• 제목/요약/키워드: Effect sizes

검색결과 1,730건 처리시간 0.027초

수학영재프로그램이 창의성 향상에 미치는 효과 메타분석 (Meta-analysis of the Effects of Gifted-mathematics programs on Creativity Improvement)

  • 조윤희;고호경
    • 과학교육연구지
    • /
    • 제41권3호
    • /
    • pp.499-518
    • /
    • 2017
  • 본 연구는 수학영재프로그램이 창의성 신장에 미치는 효과를 연구한 논문에 대한 메타분석연구이다. 이 연구의 목적은 수학영재교육이 영재아의 창의성 신장에 미치는 효과성을 밝히는데 있다. 연구 결과, 수학영재프로그램이 수학영재아의 창의성 향상에 미치는 전체 효과 크기는 .66으로 나타났으며, 이는 실험집단의 평균점(중간점)이 통제집단 내에서 75% 정도에 위치하는 효과이다. 둘째, 수학영재프로그램이 창의성의 하위 요소에 미치는 효과크기는 유창성이 .76, 융통성이 .60, 독창성이 .50, 수학적 사고능력이 .50으로 나타났다. 셋째, 수학영재프로그램이 미치는 초등영재의 효과크기는 .685로 중등영재의 효과크기 .457보다 높게 나타났다. 또한 창의적 문제해결력의 관계를 중재하는 수학영재프로그램의 프로그램 모형 변인으로 효과 크기를 계산하면 문제해결학습과 탐구학습모형이 높게 나타났다.

Scale Effect를 고려한 기초의 지지력 및 침하량 산정을 위한 모형실험 (Model Tests on the Bearing Capacity and Settlement of Footing Considering Scale Effect)

  • 정형식;김도열;김정호
    • 한국지반공학회논문집
    • /
    • 제19권5호
    • /
    • pp.343-354
    • /
    • 2003
  • 재하판과 실제기초의 크기가 상이하므로 평판재하시험으로부터 실제 기초지반의 지지력 및 침하량을 산정할 때, Scale Effect가 고려되어야 한다. 본 논문에서는 5종류의 모형기초지반을 형성하고, 크기가 각각 l0cm, 15cm, 20cm, 25cm인 4가지 크기의 정사각형 평판으로 재하시험을 실시하여 재하판의 크기에 따른 지지력 및 침하 특성을 분석하였다. 또한 분석된 결과를 토대로 하여, 평판재하시험으로부터 실제기초의 지지력 및 침하량을 산정할 때, 모래와 점토의 혼합비율에 따라 Scale Effect를 합리적으로 고려할 수 있도록 식을 제안하였으며, 식에서 지지력 산정계수(a,b)와 침하량 산정계수(c,d)는 모래와 점토의 혼합비율에 따라 구할 수 있도록 그림으로 제시하였다. 지금까지는 현장기초지반에 대한 지지력 및 침하량을 합리적으로 평가할 수 없어 비경제적인 시공이 되어왔으나, 본 연구에서 제안한 지지력 및 침하량 산정방법에서는 모래와 점토의 혼합비율을 고려하여 기초지반의 지지력 및 침하량을 보다 합리적으로 추정할 수 있으므로 기초지반의 안정성 여부에 대한 확신과, 또한 경제적인 시공이 가능할 것으로 판단된다.

범주형 반복측정자료를 위한 일반화 추정방정식의 소표본 특성 (Small Sample Characteristics of Generalized Estimating Equations for Categorical Repeated Measurements)

  • 김동욱;김재직
    • 응용통계연구
    • /
    • 제15권2호
    • /
    • pp.297-310
    • /
    • 2002
  • Liang과 Zeger는 이산형 혹은 연속형 반복측정자료를 분석하기 위한 일반화 추정방정식 (GEE)을 제안하였다 GEE모형은 범주형 반복측정자료의 모형으로 확장될 수 있으며, 이 GEE추정량은 대표본인 경우 다변량 정규분포를 따른다. 그러나 GEE는 대표본근사이론에 기초한다. 본 논문에서는 소표본인 경우 반복 측정된 순서자료에 대한 GEE추정량의 성질을 연구한다. 우리는 두가지 방법을 사용하여 두그룹의 반복 측정된 순서자료를 생성하며 모의실험을 통하여 소표본인 경우 여러 개 범주를 갖는 순서반응 자료에 대하여 GEE추정량의 1종 오류율, 검정력, 상대효율, 두 그룹의 표본크기가 다를 경우 효과, 그리고 분산 추정량의 성질등을 연구한다.

