• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.47-54
• /
• 2007

The safety management of the small sized enterprise is very important to decrease industrial disaster in the area of industry. On this research, to give the effective measures to decrease industrial disaster, we administered the workplaces in Kyunggi area to search actual condition of industrial disaster and to disclose a link between industrial and industrial safety management. The results show industrial accident characteristics of small sized enterprises in Kyunggi area. So it is shows that we need to put in effective safety political measures to small sized enterprises.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.35-39
• /
• 1998

Determination of effective EDM parameters is significant to increase productivity. However, With the complexity of EDM phenomena, a universal selection method of EDM parameters has not been established yet. Moreover, No attempt has been tried before to suggest a logical method in determining essential machining parameters for effective electrical discharge machining. Peak current, one of the most significant factors in EDM, is proportional to EDM area. This paper presents a method that can be Z-map modeling from CMM data, and calculate EDM area using Z-map.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.289-290
• /
• 2010

• Journal of radiological science and technology
• /
• v.44 no.1
• /
• pp.53-58
• /
• 2021

Kerma Area Product (KAP) is best indicator of radiation monitoring on radiographic examinations. KAP can be measured differently depending on the X-ray irradiation area, air kerma, souce-skin distance, type of equipment, etc. The major factors are exposure area and the air krema. The KAP currently used only considers the exposure area with X-rays and has a problem that KAP is always excessively overestimated from the dose received by an actual subject. Therefore, in this study, in order to measure the accurate KAP, a new area dose calculation that can be calculated by dividing the area where the actual X-ray is irradiated is presented, and the KAP is the real area. We compared and analyzed how much it was overestimated compared to the dose. The Skull AP projection and seven other projection were compared and analyzed, and the KAP was overestimated in each test by 52% to 60%. In this way, the effective KAP (EKAP) calculation developed through this study should be utilized to prevent extra calculation of the existing KAP, and only the accurate patient subject area should be calculated to derive the accurate area dose value. EKAP is helpful for control the patient's exposure dose more finely, and it is useful for the quality control of medical radiation exposure.

• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.93-102
• /
• 2007

Purpose: Cone beam computed tomography (CBCT) provides a lower dose and cost alternative to conventional CT, promising to revolutionize the practice of oral and maxillofacial radiology. The purpose of this study was to evaluate the absorbed and effective doses of Implagraphy and VCT (Vatech Co., Hwasung, Korea) and compare them with those of panoramic radiography. Materials and Methods: Thermoluminescent dosimeter (TLD) chips were placed at 27 sites throughout the layers of Female ART Head and Neck Phantom for dosimetry. Implagraphy, VCT units, and Planmeca Proline XC panoramic unit were used for radiation exposures. Radiation weighted doses and effective doses were measured and calculated using 1990 and 2005 ICRP tissue weighting factors. Results: Effective doses in Sv (ICRP 2005, ICRP 1990) were 90.19, 61.62 for Implagraphy at maxillay molar area, 123.20, 90.02 for Implagraphy at mandibular molar area, 183.55, 139.26 for VCT and 40.92, 27.16 for panoramic radiography. Conclusion: Effective doses for VCT and Implagraphy were only about 2.2 to 4.5 times greater than those for panoramic radiography. VCT and Implagraphy, CBCT machines recently developed in Korea, showed moderately low effective doses.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.112-121
• /
• 2007

Grain filling is a crucial factor that determines grain yield in crops since it is the final process directly associated with crops' yield performance. Grain filling process can be characterized by the interaction of rate and duration of grain filling. This study was conducted, using 16 temperate japonica rice genotypes, with aims to (1) seek variations in grain filling duration and rate on area basis, (2) compare the contribution of grain filling duration and rate to grain yield, and (3) examine the influence of temperature and solar radiation for effective grain filling on grain yield in relation to grain filling duration and rate. Grain filling rate and duration exhibited highly significant variations in the ranges of $20.7{\sim}46.3\;g\;m^{-2}d^{-1}\;and\;11.2{\sim}35.5$ days, respectively, depending on rice genotypes. Grain yield on unit area basis was associated positively with grain filling duration but negatively with grain filling rate. Grain filling rate and duration were negatively correlated with each other. Final grain weight increased linearly with the rise in both cumulative mean temperature and cumulative solar radiation for effective grain filling. Higher cumulative mean temperature and cumulative solar radiation for effective grain filling were the results of longer grain filling duration, but not necessarily higher daily mean temperature and daily solar radiation for effective grain filling. Grain filling rate demonstrated an increasing tendency with the rise in daily mean temperature for effective grain filling but their relationship was not obviously clear. It was concluded that grain filling duration, which influenced cumulative mean temperature and cumulative solar radiation for effective grain filling, was the main factor that determined grain yield on unit area basis in temperate Japonica rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.270-270
• /
• 2017

