• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.385-404
• /
• 2020

Since the scaffold is composed of modular members, the total height of multi-story scaffolds does not often meet with the headroom of construction buildings. At this time, other supporting members need to be set up on the top of scaffolds. However, the mechanical behaviors of the combined system of scaffolds and other supporting members have seldom been discussed. This study explores the stability of the combined system of scaffolds and shores. The loading tests conducted in the laboratory show that the critical load of the combined system of two-story scaffolds and wooden shores is about half that of the three-story scaffold system with the same height. In the failure of both the "scaffold system" and the "combined system of scaffolds and shores' after loading, the deformation mainly occurs in the in-plane direction of the scaffold. The outdoor loading test shows that no failure occurs on any members when the combined system fails. Instead, the whole system buckles and then collapses. In addition, the top formwork of the combined system can achieve the effect of lateral support reinforcement with small lateral support forces in the outdoor loading test. This study proposes the preliminary design guidelines for the scaffolding structural design.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.575-578
• /
• 2016

The thermal endurance of fiber Bragg gratings (FBGs), written with the aid of 193-nm ArF excimer laser irradiation on H₂-loaded Ge/B codoped silica fiber, and pretreated with a CO₂ laser and a subsequent slow cooling process, is investigated. These treated gratings show relatively less degradation of grating strength during the thermal annealing procedure. The thermal decay characteristics of treated and untreated fiber, recorded over a time period of 9 hours, have been compared. The effect on the Bragg transmission depth (BTD) and the center-wavelength shift, as well as the growth of refractive-index change during the grating inscription process for both treated and untreated fiber, are analyzed.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2026-2033
• /
• 2019

Fluidelastic instability of a tube array is a key factor of the security of a nuclear power plant. An unsteady model of the fluidelastic instability of a tube array subjected to two-phase flow was developed to analyze the fluidelastic instability of tube bundles in two-phase flow. Based on this model, a computational program was written to calculate the eigenvalue and the critical velocity of the fluidelastic instability. The unsteady model and the program were verified by comparing with the experimental results reported previously. The influences of void fraction and the tube's material properties on the critical velocity were investigated. Numerical results showed that, with increasing the void fraction of the two-phase flow, the tube array becomes more stable. The results indicate that the critical velocities of the tube array made of stainless are much higher than those of the other two tube arrays within void fraction ranging from 20% to 80%.

• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.131-135
• /
• 2003

Callus and cell suspension cultures of Eurycoma longifolia Jack were initiated from leaves of different trees. The leaf explant of tree Eu9 produced the most calli and also induced high cell biomass in the cell suspension culture. Optimum production of cell biomass could be initiated in proliferating culture medium with a pH of 5.75 prior to autoclaving. The effects of macronutrient inorganic salts of Murashige and Skoog (MS) liquid medium supplemented with X on production of cell biomass of Eurycoma longifolia were also investigated. The highest cell biomass was produced in MS medium containing macronutrients of $21\;mM\;NH_4NO_3,\;12.25\;mM\;KNO_3,\;3.00\;mM\;CaCl_2.2H_2O,\;0.575\;mM\;MgSO_4.7H_2O$, and $1.83\;mM\;KH_2PO_4$. A new medium labeled as TAM was formulated for the production of Eurycoma longifolia cell biomass in the cell suspension culture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.732-737
• /
• 2008

This study developed a natural ingredient as a functional food possessing properties of attenuation of hypertension and cardiovascular hypertrophy. In a previous study hydrolysates obtained from chicken leg bone protein using Alcalase strongly inhibited angiotensin I converting enzyme (ACE) in vitro. In particular, hydrolysate (A4H) from four hours of incubation exhibited the highest ACE inhibitory activity (IC50 = 0.545 mg/ml). A4H was selected as a potent ACE inhibitor and orally administrated to spontaneously hypertensive rats (SHR) for eight weeks to investigate attenuating effects on age-related development of hypertension and cardiovascular hypertrophy. Results showed that treatment with A4H of SHRs attenuated the development of hypertension as effectively as the clinical antihypertensive drug captopril. Moreover, a significantly lower heart to body weight ratio and thinness of coronary arterial wall was observed in SHRs that had been treated with A4H or captopril. The results suggest that A4H can be utilized in developing an ACE inhibitor as a potential ingredient of functional foods to alleviate hypertension and cardiovascular hypertrophy.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.4
• /
• pp.239-246
• /
• 2012

