygenation capacity, less production of lipid peroxidation products and a higher level of tissue ATP. These results suggest that T3 is effective in pulmonary allograft preservation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1761-1768
• /
• 2010

Hypoglycemic effect through activity inhibition of $\alpha$-glucosidase and $\alpha$-amylase was evaluated using leaves of Eleutherococcus senticosu, Eleutherococcus gracilistylus, Eleutherococcus sieboldianus and Eleutherococcus sessiliflorus which belong to Acanthopanax sessiliflorus genus. As a result of measuring $\alpha$-glucosidase activity inhibition, extract of Eleutherococcus gracilistylus showed around 43.38% of activity inhibition compared with acarbose and extract of Eleutherococcus senticosu showed 41.24% inhibitory effect. As a result of measuring $\alpha$-amylase activity inhibition, acarbose showed 73.25% of activity inhibition in 10 mg/mL concentration, and the extract of Eleutherococcus senticosu leaves showed 91.90% higher activity inhibition compared with acarbose. Also, after subjects in a model were induced diabetes with streptozotocin (STZ) intake plant extract from Acanthopanax sessiliflorus for 2 weeks, effect of improving blood glucose level and fat was examined. In all groups with specimen, Eleutherococcus senticosu (T1), Eleutherococcus gracilistylus (T2), Eleutherococcus sieboldianus (T3) and Eleutherococcus sessiliflorus (T4), blood glucose level was significantly decreased compared with that in control group (C). In an experiment of examining changes in fat concentration in blood, total cholesterol content increased in a control group compared with a normal, while in T1, T3 and T4, it decreased significantly compared with the control group. As for HDL-cholesterol, it significantly increased in all diabetes induced groups compared with the normal group, and in T3, it increased the most significantly by 55.61% compared with the control group. In case of LDL-cholesterol, specific difference between the normal group and the control group was not found; however, significant increase was detected in T2 and T3, whereas in T1 and T4, it decreased significantly compared with the control group. As for triglyceride, its concentration increased in the control group like total cholesterol. It decreased 60.16% in T3, 60.80% in T4 and 50.16% in T1 compared with the control group. As a result of measuring the concentration of triglyceride in extracted liver, the control group showed significant increase compared with the normal group, whereas T1 and T2 showed significant decrease compared with the normal group. The above results show that extracts from Acanthopanax sessiliflorus genus are effective for hypoglycemic and improving fat metabolism due to diabetes.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.139-160
• /
• 2011

The purpose of this study is twofold: (i) to develop a teaching and learning plan and practical performance assessment tools for the improvement of teenager-parent communication and relationships as well as explore their effects on the communication in the everyday family life; and (ii) to find the underlying problems of teenager- parent communication through conversation analysis and to provide a improved dialogue model. We provided the experimental group with a performance task of communication training between teenagers and their parents in the real family situation while the control group practiced communication skills in a learning situation. However for both classes, before and after performance tasks were equally provided. The experimental group exhibited a longer conversation time with their parents, better communication skills, and higher degrees of relational satisfaction than the control group. Conversation analysis revealed that the experimental group reduced the use of blocking techniques in the teenager-parent conversations more than the control group, and all so raised the frequency of functional communications more than the control group. In both areas of communication in the experimental group was significantly improved, Most notably, a problem-solving case through no-lose conflict resolution methods was effective, succeeding by 70% in the e experimental group and 43.3% in the control group. Parents use blocking techniques like admonition, lecturing, blaming. sarcastic remarking, ordering and so forth, while teenagers use dispute, avoidance, blaming, and teasing in this order. The communication problems during the conversation process, teenagers' evasive and rebellious way of speaking instigates adverse communication responses from parents, so their conversation tends to unfold as ambiguous evasion opposed to: inquiring or evasion by short answers vs. ordering-preaching, or disputing vs. criticizing-making sarcastic, disputing vs. disputing-teaching, and criticizing vs. criticizing.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.365-375
• /
• 1995

