• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.112-114
• /
• 1995

We show physically and mathematically that magnetoelastic coupling coefficients can be predicted to have a form of $B^{eff}=B^{b}+B^{s}/t$, sirniiarily in effective magnetic anisotropy energy in ultrathin films. The inverse thickness dependnce of magnetoelastic coupling coefficients implies lots of technical potentials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.524-529
• /
• 2008

In this paper, in order to develop low loss multilayer actuator, piezoelectric properties of PZW-PMN-PZT multilayer actuator sintered at $900^{\circ}C$ low temperature were investigated according to the number of multilayer. The multilayer actuator was fabricated using tape casting method and used pure Ag internal electrode. The density above $8.0\;g/cm^3$ was obtained at all specimens. With increasing number of multilayer, effective electromechanical coupling factor($k_{eff}$) was increased. $k_{eff}$ of multilayer actuator shows the maximum value of 0.283 at 11 layers actuator. However, effective mechanical quality factor(Qm') was decreased according to the increase of number of multilayer. The Qm' of multilayer actuator showed the maximum value of 920 at 5 layers actuator.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.51-54
• /
• 1996

This paper reports the studies of the inversion layer mobility in p-channel Si MOSFET's under hot-carrier degradated condition. The validity of relationship of hot carrier degradations between the surface effective mobility and field effect mobility and are examined. The effective mobility(${\mu}$$\_$eff/) is derived from the channel conductances, while the field-effect mobility(${\mu}$$\_$FE/) is obtained from the transconductance. The characteristics of mobility curves can be divided into the 3 parts of curves. It was reported that the mobility degradation is due to phonon scattering, coulombic scattering and surface roughness. We are measured the mobility slope in curves with DC-stress [V$\_$g/=-3.1v]. It was found that the mobility(${\mu}$$\_$eff/ and ${\mu}$$\_$FE/) of p-MOSFET's was increased by increasing stress time and decreasing channel length. Because of the increasing stress time and increasing V$\_$g/ is changed oxide reliability and increased vertical field.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1198-1203
• /
• 2000

AlN와 Si을 이용하여 체적 탄성파 over-moded 공진기를 형성하였다. 높은 c-축 배향성을 갖는 AlN 압전박막은 sputtering에 의해 저온에서 증착하였다. AlN 박막의 c-축 배향성은 기판과 타겥의 거리가 가까울수록, 증착 압력이 낮을수록 (002) 면으로의 성장이 촉진되었다. Si 기판을 이용한 over-moded 공진기로부터 TFR의 임피던스를 산출한 결과 공진영역의 면적에 가장 의존하였다. Al/AlN/Al로 이루어진 TFR의 입력 임피던스는 공진 영역이 크기가 200㎛×200㎛인 경우 가장 50Ω에 근접하였다. Over-moded 공진 특성은 Si 기판의 낮은 Q로 인해 mode 수 294인 2.60976 GHz에서 0.109%의 유효 전기기계결합계수(K/sub eff/²)와 0.3의 K/sub eff/²·Q값을 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.349-352
• /
• 1996

When the ideality factor of collector current of AIGaAs/GaAs Heterojunction Bipolar Transistors (HBTs) is larger than unity, conventional $I_{CO}$ / $T^2$ versus 1000/T plot used in the determination of the barrier height of base-emitter junction of HBT was deviated from the straight line. We introduced the effective temperature $T_{eff}$ as nT in the Thermionic-emission equation. The modified $I_{CO}$ /TB versus 1000/ $T_{eff}$ plot was on the straight line in the temperature range considered. The activation energy obtained from the modified plot is 1.61 eV. The conduction band discontinuity calculated using this value was 0.305 eV and this value is coincident with the generally accepted value of 0.3 eV. eV.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.752-760
• /
• 1991

The computer aided analysis is performed to investigate the influence of physical parameters (thickness and doping concentration, etc.) in the window, emitter, base on the efficiency characteristics of a uniformly doped hetroface cell. A field aided heteroface cell is newly designed on a basis of optimum data obtained from the theoretical analysis. The field aided heteroface cell fabricated using MOCVD exhibits a total/active area conversion efficiency of EFF. (tot) = 18.9% /EFF. (act.) = 21.4% under the natural incident light of 56.2 mW/cm\ulcorner having a low series resistance of Rs = 0.94 \ulcornercm\ulcornerand a high spectral response of S.R. (ext) > 90% in a range of $7700{\AA}$ < $8500{\AA}$.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.95-100
• /
• 2012

We show that the minimum EOP (eye-opening penalty) obtained by tunable dispersion compensation is a function of a figure of merit for a nonlinear process, $I_0L_{eff}$, where $I_0$ is the optical intensity and $L_{eff}$ is the effective length of the interaction region. Using this rule, we do not need to conduct nonlinear simulations in all the cases of signal power and transmission length to obtain the signal distortion in dispersion-managed optical transmission. Instead, we need to conduct a simulation in only one case of a signal power and find the functional relation, and then we can obtain the values of the signal distortion in other cases using the discovered functional relation. This technique can reduce the number of nonlinear simulations to less than 10%.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1758-1771
• /
• 2017

In this study, to determine the most effective alloy for shielding against gamma-rays, the gamma-ray shielding parameters of six types of cerrobend alloys have been investigated. Gamma-ray interaction with the cerrobend alloys has been discussed mainly in terms of total mass attenuation coefficient (${\mu}_t$), half value layer (HVL), tenth value layer (TVL), effective atomic number ($Z_{eff}$), and effective electron density ($N_{eff}$). These parameters have been calculated by theoretical approach using the ParShield program in a photon energy range between 0.1 MeV and 100 GeV. The dependence of these parameters on the incident photon energy and chemical composition of the cerrobend alloys has been studied.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.651-656
• /
• 1997

Fission product release (FPR) assessment for End Fitting Failure (EFF) in CANDU reactor loaded with CANFLEX-natural uranium (NU) fuel bundles has been peformed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The total channel I-131 release at the end of transient for EFF accident is calculated to be 380.8 TBq and 602.9 TBq for the CANFLEX bundle and standard bundle channel cases, respectively. They are 4.9% and 7.9% of the total inventory, respectively. The lower total releases of the CANFLEX bundle O6 channel are attributed to the lower initial fuel temperatures caused by the lower linear element power of the CANFLEX bundle compared with the standard bundle.