• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.49-52
• /
• 2008

The numerical analysis for gas temperature of turbine blade surface has been performed to investigate development of temperature with various blade edge shape. Two different types of the turbine which one is "Sharp" edge and the other is "Round" edge was modeled. Computations have been carried out several turbine rotational speeds in the range from 0 to 10,000 rpm for the each types of turbine edge shape. As a result, the more rotational speed of turbine increased, the more turbine blade's temperature decreased. It is also found that the surface temperature of turbine blades for sharp type edge were lower than the round type edge.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.115-124
• /
• 2002

This paper presents an active auxiliary edge-resonant DC link snubber with a ringing surge damper and a three-phase voltage source type zero voltage soft-switching inverter with the resonat snubber treated here for the AC servo motor driver applications. The operation of the active auxiliary edge-resonant DC link snubber circuit with PWM voltage is described, together with the practical design method to select its circuit parameters. The three-phase voltage source type soft-switching inverter with a single edge-resonant DC link snubber treated here is evaluated and discussed for the small-scale permanent magnet (PM) type-AC servo motor driver from an experimental point of view. In addition to these, the AC motor stator current and its motor speed response for the proposed three-phase soft-switching inverter employing Intelligent Power Module(IPM) based on IGBTS are compared with those of the conventional three-phase hard-switching inverter using IPM. The practical effectiveness of the three-phase soft-switching inverter-fed permanent magnet type AC motor speed tracking servo driver is proven on the basis of the common mode current in a novel type three-phase soft-switching inverter-fed AC motor side and the conductive noise on the mains terminal interface voltage as compared with those of the conventional three-phase hard-switching inverter-fed permanent magnet type AC servo motor driver for the speed tracking applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.206-209
• /
• 2002

With the progress of semiconductor processing technology, avalanohe photodiodes (APDs) based on InP/InGaAs are used for high-speed optical receiver modules. Planar-type APDs give higher reliability than mesa-type APDs. However, Planar-type APDs are struggled with a problem of intensed electric field at the junction curvature, which causes edge breakdown phenomena at the junction periphery. In this paper, we focused on studying the effects of junction curvature for APDs performances by different etching processes followed by single diffusion to from p-n junction. The performance of each process is characterized by observing electric field profiles and carrier generation rates. From the results, it can be understood to predict the optimum structure, which can minimize edge breakdown and improve the manufacturability.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.107-113
• /
• 2019

In this study, we examined the feasibility of considering the transverse edge effect of flat type linear induction motor as 2D finite element analysis (FEA) by changing the resistivity of secondary conductor. For this purpose, the 3D FEA analysis results were compared with the 2D FEA analysis results with the change of the resistivity of the secondary conductors. As a result, simply changing the resistivity could not accurately account for the transverse edge effect of LIM because of leakage components that could not be considered by 2D FEA.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.30-36
• /
• 1968

The measurements on the various items, such as arch form, kinds of anterior dental arch, degree of curvature in anterior dental arches, relationship between direction of the disto-incisal edge of the canine and first premolar, and kinds of posterior dental arch in upper dental arches were studied on 311 cases of the Korean adults aged from 20 to 30years. The results were as follows. 1. The commonest type of the upper dental arches was U-type (53.7%), the remaining were O-type (25.4%) and V-type (20.0%). 2. A slight curvature type (71.87%) prevailed against angulated curvature type in upper anterior dental arches. 3. The degree of curvature from $121^{\circ}$ to $160^{\circ}$ in anterior dental arches was common, and the degree of curve of 1-type with on curvature was smaller than 4, 5 type with two curvature. 4. The direction of the disto-incisal edge of canine went between the tip of the buccal cusp and the lingual incline of the buccal cusp of the first premolar in most dental arches and went lingual incline of the buccal cusp of the first premolar in U-type, from buccal cusp to lingual cusp of the first premolar in O-type and were distributed from buccal edge to central groove of the first premolar in V-type. 5. A posterior dental arch with almost straight curvature was common in 60.87%, and 4-type with a half rounded curve from first premolar to second molar was next.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1635-1644
• /
• 1993

