• Strategy21
• /
• s.43
• /
• pp.5-28
• /
• 2018

The tensions between the U.S and China, which form the two pillars of the G2 era, seem to have persisted even after the Trump administration inaugurated. The strong confrontation between the two in recent foreign security issues may drive to develop an inadvertent military conflict, and it is high likely to occur in the maritime are. The purpose of this study is not only to analyze the balance of modernized naval forces in the PLAN through naval strategy changes and weapons system modernization trend, but also to predict the impact of the geographical proximity difference on the balance of naval forces in the disputed areas. It examined the impact of distance and geography on naval power by assessing the modernization pattern of the PLAN and capabilities in the context of two scenarios at different distances from China by 2020: one centered on Taiwan and the other on the Spratly Islands. The PLAN's strategy had impact on operational concept and forces construction. First, from the viewpoint of operation operational concept, it can be seen that the passive defense is changing into active defense. Second, in terms of power construction, it can threaten the surface and submarines of U.S power from a distance. And they generated follow three features; The ocean is not the focus of Chinese submarines, Horizontal and vertical expansion of Chinese naval vessels, The improvement of the suppression ability as the Chinese naval modernization ratio increases. The strength of the PLAN is dominant over the U.S in terms of reserves, and it can complement the qualitative deterioration by utilizing nearby bases in the vicinity of the mainland, such as the Taiwan Strait. However, due to the shortage of aircraft carriers, there is a possibility that it will take some time to secure the advantage of air and ocean in the amphibious operation. Therefore, as the dispute is prolonged, China may fail to achieve its original goal. In addition, the lack of cutting edge Commanding Ships may bring to weaken the C2 capabilities. At results, it is expected that PLAN will not be able to have a superiority in the short term due to lagging behind U.S advanced technology. Nevertheless, PLAN has strengthened its naval power through modernization sufficiently and it is highly likely to use force. Especially, it is more likely in the region where the naval power operation like the Taiwan Strait is possible with the almost equality to that of the United States. China will continue to use its naval forces to achieve a rapid and decisive victory over U.S in the close area from the land.

• Culinary science and hospitality research
• /
• v.19 no.2
• /
• pp.130-148
• /
• 2013

Domestic pizza market in Korea is in the age of maturity, and competition in the market is getting intense. Brand personality that can prompt consumer sensibility is evaluated as a proper method to differentiate the image of a corporate rather than products or technology that can be copied easily by competitors. In this study, we examined the structural relationships among brand personality of pizza brands in Korea, customer-brand relationship quality, and repurchase intention with selected measurement based on Aaker's Big 5. Based on questionnaires answered by 291 customers, this study examined validity and reliability by using SPSS 16.0 and AMOS 5.0 for its hypotheses. The result of the study modelling were GFI=0.900, NFI=0.922, CFI=0.965, RMSEA=0.050 at the level of ${\chi}^2$=384.130(df=1.715, p<0.001). First, sincerity, competence, and sophistication of the pizza brand personality had a positive effect on intimacy. Second, sincerity, competence, sophistication, and strength of the pizza brand personality had a positive effect on brand partner quality. Also, intimacy and brand partner quality had a positive effect on repurchase intention. Therefore, in the practical perspective, pizza brand management can utilize the findings of specific pizza brand personality in creating a competitive edge for marketing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.475-482
• /
• 2007

Most golfers believe that knowing yardages will improve their score. Certainly it helps with club selection. But, simple "Graphic" yardage guides being notorious for error and inaccuracies, which a serious golfer will pick immediately, only serve to erode the players enjoyment and ultimately, golf course satisfaction. Someone believes with low-level aerial photographic images, golfer will be impressed with the accuracy of the depiction, helping them play a more confident game. But, there are no mapping products in true 3-D available in the world that allows a golfer to determine shot distances in yards or meters. So, we suggest an lenticular technology for real 3-D display as a viable alternative to conventional image map solution. This technology is an image display method for the generation of multi-image effects like 3D visualization or animation. This methodology is cutting edge stereoscopic image which overcomes the limitation of conventional photo tech by recomposing and producing 3 dimensional images. A significant strength of this methods its versatility concerning display effects. The main use of the hardcopy 3-D lenticular displays is in the fields of science, education, planning, and representation. This paper gives a concise overview of the lenticular foil technology and describes the production of the true 3-D yardage book of golf courses. For this study, 3-D effects are achieved and evaluated with the lenticular display by incorporation multiple synthetic images based on digital topographic terrain model and by using the two images of the actual stereopair.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.25-33
• /
• 2006

We propose a method that automatically classifies the images into the object and non-object images. An object image is the image with object(s). An object in an image is defined as a set of regions that lie around center of the image and have significant color distribution against the other surround (or background) regions. We define four measures based on the characteristics of an object to classify the images. The center significance is calculated from the difference in color distribution between the center area and its surrounding region. Second measure is the variance of significantly correlated colors in the image plane. Significantly correlated colors are first defined as the colors of two adjacent pixels that appear more frequently around center of an image rather than at the background of the image. Third one is edge strength at the boundary of candidate for the object. By the way, it is computationally expensive to extract third value because central objects are extracted. So, we define fourth measure which is similar with third measure in characteristic. Fourth one can be calculated more fast but show less accuracy than third one. To classify the images we combine each measure by training the neural network and SYM. We compare classification accuracies of these two classifiers.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.341-366
• /
• 2013

