• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.123-132
• /
• 2014

This study aims to develop the diagnostic evaluation method of the riverine ecobelt for construction, conservation, and maintenance of the riverine ecobelt. The value indices in the proposed evaluation method are composed of total 5 fields and 19 elements. The 5 fields are flood control, environmental function, growth of plants, ecobelt function, and restoration potential. Flood control field is composed of total 3 elements such as length, width, and density of green area. Environmental function field is composed of 4 elements such as park use, landscape boundary and edge, microclimate control, non-point pollution control. Growth of plants field is composed of 6 elements such as species composition, forest height, stratum structure, vine plants, plant vitality, and succession of plants. Ecobelt function field is composed of 4 elements such as longitudinal connectivity, lateral connectivity, in-stream forest or habitat, roads on bank top. Restoration potential field is composed of 2 elements such as landform and land use of the immediate vicinity. The score system ranging 1~4 was adopted. The weighting parameters of elements were unified with each other. The final grade system ranging 1~5(1: very good~5: very bad) was adopted, and the final grade was evaluated by the mean values of each field. According to the test application of the diagnostic evaluation method of the riverine ecobelt, the final grades showed effectively the real condition of each site.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.369-378
• /
• 2003

The statistical modeling was introduced to satisfy various experimental conditions on the sorption of heavy metals (Pb, Cu, Cd, and Zn) by clay minerals, i.e. kaolinite, illite and chlorite. The Box-Behnken model designed statistically was applied to determine a relative impact among three variables such as pH, HCO3(or K) concentration and initial concentration of heavy metals. The SAS program was used to obtain the statistical solution by surface response analysis. The results of a statistical sorption modelling indicated that pH is a strong impact of the variables influencing the sorption of heavy metals. A relative effect between an initial concentration of heavy metals and bicarbonate(or K) concentration is dependent on solution condition. The sorption edge of heavy metals as function of pH shows sigmoidal curve, and a great increase in the range of pH 6～8. The sorption sequence among heavy metals is Cu>Pb>>Zn>Cd. The solution chemistry exerts greater influence on the sorption of heavy metals rather than the crystal chemistry of clay minerals. The potassium exerts some effect into a sorption competition with heavy metals. The research suggests that the statistical modeling is an effective method to demonstrate sorption results in three dimension and to reduce the effort of batch sorption experiment.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.204-210
• /
• 2013

The patients who had been operated total mastectomy are different from general women in their breasts thickness due to breast surgery. As a result, digital chest image from total mastectomy patients will be different attenuation. The main objective for this study is to show that a proper Ion chamber standard combination measuring MTF which is objective basis for Digital image, when be x-ray for total mastectomy patient. We have designed the unique number that shown Left is 1, Right is 2, Center is 3 and have put the edge phantom on detector ion chamber. Lastly, we have obtained experiment images. The evaluations of all image quality have measured by 50% MTF of spatial resolution and absorption dose using Matlab(R2007a). The result showed that average exposure condition, MTF value, absorption dose for 1+3 and 2+3 combinations were 2.745 mAs, 1.925 lp/mm, 0.688 mGy. Consequently, that showed high MTF, DQE and low dose than other combinations. Therefore, a proper changes of ion chambers are able to improve image quality and to reduce radiation exposure when be X-ray for total mastectomy patients. Also, it will be possible to standard for application chamber combination and utilization on clinical detection.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.95-103
• /
• 2014