In this paper, we examine the statistical characteristics of edge enhancing filters and their efficacy as preprocessing operator before edge detection. In particular, edge enhancing filters called the Comparison and Selection(CS), Hachimura-kuwahara(HK), and Selective Average(SA) filters are considered. These filters can reduce noise while producing step-type edges, thus seem to be effective for preprocessing noisy images prior to applying edge detecors. The ability of edge enhancing filters to suppress white Gaussian noise and the error probabilities occured during the edge detection following SA prefiltering are evaluated statistically through numerical analysis. The effect of prefiltering on edge detection is assessed by applying the edge enhancing fitters to a noise image degraded by additive white noise prior to applying the Sobel operator and the Laplacian of Gaussian( LoG ) operator, respectively. It is shown that the edge enhancing filters tend to produce ideal step-type edges while reducing the noise reasonably well, and the use of edge enhancing filters prior to edge detection can improve the performance of subsequent edge detector.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.2
• /
• pp.57-61
• /
• 1999

In the field of image compression, Classified Vector Quantization(CVQ) reveals attractive characteristics for preserving perceptual features, such as edges. However, the classification scheme is not generalized to effectively reconstruct different kinds of edge patterns in the original CVQ that predefines several linear-type edge classes: vortical edge horizontal edge diagonal edge classes. In this paper, we propose a new classification scheme, especially for edge blocks based on the similarity measure for edge patterns. An edge block is transformed to a feature vector that describes the detailed shape of the edge pattern The classes for edges are formulated automatically from the training images to result in the generalization of various shapes of edge patterns. The experimental results show the generated linear/nonlinear types of edge classes. The integrity of all the edges is faithfully preserved in the reconstructed image based on the various type of edge codebooks generated at 0.6875bpp.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.871-875
• /
• 2001

Cobalt silicidation at sidewall spacer edge of Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) with post annealing treatment for capacitor forming process has been investigated as a function of dopant species. Cobalt silicidation of nMOSFET with n-type Lightly Doped Drain (LDD) and pMOSFET with p-type LDD produces a well-developed cobalt silicide with its lateral growth underneath the sidewall spacer. In case of pMOSFET with n-type LDD, however, a void is formed at the sidewall spacer edge with no lateral growth of cobalt silicide. The void formation seems to be due to a retarded silicidation process at the LDD region during the first Rapid Thermal Annealing (RTA) for the reaction of Co with Si, resulting in cobalt mono silicide at the LDD region. The subsequent second RTA converts the cobalt monosilicide into cobalt disilicide with the consumption of Si atoms from the Si substrate, producing the void at the sidewall spacer edge in the Si region. The void formed at the sidewall spacer edge serves as a resistance in the current-voltage characteristics of the pMOSFET device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.165-170
• /
• 2007

During the conceptual design phase of a wing-body-canard type fighter class aircraft, as a method of maneuverability enhancement for an aircraft, effects of canard-leading edge flap scheduling have been studied. In this study, corrected supersonic panel method has been used to predict the drag polar characteristics due to canard-leading edge flap deflections in the high speed regime. Utilizing the predicted drag polar curves, the canard-leading edge flap scheduling laws have been established. These scheduling laws are the relation of canard-leading edge flap deflections and the flight conditions to maximize the lift-drag ratio. Based on the results obtained from the canard-leading edge flap scheduling, the present method has shown to be useful to enhance the maneuverability of wing-body-canard type fighter class aircraft.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.19-36
• /
• 1988

To investigate edge vegetation structure and edge species in Chiak Mountain National Park, field survey was executed from July to September, 1988. Canonpy drip-line type, cantilevered type and advancing type of edge vegetation were observed on site. The relative importance values of major species in each crown layer were changed along distance from edge to forest interior differently by aspect and present tree layer vegetation. Especially light-oriented edge species as codominant species were observed in Pinus densiflora forest interior at south slope and moisture - oriented species as codominant species were observed with light-oriented species in north edge beside torrential stream. No. of species and individuals by crown layer, species diversities and dissimilarities were decreased according to the distance from edge to forest interior, and edge depth was estimated as 15-20m. Dominant species of edge in shrub and ground layer were different by altitude and topographic locations; valley, ridge, summit and edge species at summit were not observed at other area. Floristic similarities between edge vegetations at different environments were affected by altitude, aspect and topographic location. Frequency classes of edge species were different by aspect, altitude and topographic location. Weigela subscssilis showed high frequency class in all environment conditions and Quercus mongolica, Lindera obtusiloba, Symplocos chinensis for, pilosa, weigela subscssilis, Fraxinus rhynchophylla, Actinidia arguta, Rubus crategifolius. Pinus densiflora, Aralia elata etc, were observed as edge species at all environmental conditions, respectively.