• KIEAE Journal
• /
• v.7 no.5
• /
• pp.53-58
• /
• 2007

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in multi-layered building materials, and predict the indoor pollutant concentration through the CFD(Computational of Fluid Dynamics) and CRIAQ2 based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient(hm') which indicates the existing convective mass transfer coefficient(hm) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.969-980
• /
• 2008

This research was performed to simulate shellfish production systems and sales in Gamak Bay, South Korea. To study the way the shellfish system generates maxima, a numerical model was developed to simulate the model under a control and a number of different scenarios. The program calculates the EMERGY flows by multiplying the flows of energy and materials by the appropriate solar transformity. In this study, an energy systems model was built to simulate the variation of sustainability for oyster aquaculture. The results of the simulation based on 2005 data that as oyster production yield slightly increases, money and assets increase to a steady state. When the program is run control simulation, the system reaches carrying capacity after 8 years. The simulation of models with price of purchased inputs increased with 3.5% inflation rate per year showed maximum benefit of shellfish production occurs after 6 years but amounts are less than control simulation, and then decreases slightly in money and yield results. The results with 3.5% inflation and increase of oyster price annually showed steady and slightly increase of money and yield.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.93-102
• /
• 2014

In the flood plain, river facilities such as sports facilities and ecological park are builded up since the late 2000s. The recent increase of rainfall intensity and flood frequency results in the immersions of parks and river facilities located in the flood plain. Therefore it is necessary to perform the numerical analysis for the extreme rain storm in the flood plain. In this study, to analyze the hydraulic impact by lowering and rising of the water level at flood plain, Both the FaSTMECH, which is a quasi-unsteady flow analysis model to be used for simulating the wet and dry, and the Nays2D, which is unsteady flow analysis model, are used in this study. Also, the flow velocity distribution and the inundation are compared over a period of the typhoon. As a result, the flow velocity distribution at flood plain showed very low values compared to the flow rate in the main channel. This means that the problem of sedimentation is more important than that of erosion in the flood plain.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.319-329
• /
• 2009

Sediment release openings or pipes are installed in the flood control dam constructed to reduce flood damages, which are to allow water and sediments pass through the dam and to prevent flow blockage and sedimentation in the upstream area of the dam. The Hantan River Flood Control Dam (HRFCD) has been projected for flood damage reduction and sediment release openings and ecological passages are considered for the dam design. In this study, sediment deposition due to the construction of HRFCD was analyzed using the HEC-6 model and compared with the state before the dam construction with respect to the conditions of the annual mean daily discharge and annual discharge hydrograph. According to the numerical results, although downstream water levels were changed by the dam structure, the effects of bed changes were not propagated from the dam over 2 km upstream. Also, 2D numerical models of RMA2 and SED2D were used to predict bed changes in the upstream area with and without sediment release openings. Consequently, it is presented that sediment release openings decreased maximum deposition height in the upstream channel of the dam.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.629-637
• /
• 2022

It is at risk of depletion of biodiversity due to indiscriminate overfishing of ecosystems and destruction of habitats. Intensive fertilizers or development of related facilities to increase agricultural production in poor indigenous areas devastate the soil. Preservation of biodiversity is now emerging as an important issue of global human coexistence. After the Post-2020 GBF Declaration, all governance in agricultural development in indigenous agricultural areas should be supported and promoted as biodiversity conservation measures. A compromise plan to reduce ecosystem development and biodiversity loss can help establish public governance policies. In this paper, a viability kernel used for viable control feedback analysis is introduced to solve conflicting economic and ecological problems in ecosystem conservation, and a mathematical model on biodiversity conservation by the viability kernel is examined. Because all species in the ecosystem are interdependent, if the balance is broken, biodiversity is depleted, which is irreversible and eventually leads to extinction. For sustainable use and harmony of biological resources, a lot of policy consideration is required, such as creative governance that can efficiently protect all species. Subsidies or tax incentives have a direct impact on biodiversity conservation. The recovery of species in a state of decreasing biodiversity can be said to be of great economic value. Biodiversity will allow indigenous producers to be proud of their unique traditional knowledge and have a positive impact on local tourism, thereby enhancing regional identity and greatly contributing to the survival and prosperity of mankind.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.113-121
• /
• 2012

