• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.591-594
• /
• 1986

An asymptotic solution of electro-magnetic waves diffracted by a dielectric wedge of the angle larger than $180^{\circ}$ is obtained in case of the incidence of a E-polarized plane wave. Based on the dual integral equation in the spectral domain, physical optics approximation is supplemented by correction currents distributed along the interfaces. Those currents are expanded in a series of Bessel functions, known as Neumann's expansion of which fractional order is chosen to satisfy the static edge condition as the limiting value of dynamic case. Numerical results of edge diffraction patterns and field patterns are presented for some typical cases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.757-761
• /
• 2001

In order to study noise barriers of complex shapes and to assess their efficiency, precise prediction model is required. For instance, geometrical approaches cannot deal with complex diffraction effects. So that in this paper, the time domain numerical computation method(Computational Aeroacoustics method) is applied to estimate noise reduction by diffraction and finite impedance condition. The CAA method can be used to calculate exactly the pressure of complex barrier shape with different impedance condition, such as T-shape, cylindrical edge and multi-edge noise barriers.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.233-236
• /
• 1999

The welding residual stress should be considered in fatigue stress analysis because it develope during the process of the electric resistance spot welding and it causes bad affect on the fatigue crack initiation and growth at nugget edge of spot welded points. Therefore the accurate estimation of residual stress is crucial. In this study, nonlinear finite element analysis on welding residual stress generated during the process of the spot welding was conducted, and their results were compared with the experimental data measured by X-ray diffraction method. From the results, it was found that welding residual stress existed as tension in the nugget center and as compression around the nugget edge.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.330-336
• /
• 2009

The size of crystallites in mono-dispersed cubic silver bromide grains was measured by applying a powder X-ray diffraction method and Scherrer's equation to grains that were suspended in swollen gelatin layers. In order to evaluate the existence of defects, the measured crystallite size was compared to those measured by using a scanning electron microscope. In the case of the grains prepared by the controlled double jet method, the size of crystallites was equal to the edge length of the grains that had edge lengths smaller than 400 nm. This result proved the usefulness of the above-stated method for measuring the size of crystallites and also evaluating the presence of any crystal defect in each grain. In the case of the grains, which were precipitated in the presence of a sensitizing dye and potassium iodide, the size of crystallites was smaller than the edge's length, indicating the discontinuities in the grains introduced during the precipitation process.

• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.371-380
• /
• 2010

CATR(Compact Antenna Test Range)은 실내에서 반사판을 사용하여 균일 평면파를 제공하는 시험 시설이다. 반사판의 가장자리에서 발생되는 회절 전계는 균일 평면파의 리플(ripple)을 증가시키는 요인이 되기 때문에 CATR에서는 서레이션(serration)을 반사판의 가장자리에 부착하여 균일 평면파의 리플을 낮추게 된다. 일반적으로 서레이션의 회절 전계는 이중 적분으로 표현되는 프레넬 회절식(Fresnel diffraction formula)을 사용하여 해석하고, 서레이션 구조는 프레넬 회절식의 이중 적분 영역에 적용시키기 위해 푸리에 급수로 표현한다. 본 논문에서 는 새로운 shark-fin 형태를 갖는 서레이션을 사용하였고, 제안된 서레이션에 인접한 서레이션의 높이에 차이를 주는 구조를 제안하였다. 기존 삼각형 구조의 서레이션과 새로운 shark-fin 구조의 서레이션을 비교하여 제안한 shark-fin 구조의 서레이션에서 quiet zone의 크기를 보다 넓힐 수 있음을 확인하였고, 인접 서레이션의 높이에 변화를 주었을 때 동일한 높이보다 리플이 낮아짐을 확인하였다. 따라서 본 논문에서 제안한 shark-fin 형태의 높이가 다른 서레이션 구조는 CATR의 시험 영역에 리플이 낮은 균일 평면파를 제공할 수 있을 것으로 생각된다.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.874-883
• /
• 1988

A complete form of physical optics solution to the diffraction of electromagnetic waves by a dielectric wedge with arbitrary dielectric constant and general wedge angle is obtained for an incident plane wave with any angle. Based on the formulation of dual integral equation in the spectral domain, the physical optics solution is constructed by sum of geometrical optics term including multiple reflection inside the wedge and the edge diffracted field, of which diffraction functions are represented in a quite simple form as series of cotangent functions weighted by the Fresnel reflection coefficients. Since diffraction patterns of physical optics are discontinous at dielectric interfaces, Part II and III of these three companion papers will be concerned with correction to the error of the physical optics approximation.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.412-418
• /
• 1999

기하학적 균일 회절 이론 (Uniform Geometrical Theory of Diffraction)을 이용하여 옵\ulcorner 파라볼릭 안테나의 산란 특성을 분석하였다. 먼저 파추적법(Ray Tracing)에 의하여 음영경계를 나눈후, 각 영역에 존재하는 반사파와 회절파를 기하학적 균일 회절 이론을 이용해 구하였다. 또한, 옵\ulcorner 파라볼릭 안테나의 모서리(edge)의 형태가 전자파의 산란 특성에 미치는 영향을 알아보기 위해 knife 모서리인 경우와 원형 캡을 부착한 경우를 분석하여 비교하였다.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.82-95
• /
• 1992

There is the high interest for sensing of tool wear with the aim of controlling machine tools productivity from the point of view of qualitity. Difficulties in this measurement are also known. This study is on the development of measurement setup for crater wear by CCD image inturning. In this study, the crater wear measurement system consists of the He-Ne gas laser, diffraction grating. CCD camera, noise filter, slit, microcomputer, diverging lens, converging lens and so on. He-Ne laser beam passes through a diverging lens and a diffraction grating is positioned properly. A converging lens focuses so that the interference fringes can be obtained on the crater wear. Performance test revealed that the developed image technique provides precise, absolute tool-wear quantification and reduces human measurement errors. The results obtained are as follows 1. The digitizing of one image requires less than 2ses. 2. It can give detailed information on crater wear with limited times and errors 3. All parameters required by specification are easily obtained for several points of the cutting edge.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.149-149
• /
• 2011

CdS films were deposited on glass substrates by R.F. magnetron sputtering method and the films were annealed at various substrate temperatures ranging from room temperature to $300^{\circ}C$. Structural properties of the films were studied by X-ray diffraction analysis. The structural parameters as crystallite size have been evaluated. The crystallite sizes were found to increase, and the X-ray diffraction patterns were seen to sharpen by increasing substrate temperatures. X-ray diffraction patterns of these films indicated that they contain both cubic (zincblende) and hexagonal (wurtzite) structures as a mixture. Optical properties of the films were measured at room temperature by using UV/VIS spectrometer in the wavelength range of 190 to 1100nm and optical absorption coefficients were calculated using these data. The energy gap of the films was found to decrease, and the band edge sharpness of the optical absorption was seen to oscillate by annealing. The results show that heat treatments under optimal annealing condition can provide significant improvements in the properties of CdS thin films.

• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1027-1038
• /
• 1988

This paper, the last part of these three companion papers treated the electromagnetic diffraction by a dielectric wedge, presents the correction to the physical optics approcomation by the sheet currents of the Neumann expansion. Those expansion coefficients obtained by solving dual series equation amenable to simple numerical calculation may provide the asymprotically corrected solution. The validity of this result, satisfying both the edge condition near the tip of the dielectric wedge and the boundary condition along dielectric interfaces, is assured by approach of the corrected diffraction pattern to that of a perfectly conducting wedge for large permittivity of dielectric wedge.