Brown rice flour (BRF) was treated with different carbohydrases (Viscozyme, Termamyl, Celluclast, AMG, Ultraflo, and Pentopan), and then aqueous alcoholic extracts (70% ethanol) from the treated RBF were examined for their phenolic compositions and antioxidant activities (ABTS and DPPH radical scavenging activity). All the carbohydrases tested induced significant increases in ABTS radical scavenging activity (2.1-3.0 times). Moreover, These enzymes increased the amount of extractable free phenolic acids by 10-15 times, especially for ferulic and p-coumaric acid. Among the enzymes tested, Pentopan which was active in arabinoxylan hydrolysis appeared to be most effective in increasing the free phenolic acid content and ABTS radical scavenging activity than other enzymes. Enzymatic hydrolysis of cell wall polysaccharides in BRF could be used as an effective procedure for raising the amount of extractable phenolic acids and thus increasing the antioxidant activity of BRF extract.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2019

The decrease in population of school age is one of major influencing factor of transformative educational environment. After the nineteen eighties, the population of South Korea has increased step by step, but the population of school age has been decreasing rapidly by low birth rate. As a result, closed school by merger and abolition of small school occurred all over the country. The closed school needed effective function as center of local community. Consequently the purpose of this study is to provide basic data for effective policy making of closed school by comparative analysis of educational environment such as number of students, schools, students per class, status of usage of closed school of the east area and the west area divided by The Tae Baek Mountains in the Gangwon-do, which has the least students in the nationwide. The results of this study are summarized as follows: 1) Gangwon-do has high decreasing rate of population, schools and students compared with other provinces. However it has significantly low number of students per class. 2) The number of students, schools of the west area in Gangwon-do outnumbers that of the east area. However the number of students per class of the east area in Gangwon-do lesser than that of the west area.

• Journal of Fashion Business
• /
• v.6 no.4
• /
• pp.17-31
• /
• 2002

This study is, to the special company with corporate brand, to investigate the effect of its reputation, credibility and the similarity of business area on consumer's attitude toward its clothing products. It is another topic of the study to reveal statistical significance in comsumer's attitude when naming new product with two different brand strategy. The major findings of this study can be summarized as follows. First, there was positive relationship between corporate reputation and consumer's attitude toward new brand and also between corporate credibility and consumer's that. Second, corporate credibility is proven to be grown in proportion to company's reputation. In other words, a corporate credibility is grown with a corporate reputation. Third, the influence of similarity or fitness of business area has a positive effect on a attitude toward new brand. The case of use the new brand name, the variable had low effect on attitude toward new brand, comparing to the case of use the existing brand name but seems to be statistically significant. Fourth, comparing to the inclination toward company's product based on brand name, strategy of supporting brand extension is more effective than that of new brand name on evaluating company's reputation, credibility and the similarity of business area. Fifth, the similarity of business area and the interaction of brand name on the basis of the strategy of use the existing brand name(;brand extension strategy) and new one have significant effect on the inclination to a brand. When participating a new business, it is more effective that a company is extending its business where the similarity of business area is growing. For the case of low similarity, the brand-new strategy is proven to be effective.

• Archives of design research
• /
• v.13 no.1
• /
• pp.199-207
• /
• 2000

The planning of large department store is differ from designing other spaces because it holds items to sell. To make effective selling area, those items are to be showed enough to attract potential customers. In well planned space, customers would enjoy shopping convenientiy and comfortably. There are some requirements to make those kind of space. First, the design must consider customers needs. Second. the design must show items own values effectively. And third is identity of the store. At this point entrance or lobby area would possibly take major role to imprint identity and store concept. The purpose of study is to make well planned lobby area in order to lead customers traffic patterns to effective selling spaces. The method of this study is establishing hypothesis about interior and exterior aspects which effect to traffic patterns. And build condition that helps testing the hypothesis. Through the processes mentioned above, we would possibly reach the result like, First, It is important to reserve enough lobby space to prevent oversizing of selling space and advise effective traffic patterns. Second, Organize the aspects that could cause the change of customers traffic patterns and bring those customers selling point. Third, Make useful context which can attract customers passing by.