The anemia-inducing strain of Friend virus (FVA) is a murine retrovirus which stimulates the proliferation of erythroid progenitor cells. The progenitor cells synthesized by FVA-stimulation are unable to proceed with differentiation and accumulate in the spleen resulting in splenomegaly in infected mice. Using FVA-inoculated mice as a model, we have investigated the antiretroviral effects of 2',3'-dideoxycytidine (ddC) and recombinant $interferon-{\alpha}-A\;(rIFN-{\alpha}-A)$ on FVA infection. The extent of the infection was determined by measuring the weights of the spleens. Daily intraperitoneal injection of ddC (100 mg/kg body weight), $rIFN-{\alpha}-A$ (10 KU/mose) and the combination of both drugs to FVA inoculated mice for 18 days resulted in suppression of the growth of spleens by 15.1%, 52.7% and 61.6%, respectively. When ddC was dissolved in drinking water (0.1 mg/ml) and administered to a group of FVA inoculated mice ad libitum, and $rIFN-{\alpha}-A$ (10 KU/mouse) was intraperitoneally injected daily to another group of ddC (0.1 mg/ml) drinking mice for 18days, the growth of spleens was suppressed by 38.4% and 83.2%, respectively. These results indicate that administration of ddC via drinking water is more effective in suppressing FVA infection than the daily injection of ddC, and that the combined effects ddC and $rIFN-{\alpha}-A$ are not synergistic but additive. In order to determine whether ddC treatment alters the characteristic of the progenitor cells with respect to $Ca^{++}$ uptake, $Ca^{++}$ uptake in erythroid cells and the effect of cyclohexyladenosine (CHA) on the $Ca^{++}$ uptake were studied. $Ca^{++}$ uptake in the erythroid progenitor cells was about 20-fold greater than in mouse erythrocytes and the inhibition of $Ca^{++}$ uptake by CHA was the greatest in the progenitor cells from FVA infected mice which were treated with ddC. The inhibition was obviated by theophylline. Results of CHA binding studies showed that the erythroid progenitor cells contain both high and low affinity CHA binding sites, whereas mose erythrocytes contain only the low affinity CHA binding sites.

• Analytical Science and Technology
• /
• v.31 no.5
• /
• pp.208-218
• /
• 2018

Autophagy is a cellular process whereby cytosolic materials or organelles are taken up in a double-membrane vesicle structure known as an autophagosome and transported into a lysosome for degradation. Although autophagy has been studied at the genetic, cellular, or biochemical level, systematic ultrastructural quantitative analysis of autophagosomes during the autophagy process by using transmission electron microscopy (TEM) has not yet been reported. In this study, we performed ultrastructural analysis of autophagosomes in wild-type (WT) mouse embryonic fibroblasts (MEFs) and autophagy essential gene (atg5) knockout (KO) MEFs. First, we performed ultrastructural analysis of autophagosomes in WT MEFs compared to atg5 KO MEFs in basal autophagy or starvation-induced autophagy. Although we observed phagopore, early, late autophagosomes, or autolysosomes in WT MEFs, atg5 KO MEFs had immature autophagosomes that showed incomplete closure. Upon starvation, late autophagosomes accumulated in WT MEFs while the number of immature autophagosomes significantly increased in atg5 KO MEF indicating that atg5 plays an important role in the maturation of autophagosomes. Next, we examined autophagosomes in the cell model expressing polyQ-expanded N-terminal fragment of huntingtin. Our TEM analysis indicates that the number of late autophagosomes was significantly increased in the cells expressing the mutant huntingtin, indicating that improving the fusion of autophagosome with lysosome may be effective to enhance autophagy for the treatment of Huntington's disease. Taken together, the results of our study indicate that ultrastructural and quantitative analysis of autophagosomes using TEM can be applied to various human cellular disease models, and that they will provide an important insight for cellular pathogenesis of human diseases associated with autophagy.