Latex 입경과 원지 평량 및 칼라농도가 도공지의 인쇄품질에 미치는 영향 (Effect of Latex Particle Size, Base Paper Grammage and Coating Color Concentration on Printing Quality of Coated Paper)

  • 이용규;유성종;조병욱;김용식;남병기;최상민
    • 펄프종이기술
    • /
    • 제39권4호
    • /
    • pp.29-37
    • /
    • 2007
  • The effects of latex particle size, basis weight of base paper and coating color concentration on the printing quality of coated paper were investigated. Coating colors were prepared with five types of latexes having different particle sizes. Coated papers were produced with high solid coating colors and with low solid coating colors in a industrial coater, respectively. In high solid coating colors, rheology modifier was used and GCC content was high. It was concluded that, in order to control binder migration and hence print mottle, latex particle sizes shall be controlled as well as formation, sizing degree and roughness of basis paper.

Characterization of the PAC Modified Cationic Rosin Size and its Sizing Effect

  • Yan, Yong-Xiang;Chandranupap, Fu-Shan;Wang, Gao-Sheng
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
    • /
    • pp.387-390
    • /
    • 2006
  • Cationic rosin sizes are prepared by premixing extremely pure ployaluminum chloride (PAC) and dispersed rosin size (DRS). It turned out that zeta potential and particle size of the sizing agents took a big change by Plus90 analyzer's and FTIR analyzer's analysis. It turned out that -C=O and -COOH of the DRS have both chemical reaction with PAC to form the muti-hydroxyl aluminum rosin acid and that the cationic rosin sizes modified by PAC has dissymmetric and symmetric flexible vibration two absorbing peaks of the groups (its absorbing peaks $at1596cm^{-1}\;and\;1425cm^{-1}$). By DRS reacting with PAC, zeta potential of the resin size varied from negative to cationic. $Al_{2}O_{3}/rosin=1:0.3$, zeta potential of premixed admixture is tiptop28.8mv, When joined continuously PAC, zeta potential of cationic rosin sizes descend on the contrary.

  • PDF

평판형(平板形) 태양열집열기(太陽熱集熱器)의 최적(最適)하니콤 크기에 관(關)한 연구(硏究) (An Experimental Study on Optimum Honeycomb Sizes of a Flat-Plate Solar Collector)

  • 김태진;김종보
    • 태양에너지
    • /
    • 제8권2호
    • /
    • pp.3-11
    • /
    • 1988
  • To suppress the natural convection within enclosure spacing it has been shown theoretically and experimentally that the introduction of cell walls will effectively raise the critical Rayleigh number by providing more shear surfaces within the fluid. For a solar collector, a useful solar thermal converter requires effective control of heat losses. It has been reported that the natural convection can be suppressed and the heat performances of the solar collector increased by placing thin, poorly conducting material honeycomb between the absorber plate and the coverglass. The heat performances were measured and compared directly throughout the simultaneous installation of two solar collectors, one with honeycomb structures fabricated from thin poly carbonate sheet and the other without honeycomb structures. Various tilt angles of 30, 45 and 60 deg. from the horizontal and the honeycomb sizes ($W{\times}H$) of $10{\times}10,\;10{\times}20$ and $10{\times}40mm$ were utilized in the present investigation. It is found that the larger the tilt angle are, the greater the heat losses are, and that the smaller the honeycomb size is, the larger suppression effect of heat losses are. Especially, at tilt angles of 30 degree, the heat use ratio of solar collector with the honeycomb sizes of $10{\times}10mm$ improved approximately 29.5% more than that without honeycomb structures.

  • PDF

DEVELOPMENT OF INTERFACIAL AREA TRANSPORT EQUATION

  • ISHII MAMORU;KIM SEUNGJIN;KELLY JOSEPH
    • Nuclear Engineering and Technology
    • /
    • 제37권6호
    • /
    • pp.525-536
    • /
    • 2005
  • The interfacial area transport equation dynamically models the changes in interfacial structures along the flow field by mechanistically modeling the creation and destruction of dispersed phase. Hence, when employed in the numerical thermal-hydraulic system analysis codes, it eliminates artificial bifurcations stemming from the use of the static flow regime transition criteria. Accounting for the substantial differences in the transport mechanism for various sizes of bubbles, the transport equation is formulated for two characteristic groups of bubbles. The group 1 equation describes the transport of small-dispersed bubbles, whereas the group 2 equation describes the transport of large cap, slug or chum-turbulent bubbles. To evaluate the feasibility and reliability of interfacial area transport equation available at present, it is benchmarked by an extensive database established in various two-phase flow configurations spanning from bubbly to chum-turbulent flow regimes. The geometrical effect in interfacial area transport is examined by the data acquired in vertical fir-water two-phase flow through round pipes of various sizes and a confined flow duct, and by those acquired In vertical co-current downward air-water two-phase flow through round pipes of two different sizes.