Purpose - Korea has a better geographical location than other nations in the Northeast Asian region. This means that Korea has an opportunity to become the center of international physical distribution in Northeast Asia. Korea should take advantage of this opportunity by exploring appropriate strategies to achieve this goal, assuming government willingness, with a view to capitalizing on the geographical advantage of the Korean peninsula and constructing a comprehensive physical distribution network system. If we prepare for this scenario, Korea could become the center of international physical distribution in Northeast Asia. Research design, data, and methodology - This study has the purpose of determining how shipping companies form partnerships with third-party logistics providers, and the relevant implications. The survey methods used were personal interview and a questionnaire distributed through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, out of which 285 were returned. Of the collected questionnaires, 10 were excluded because of insufficient content, leaving 275 to be used in the study as available valid samples. The data that was collected from these samples was analyzed using the data coating process and by employing a statistical package program. Results - Flexible policies, administration, and systems will be needed to create better business practices. In this dissertation, first and foremost, the results reveal that in order to become the center of Northeast Asian logistics, Korea must transition into a new paradigm based on the current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. Flexible policies, administration, and systems will be required to create better business practices. Domestic logistics corporations need to occupy a strategic logistics hub, create a logistics network, and activate value-added logistics business strategies by ensuring significant manpower and by building a logistics information system to strengthen their competitive edge, creating an improved system. Conclusions - In this dissertation, first and foremost, we point out that in order to become a center of North East Logistics, Korea should change to a new paradigm from the old one based on current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. More reasonable business laws, systems, and policies based on market-driven flexibility and transparency should be created. Moreover, social norms and rules should be reasonably established, to accomplish political and social security. Korea has to cultivate a culture of tolerance for foreign companies. This involves a change of paradigm for the development of the capital city and satellite cities. It will take a powerful task force or organization to plan and execute the vision that aims to meet these needs, accomplish the necessary goals, use the appropriate system effectively, and make Korea a key country in the field of Northeast Asian logistics.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.296-309
• /
• 2003

One of commercial applications of mobile computing is ATIS(Advanced Traveler Information Systems) in ITS(Intelligent Transport Systems). In ATIS, a primary mobile computing task is to compute the shortest path from the current location to the destination. In this paper, we have studied the shortest path re-computation problem that arises in the DRGS(Dynamic Route Guidance System) in ATIS where the cost of topological digital road map is frequently updated as traffic condition changes dynamically. Previously suggested methods either re-compute the shortest path from scratch or re-compute the shortest path just between the two end nodes of the edge where the cost change occurs. However, these methods we trivial in that they do not intelligently utilize the previously computed shortest path information. In this paper, we propose an efficient approximate shortest path re-computation method based on the dynamic window scheme. The proposed method re-computes an approximate shortest path very quickly by utilizing the previously computed shortest path information. We first show the theoretical analysis of our methods and then present an in-depth experimental performance analysis by implementing it on grid graphs as well as a real digital road map.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.723-730
• /
• 2012

The radar cross section(RCS) of a trihedral corner reflector(TCR) should be accurately computed when it is used as an external calibration target for a satellite synthetic aperture radar(SAR) calibration campaign. This paper presents the RCS analysis on a trihedral corner reflector which is installed on a calibration site, using the wave reflection from the rough surface and the wave diffraction from the TCR edges. The results in this paper show quantitatively the effect of the front surface on the RCS of a TCR. The difference of the RCS between a TCR in air and a TCR on a ground surface is computed by including the interaction term which consists of the edge diffraction from the TCR edges and the surface reflection from the front rough surface. The reflection coefficient of a randomly rough surface is a function of the surface roughness and dielectric constant of the surface. The RCS of $10{\lambda}$ size TCR on a ground is 0.46 dB higher than TCR in air at 9.65 GHz, and this can reach at maximum 1.55 dB depending on a surface condition and TCR size. The effect of the front surface on the RCS of a TCR increases, as the surface roughness decreases, the soil moisture increases, and the size of TCR in wavelength decreases.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.103-111
• /
• 2017

In this study, the thermomechanical stress and fatigue analysis of a high voltage and high current (3,300 V/1200 A) insulated gate bipolar transistor (IGBT) module used for electric locomotive applications were performed under thermal cycling condition. Especially, the reliability of the copper wire and the ribbon wire were compared with that of the conventional aluminum wire. The copper wire showed three times higher stress than the aluminum wire. The ribbon type wire showed a higher stress than the circular type wire, and the copper ribbon wire showed the highest stress. The fatigue analysis results of the chip solder connecting the chip and the direct bond copper (DBC) indicated that the crack of the solder mainly occurred at the outer edge of the solder. In case of the circular wire, cracking of the solder occurred at 35,000 thermal cycles, and the crack area in the copper wire was larger than that of the aluminum wire. On the other hand, when the ribbon wire was used, the crack area was smaller than that of the circular wire. In case of the solder existing between DBC and base plate, the crack growth rate was similar regardless of the material and shape of the wire. However, cracking occurred earlier than chip solder, and more than half of the solder was failed at 40,000 cycles. Therefore, it is expected that the reliability of the solder between DBC and base plate would be worse than the chip solder.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.307-314
• /
• 2016