Pervious concrete is a tailored-property concrete with high water permeability which allow the passage of water to flow through easily through the existing interconnected large pore structure. This paper reports the results of an experimental investigation into the development of pervious concrete with reduced cement content and recycled concrete aggregate for sustainable permeable pavement construction. High fineness ground granulated blast furnace slag was used to replace up to 70 % cement by weight. The properties of the pervious concrete were evaluated by determining the compressive strength at 7 and 28 days, void content and water permeability under falling head. The compressive strength of pervious concrete increased with a reduction in the maximum aggregate size from 20 to 13 mm. The relationship between 28-day compressive strength and porosity for pervious concrete was adversely affected by the use of recycled concrete aggregate instead of natural aggregate. However, the binder materials type, age, aggregate size and test specimen shape had marginal effect on the strength-porosity relationship. The results also showed that the water permeability of pervious concrete is primarily influenced by the porosity and not affected by the use of recycled concrete aggregate in place of natural aggregate. The empirical inter-relationships developed among porosity, compressive strength and water permeability could be used in the mix design of pervious concrete with either natural or recycled concrete aggregates to meet the specification requirements of compressive strength and water permeability.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.139-140
• /
• 2006

Some of novel halogen-free, elastomeric flame retardants for nylon-6 have been developed. It is found that the S-ENP and clay have a synergistic flame retardant effect on nylon-6 resulted from the formation of two barriers on the nanocomposite residue surface at the end of combustion. A novel flame retardant ternary nanocomposite of nylon-6/ENP/nano-Magnesium hydroxide was also fabricated. The new ternary composite has better flame retardancy and thermal stability than the conventional one because nano-MH can disperse much more homogeneous in the new ternary composite than in the conventional one.

• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.459-474
• /
• 2019

This study develops a novel recursive algorithm to significantly enhance the computation efficiency of a recently proposed stochastic subspace identification (SSI) methodology based on an alternative stabilization diagram. Exemplified by the measurements taken from the two investigated office buildings, it is first demonstrated that merely one sixth of computation time and one fifth of computer memory are required with the new recursive algorithm. Such a progress would enable the realization of on-line and almost real-time monitoring for these two steel framed structures. This recursive SSI algorithm is further applied to analyze 20 months of monitoring data and comprehensively assess the environmental effects. It is certified that the root-mean-square (RMS) response can be utilized as an excellent index to represent most of the environmental effects and its variation strongly correlates with that of the modal frequency. More detailed examination by comparing the monthly correlation coefficient discloses that larger variations in modal frequency induced by greater RMS responses would typically lead to a higher correlation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2016

Heat stress is an agricultural problem for Gerbera jamesonii, and it often causes poor seedling growth, reduced flower yield and undesirable ornamental characteristics of flowers. However, little is known about the effect of heat stress on the morphological, physiological and biochemical characteristics of gerbera plants. Here, the responses of six cultivars of Gerbera jamesonii to heat stress were investigated. Under a 1-d heat treatment at $45^{\circ}C$, the leaves of gerbera cultivars showed yellowing, wilting, drying and death to varying degrees. The heat treatment also resulted in increased electrical conductivity, decreased soluble protein and chlorophyll contents, and the accumulation of malondialdehyde (MDA) and proline in leaves. Moreover, heat tolerance differed among the six tested gerbera cultivars. Our results demonstrated that among the six gerbera cultivars, 'Meihongheixin' is a heat-resistant cultivar, whereas 'Beijixing' is a heat-sensitive one. 'Shijihong' and 'Linglong' are relatively heat-resistant cultivars, and 'Dadifen' and 'Taiyangfengbao' are relatively heat sensitive.