• Journal of Distribution Research
• /
• v.6 no.2
• /
• pp.1-17
• /
• 2002

The recent dot-com craze has been one of the main causes that accelerated the growth of internet-related companies in diversity as well as in size. Meanwhile, the domestic market of supplies and equipment for internet businesses has been dominated by major foreign companies. To regain their market positions, the domestic manufacturers had to find the way to build up their competitive advantages, such as meeting their customers needs and reducing overall costs. In this study, one domestic PC server manufacturer, which competes fiercely with foreign manufacturers for the top place, has been chosen as a model to evaluate its current supply chain and to find an area that can be improved for a better performance. System Dynamics is used throughout the study. The central concept to system dynamics is understanding how all the objects in a system interact with one another. It focuses on feedback and secondary effects to think through how a strategy might or might not work, depending on how organizational changes are received, and what kinds of consequences emerge. Then, computerized models were built for simulations, each with different conditions, and, finally, the results were evaluated based on some criteria which are considered to be important and meaningful. The inefficiency that exists in the supply chain was proved to be a thirty-day long purchasing order leadtime, and it was expected that more effective supply chain could be formed if the leadtme were reduced to 14 days or 7 days. The results of simulations showed that the overall expected costs in supply chain was the least with the purchasing leadtime being 7 days. The lower average number of parts held as inventory, along with the reduced lost sales, acted as the factor reducing the expected overall costs. Although there was a slight increase in the average number of final products held as inventory and the total ordering cost, the benefits from lower parts inventory and reduced lost sales were large enough to justify the overall cost reduction.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.37-47
• /
• 2010

CRM refers to the operating activities that always maintain and promote good relationship with customers to ultimately maximize the company's profits by understanding the value of customers to meet their demands, establishing a strategy which may maximize the Life Time Value and successfully operating the business by integrating the customer management processes. In our country, many big businesses are introducing CRM initiatively to use it in marketing strategy however, most medium and small sized companies do not understand CRM clearly or they feel difficult to introduce it due to huge investment needed. This study is intended to present CRM promotion strategy and activities plan fit for the medium and small sized companies by analyzing the success factors of the leading companies those have already executed CRM by surveying the precedents to make the distributors out of the industries have close relation with consumers to overcome their weakness in scale and strengthen their competitiveness in such a rapidly changing and fiercely competing market. There are 5 stages to build CRM such as the recognition of the needs of CRM establishment, the establishment of CRM integrated database, the establishment of customer analysis and marketing strategy through data mining, the practical use of customer analysis through data mining and the implementation of response analysis and close loop process. Through the case study of leading companies, CRM is needed in types of businesses where the companies constantly contact their customers. To meet their needs, they assertively analyze their customer information. Through this, they develop their own CRM programs personalized for their customers to provide high quality service products. For customers helping them make profits, the VIP marketing strategy is conducted to keep the customers from breaking their relationships with the companies. Through continuous management, CRM should be executed. In other words, through customer segmentation, the profitability for the customers should be maximized. The maximization of the profitability for the customers is the key to CRM. These are the success factors of the CRM of the distributors in Korea. Firstly, the top management's will power for CS management is needed. Secondly, the culture across the company should be made to respect the customers. Thirdly, specialized customer management and CRM workers should be trained. Fourthly, CRM behaviors should be developed for the whole staff members. Fifthly, CRM should be carried out through systematic cooperation between related departments. To make use of the case study for CRM, the company should understand the customer and establish customer management programs to set the optimal CRM strategy and continuously pursue it according to a long-term plan. For this, according to collected information and customer data, customers should be segmented and the responsive customer system should be designed according to the differentiated strategy according to the class of the customers. In terms of the future CRM, integrated CRM is essential where the customer information gathers together in one place. As the degree of customers' expectation increases a lot, the effective way to meet the customers' expectation should be pursued. As the IT technology improved rapidly, RFID (Radio Frequency Identification) appears. On a real-time basis, information about products and customers is obtained massively in a very short time. A strategy for successful CRM promotion should be improving the organizations in charge of contacting customers, re-planning the customer management processes and establishing the integrated system with the marketing strategy to keep good relation with the customers according to a long-term plan and a proper method suitable to the market conditions and run a company-wide program. In addition, a CRM program should be continuously improved and complemented to meet the company's characteristics. Especially, a strategy for successful CRM for the medium and small sized distributors should be as follows. First, they should change their existing recognition in CRM and keep in-depth care for the customers. Second, they should benchmark the techniques of CRM from the leading companies and find out success points to use. Third, they should seek some methods best suited for their particular conditions by achieving the ideas combining their own strong points with marketing. Fourth, a CRM model should be developed that will promote relationship with individual customers just like the precedents of small sized businesses in Switzerland through small but noticeable events.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.652-665
• /
• 2016