기성복 셔츠의 부위별 선호 핏에 영향을 미치는 신체 특성 분석 -20대 여성을 중심으로- (Study of Body Sizes Affecting to Shirt Fit Preference -Focusing on Women in their Twenties-)

  • 강여선
    • 한국의류학회지
    • /
    • 제43권1호
    • /
    • pp.51-64
    • /
    • 2019
  • This study provides basic information for the convenient size selection of shirts in the online purchasing environment. The preferred shirt fit was compared according to body size group. The subjects were 111 students majoring in clothing. After setting a virtual model with her own body sizes, subjects chose the best preferred fit among four sizes shirts which included the shirt suitable to her bust circumference, one size smaller shirt, one size larger shirt, and a two size larger shirt. They generally preferred the original size, but the preferred shirt fit was different by the body characteristics such as stature, waist height, or the ratio of Biacromion and drop. Shirt length was affected by stature and sleeve length was affected by waist height. The shoulder ease was mostly affected by the ratio of the shoulder length. Waist fit and hip fit were influenced by waist and hip. Therefore, the body parts affecting the preferred fit of each shirt part were different and the effect of body shape was stronger than body size.

긍정심리 집단프로그램의 효과성에 관한 메타분석연구 (A Meta-Analysis on the Effect of Positive Psychology Group Program)

  • 박정임
    • 한국콘텐츠학회논문지
    • /
    • 제15권10호
    • /
    • pp.205-213
    • /
    • 2015
  • 본 연구에서는 최근 국내에서 확산되고 있는 긍정심리학에 기반한 긍정심리 집단프로그램의 효과크기를 통합하여 제시하고, 효과적인 긍정심리 집단프로그램의 실천전략을 제시하기 위하여 메타분석을 실시하였다. 자료 수집은 2015년 6월까지 국내에서 발표된 석 박사 학위논문 및 학술지에 게재된 논문 중 메타분석의 대상선정기준에 따라 최종 26편의 논문을 선정하여 분석하였다. 메타분석을 위해서는 CMA(Comprehensive Meta-Analysis) software 2.0을 사용하였다. 연구의 주요 결과는 다음과 같다. 첫째, 긍정심리 집단프로그램의 평균효과크기를 살펴보면, 행복의 효과크기가 2.078로 가장 높게 나타났고, 심리적 안녕감이 1.847, 긍정정서가 1.645, 삶의 만족이 1.407, 자아존중감이 1.289, 우울이 -1.208인 것으로 나타나서 6가지 종속변수 모두 큰 효과크기를 보였다. 둘째, 긍정심리 집단프로그램의 효과크기가 조절변수에 따라 어떻게 차이가 나는지 살펴보았다. 통계적으로 유의미한 조절변수는 심리적 안녕감과 우울의 경우에 '연령'으로 나타났다. 본 연구결과를 바탕으로 긍정심리 집단프로그램의 함의와 실천적 전략을 제언하였다.

사서의 직무만족도에 관한 메타분석 연구 (A Meta-Analysis of Librarians' Job Satisfaction Studies)

  • 노정순
    • 정보관리학회지
    • /
    • 제25권3호
    • /
    • pp.273-296
    • /
    • 2008
  • 본 연구는 선행연구의 연구결과를 데이터로 간주하여 통계분석하는 메타분석방법을 사용하여 사서의 직무만족에 영향을 미치는 요인을 연구하였다. 선행연구 27편으로부터 집단변수로는 남녀성별과 결혼유무, 종속변수로는 전체직무만족도와 7개 하위변수(직무자체, 급여, 승진, 감독, 근무환경, 사회적 인식, 자아실현)가 선정되어 분석되었다. 분석결과 남녀간 사회적 인식과, 승진, 감독, 근무환경의 효과크기는 유의한 차이를 보였으나, 감독과 근무환경의 효과크기만 동질적인 것으로 분석되었다. 이질적으로 분석된 사회적 인식과 승진에 대해서는 랜덤효과분석을 추가로 수행한 결과 승진의 효과크기만 유의한 차이를 보였다. 결혼여부에서는 직무자체와 급여, 자아실현의 효과크기가 유의한 차이를 보였으나, 이질적으로 판명된 직무자체의 효과크기는 랜덤효과분석에서 유의한 차이를 보이지 못하였다. 연구시기 (2000년전후)는 중재변수가 되지 못한 것으로 분석되었다.