A hospital is the most important infra-facility of the places which take care of people's body in social environment. There exist several environmental factors in the ways to heal the human body in hospital ward, but this study tried to look into the improvable pleasant sickroom environment with focus on light environment among the factors. In other words, this study aims at the research on proper daylight inflow into sickroom space as basic data for understanding the link between healing environment and natural lighting. In the simulation analysis through this research, this study completed the initial simulation using Autodesk Revit 2011 with focus on two types of individual multi-bed room units of the two general hospitals located in Gwangju City. This study made a simulation analysis of The two multi-bed rooms looking to the west using the weather data on Gwangju district, which is the strong point of ECOTECT2011. Conclusively, looking into the analysis of the simulation model in time of attaching the length of in & outside light shelf, the angle controlling of light shelf, the daylight factor and DA were found to show the tendency to decrease in the numerical value due to the decrease in sunlight inflow as the simulation model moved more toward the room from the window in comparison with the existing analysis of multi-bed rooms. Particularly, this study was able to read that the daylight factor and DA were more decreasing to improve at the light shelf than the existing bedrooms; conclusively, this study judges that the natural lighting simulation analysis could be helpful in improving the healing environment as basic data.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.17-25
• /
• 2013

In this paper we interpreted the changes in wind field over complex mountainous terrains. The results of our study can be applied for predicting the direction of fire spread and for establishing strategies for fire prevention. The study area is bounded by $12{\times}12$ km domains of the Samcheok's long-term ecological research (LTER) site located in the east coast, in which a large-fire had occurred from 7 to 13 April 2000. Because of the area's complex topography, we compared the result of the Weather Research and Forecasting (WRF) mesoscale model with those observed by four automated weather stations. The WRF simulation overestimated the wind speed by 5 to 8 m/s (~200%) in comparison with those from four automated weather stations. The wind directions observed by the AWSs were from various directions whereas those from WRF model were mostly west wind at all stations. Overall, the simulations by the WRF mesoscale models were not appropriate for the estimation of microscale wind fields over complex mountainous areas. To overcome such inadequacy of reproducing the wind fields, we employed the ENVI-met model over Samcheok's LTER site. In order to test the model's sensitivity with the terrain effects, experimental simulations were conducted with various initial conditions. The simulation results of the ENVI-met model showed a reasonable agreement in wind speeds (about 70% accuracy) with those of the four AWSs. Also, that the variations in wind directions agreed reasonably well with changes in terrain effect. We concluded that the ENVI-met model is more appropriate in representing the microscale wind field over complex mountain terrains, which is required to predict fire spread and to establish strategies for forest fire prevention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.179-187
• /
• 2018

In order to understand the flow of currents around Aphae Island and the surrounding Archipelago, the numerical model experiments on tidal currents and tide-induced residual currents were carried out. Dominant semidiurnal tidal currents have a reversing form and flow along the narrow channels of the archipelago. During periods of flood, currents flow from the west of Hwawon Peninsula to the archipelago to the northwest together with the currents flowing from the channels at Palgeum Island to Amtae Island and Amtae Island to Jeung Island. Ebb currents flow from the northwest archipelago to the channel of Amtae Island and Jeung Island as well as Amtae Island to Palgeum Island, further flowing south between Palgeum Island and Hwawon Peninsula. Flood currents are separated from east and west at the southern coast of Aphae Island, but flow south from both the west and east of Aphae Island to the channel found between Palgeum Island and Hwawon Peninsula at ebb. Flow speed is high between Amtae Island and Aphae Island where the flows meet and join. Lee wakes or topographical eddies are formed around the islands due to the high speed of the currents flowing along the narrow channel in the archipelago, manifesting as a tide-induced residual current. A weak cyclonic wake and anti-cyclonic eddy both exist at the west and northwestern coast of Aphae Island individually. The speed of the tide-induced residual current become slow on account of the wide littoral zone at exists around Aphae Island.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.347-353
• /
• 2017

In this study, numerical experiments were conducted to identify distribution of rising flow and flux in the East Sea of Korea, where the coastal upwelling occurs. Temperature and salinity data from CTD observations and NIFS during summer 2013 were applied to the model. Numerical experiments were carried out with different wind speed (3, 6 m/s and 9 m/s) and direction (southerly and southwesterly), which represent the most frequent in summer conditions. As a result of calculation, upwelling flow rate was found to be highest in Pohang between five coasts(Hupo, Youngduk, Pohang, Ulsan and Busan). Comparing with southerly wind conditions, the rising flow rate is about 1.5 times greater when southwesterly wind was applied. Horizontal diffusion of the upwelling area is expected to have a speed of 17~22 km/day when a 9 m/s southwesterly wind is applied. If this wind continues over one week, a cold pool will be generated by upwelling that may reach to the Ulleung area.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.35-48
• /
• 1995

To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.