Shear characteristics of soils can be investigated using various types of shear stress measuring apparatus. Ring shear tests are often applied for examining the residual shear strength under the unlimited deformation. This paper presents drainage-consolidation-shear velocity dependent undrained shear strengths measured in terms of water leakage. A series of ring shear tests were performed under the constant normal stress (50 kPa) and controled shear velocity ranging from 0.01~1 mm/sec under the undrained condition. As a result, undrained shear strengths are dependent on shear velocity. It exhibits that straining hardening behavior is observed for the shear velocity lower than 0.1 mm/sec; however, the strain softening behavior is observed for the shear velocity higher than 0.1 mm/sec. Water leakage can cause the increase in shear stress irrespective of shear velocity. Shear stress increases with increasing amount of water leakage. It is due to the fact that the small grains and water flow out through the rubble edge in the ring shear box. Repetitive saturation and consolidation processes may minimize the error.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.1-8
• /
• 2005

A $0.35\mu$m SiGe BiCMOS fabrication process has been timely developed, which is aiming at wireless RF ICs development and fast growing SiGe RF market. With non-selective SiGe epilayer, SiGe HBTs in this process used trapezoidal Ge base profile for the enhanced AC performance via Ge induced bandgap niuoin. The characteristics of hFE 100, $f_{T}\;45GHz,\;F_{max}\;50GHz,\;NF_{min}\;0.8dB$ have been obtained by optimizing not only SiGe base profile but also RTA condition after emitter polysilicon deposition, which enables the SiGe technology competition against the worldwide cutting edge SiGe BiCMOS technology. In addition, the process incorporates the CMOS logic, which is fully compatible with $0.35\mu$m pure logic technology. High Q passive elements are also provided for high precision analog circuit designs, and their quality factors of W(1pF) and inductor(2nH) are 80, 12.5, respectively.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.459-465
• /
• 1998

To obtain the basic data for the conservation and cultivation of native herb species under the forest, the relations between distribution of native herb species and site factors, distribution of native herb species, and site factors were surveyed on natural forest at subalpine zone in Mt. Odae. Ainsliaea acerifolia, Pseudostellaria palibiniana and Pimpinedla brachycarpa were distributed mainly on broadleaved mixed forest, Clematis fusca var. coreana, Carex siderosticta. Isodon excisus and Vicia unijuga did mainly on gab sites. The distribution of Ligularia fisheri, Aconitum pseudo-laeve var. erectum, Cacalia hastata and Artemisia stolonifera were significantly differed between slope directions. Artemisia stolonifera was distributed more frequently in south directed slope, and Ligularia fisheri, Aconitum pseudo-laeve var. erectum and Cacalia hastata were distributed more frequently in north and west directed slope than the other. The distribution of Aconitum pseudo-laeve var. erectum and Artemisia stolonifera were significantly differed between soil moisture conditions. Artemisia stolonifera was distributed mainly on the dry site, but Aconitum pseudo-laeve var. erectum did mainly on the dry site. Negative correlations between density of Clematis fusca var. coreana, Carex siderosticta. Isodon excises and Vicia unijuga and crown coverage was proved. Aconitum pseudo-laeve var. erectum, Pimpinella brachycarpa, Meehania urticifolia, Smilacina japonica and Pseudostellaria palibiniana were mainly distributed on wet and shady sites under forest canopy, but Pedicularis resupinata, Clematis fusca var. coreana and Artemisia stolonifera did on sunny sites at forest edge or gab.