National Competency Standards or NCS is an educational system that emphasizes developing job-related abilities. Therefore it will be an effective solution in training field-oriented work forces if properly applied. However, in the department of social welfare, it is not easy to apply NCS to the curriculum since most academic subjects concerning social welfare focus not on practice but on theory and in addition, most of social welfare departments in junior colleges have an accredited curriculum for the 2nd degree of the social worker qualification. This means it is preposterous if NCS is applied to the curriculum without prior changes in the existing qualification system. So, this paper proposes a draft model to apply NCS to the already-accredited curriculum for the 2nd degree social workers in the junior colleges and details are as follows. Firstly, the competency units will be customized for the existing academic subjects in the curriculum rather than developing new subjects in accordance with NCS competency units. Secondly, some client-related competency units including children, seniors, the disabled are newly developed and then applied to the curriculum, which are crucial for the career development at the junior college level. Thirdly, the competency units are categorized into three types in accordance with the degree of job relevancy - type 1, type 2, type 3. Fourthly, four out of 11 basic job abilities are selected and then developed into academic subjects. Fifthly, all competency units concerning the main job market are regarded as one virtual competency unit and then arranged in the order of type 1s, type 2s and type 3s and then the scope of their study is adjusted to the job abilities required at the main job market.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.94-99
• /
• 2011

Purpose: As the number of people enjoying skiing and snowboarding which are two popular winter sports has been increasing, wearing helmet during doing these sports has been needed for safety. The rates of head or face injury have decreased after using helmet. However the effect that wearing helmet has on cervical damage is not yet to be known. So through this research we intend to be helpful in developing effective program and safety equipment. Materials and Methods: During two seasons from December 2009 to march 2011, cased 658 cervical injuries within 14538 admittance in medical center of major resort due to skiing and snow-boarding injuries. For survey and research model, one year before the research year conducted a pilot study. Admittance were 432 male and 226 female, advanced 273 and 385 novice. We divided them into two groups depending on wearing helmet, measured cervical damage ratio and injury mechanism, and researched the severity of damage and diagnosed injury. Each group used SPSS 12.0 (SPSS Inc., Chicago, IL, USA) to process data statistically. Results: The number of patients was 312 in skier and 346 in snow boarder. Patients wearing helmet were 146 in skier and 127 in snow boarder. Classification of each injuries were confirmed as 292 cases of simple sprain, 359 bruising, 6 cervical fractures and 1 case of dislocation. Classification of injury mechanisms were 287 of human collision, 212 material collision, 108 of slip down by oneself, 39 of falling and 12 cases of etc. In cases wearing helmet ski 78/ snow board 70 were simple sprain, ski 64/ snowboard 68 were shown as bruising, ski 1/ snow board 2 had cervical fracture or dislocation. The ratio of cervical sprain increased in cases of wearing helmet compared to non-wearing cases and there was a statistical significance (p<0.001). The ratio of cervical contusion increased significantly in non-wearing helmet user (p<0.05). However, there was no significant increase in fracture and dislocation compared between helmet user and non-user (p> 0.05). Conclusion: In this study, wearing helmet had no relation to additional cervical injury occurrence or severity among skiers and snow boarders. The ratio of cervical sprain increased significantly in helmet user with person to person accident. However, the cervical contusion decreased. On this ground, further biomechanical studies are required and modified helmet will be necessary.