The term, Mittelstand, has no exact english translation for the definition, but, today, Mittelstand refers to small and medium-sized enterprises(SME), mostly family-owned firms in Germany. The Mittelstand is called the backbone of the German economy because it drove the economic miracle after World War II. During the global recession and the euro zone's debt crisis in recent years, in which european businesses have faced the near-collapse of competitiveness particularly in manufacturing, the German exports are booming and exceeded exports of China in 2012. Most importantly, the Germany economic performance has been widely attributed to the strength of the Mittelstand. Many of countries, even some leading public companies are seeking to emulate the success of the Mittelstand. Investors evaluate that many of Germany's investable "hidden champions" are Mittelstand companies. The purpose of this study is to present some of answers to the following questions: Firstly, what makes the German Mittelstand so successful? Secondly, what does the success of the German Mittelstand mean for the Korean SMEs in global competitiveness? Thirdly, what Korean government has to do improve the global competitiveness of the Korean SMEs? Some discussions in this study mention the managerial implications for Korean exporting SMEs particularly in manufacturing. Several factors that account for the success of the German Mittelstand are technological excellence and the tradition of family-owned management, concentration on niche market and globalization, and institutional supports. There are some of important lessons to be learned from the German Mittelstand. If the purposes of Korean SMEs want to remain in the sustainable competitive advantage and withstand unforeseen economic turbulences in the future, they must be able to meet the followings: 1) Technology that meets the global standard or exceeding it 2) Competitiveness in price in the global market 3) Active involvement in the globalization process, utilizing various entry modes Innovative products at globally competitive price are a crucial point for Korean exporting SMEs to achieve their competitive edge over others in the target markets abroad. It is time for Korean SMEs to cultivate a core competence in manufacturing in order to position Korea as a global manufacturing hub with SMEs leading.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.45-57
• /
• 2002

In this paper, the results gained by applying many impingement models to the cylinder and flat plate were analyzed in comparison with the experimental data to study a spray/wall interaction phenomena. To begin with, the behavior of spray injected normal to the wall was analysed using three different impingement models ; Naber and Reitz model(NR model), Watkins and Wang model(WW model) and Park and Watkins model(PW model) in the present calculation. The results obtained from these models were compared with experimental data of Katsura et. al. The results indicated that PW model was in better agreement with experimental data than the NR and WW model. Also f3r spray injected at 30DEG , the result of three models were compared with experimental data of Fujimoto et. al. The results showed that m model overpredicted the penetration in the radial direction because this model was based on the inviscid jet analogy. WW model did not predicted the radius and height of the wall spray effectively. It might be thought that this discrepancy was due to the lack of consideration of spray film velocity occurred at impingement site. The result of PW model agrees with the experimental data as time goes on. In particular, a height of the spray droplets was predicted more closely to the experimental data than the other two models. The results of PW model in which the spray droplets were distributed densely around the edge of droplet distribution shaped in a circle had an agreement with the experimental data of Fujimoto et. al. Therefore, it was concluded that PW model performed better than M and WW model for prediction of spray behavior. The numerical calculation using PW model performed to the cylinder similar to the real shape of DI engine. The results showed that vortex strength near the wall in the cylinder was stronger than that in the case of flat plate. Contrary to the flat plat, an existence of the side wall in the cylinder caused the tangential velocity component to be reduced and the normal velocity component to be increased. The flow tends to rotate to the inside of cylinder going upward to the right side wall of cylinder gradually as time passes. Also, the results showed that as the spray angle increases, the gas velocity distribution and the tumble flow seemed to be formed widely.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.393-416
• /
• 2009

This paper explores the technology resource-based determinants influencing internationalization performance of Korean software-related new ventures. On the ground of the study by Zahra et al.(2003), this paper aims to test empirically in Korea how interaction effects of tangible and intangible technological resources, as firm capability, are related to software new ventures' internationalization performance. The test results shows that intangible technological resource represented by R&D intensity is not significantly related to internationalization performance, but reveals that intangible technological resource represented by strength of technological cooperation network and technological reputation is positively and significantly associated with internationalization performance. Internationalization performance is more significantly and positively associated with the interactions of tangible technological resource and intangible technological resource than those resources respectively. The implication for the findings in the paper is that cutting edge technological capability of software new ventures can be more closely associated with internationalization performance if those resources are fully utilized or leveraged by intangible resources acquired by cooperation with local networks and created through technological reputation of new ventures.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.1-8
• /
• 2008

The lateral strength test of bending type was done to investigate the lateral capacity of the double bolt connection of domestic larix glulam according to bolt spacing. In the shear specimen, which is bolted connection in the inserted plate type, the hole of bolt was made, changing the diameter of bolt (12 mm and 16 mm), the number of bolt (single bolt : control and double bolt), the direction of bolt row (in parallel to grain : Type-A and in perpendicular to grain : Type-B) and the bolt spacing (Type-A : 4 d and 7 d and Type-B : 3 d and 5 d). Lateral capacity and failure mode of bolt connection were compared according to conditions. In prototype design (KBCS, 2000), the reduction factor of the allowable shear resistance that the bolt spacing is reduced was calculated. The results were as follows. 1) Bearing stress per bolt in the single and double bolt connection of Type-A was directly proportional to bolt diameter and bolt spacing. Bearing stress of Type-B decreased as bolt diameter was increased, and decreased by 2~10% when bolt diameter was increased. 2) In the single bolt connection and the double bolt connection of Type-A, the splitted failure was formed in the edge direction. When the bolt spacing was 3 d in Type-B, bolt was yielded more in the part of tension than in the part of compression, and the splitted failure started at the bolt in the part of tension. In the 5 d spacing specimen, the bolt in the part of tension was yielded similarly to bolt in the part of compression, and the splitted failure started in the part of compression. 3) In the prototype design, the reduction factor was calculated by non-dimensionizing the yielding load in the standard of bolt spacing (Type A : 7 d and Type B : 5 d). In 12 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.87 and 0.55, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.55, respectively. In 16 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.96 and 0.76, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.77, respectively.