• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.224-231
• /
• 2009

The improvement of cold start capability is one of the most challenging tasks to be solved for commercialization of fuel cell vehicle. In this study, cold start test and ice blocking test(IBT) of fuel cell stack were carried out under various operating conditions. This fuel cell stack can be thawed from -20$^{\circ}$C within 25s and the voltage change was found to be comprised of 4 steps; the first step is the voltage decrease by overpotential, the second step is the voltage increase by the cell temperature increase, the third step is the voltage decrease by ice blocking, and the last step is the voltage increase by thawing. Bootstrap startup was failed after shutdown at temperature under 40$^{\circ}$C because of much condensed water in the fuel cell. Quantitative estimation of cold start capability have been demonstrated by ice blocking test(IBT). In the results, it was found that cold start capability was improved double every 10$^{\circ}$C from 30$^{\circ}$C to 65$^{\circ}$C and enhanced by 30% at the condition of SR 3/4 compared to SR 1.5/2.0 and enhanced by 20% with dry purge condition compared to with RH 50% purge condition.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.208-215
• /
• 2009

PEMFC stack power output is needed to be around 100 kW to meet the requirements of automotive application and scaling-up the active area of the stack cells will allow a higher power. In the case of scaling-up the active area of cells, it is difficult to obtain uniform in-plane internal conditions such as temperature, relative humidity and stoichiometry of the feed gas. These ununiformity with the location in the cell would affect both the performance and durability of the stack, so it is important to understand phenomena in the cell for improving them. In this study, the current density, electrochemical resistance and performance distribution measurement was performed to understand the ununiformity in a single cell using in-situ method; (1) Current Density Distribution (CDD) Device and (2) Segmented Cell Fixture. The influence of location of feed gas on the performance of a single cell was experimentally measured and discussed by using a segmented single cell which was composed of 8 compartments. The correlation between the location and performance in a single cell was discussed by these two tools and it was extended between the local characterization and the durability in a MEA by comparing the used cell with a fresh one. It was also studied in terms of electrochemistry by Electrochemical Impedance Spectroscopy.

• KIEAE Journal
• /
• v.17 no.2
• /
• pp.13-20
• /
• 2017

Meteorological data is one of the important factors in the calculation of building energy demand. The purposes of this study are to review the limitations of the typical meteorological data of ECO2 program and to create the new typical meteorological data and then analyze the building energy demands for additional regions which are not included in the existing 13 region in the ECO2 program. The extended typical meteorological data to a total of 33 regions were based on IWEC(International Weather for Energy Calculations) data files and were created in the form applicable to the building energy efficiency rating certification system. As a result of comparing the heating energy demands of a representative region with the surrounding regions in each of five regions in Korea, the variance of Cv(RMSE) ranged from 36% to 344% and MBE ranged from -32% to 190% for the whole regions. This suggests that the difference of heating energy demand may vary greatly depending on the region where the meteorological data is used and the meteorological data of more detailed regions is needed for reliable calculation of building energy demand.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2004.11a
• /
• pp.5-27
• /
• 2004

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.44 no.9
• /
• pp.22-32
• /
• 2015

• Korean Architects
• /
• s.594
• /
• pp.46-53
• /
• 2018

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.285-291
• /
• 2018

The purpose of this research lies in analyzing the corelation between the eco-friendly management activities of a cosmetic company and customers' decision making in terms of purchase. In this research, 355 copies of questionaire from general customers were analyzed using the statistic package program of SPSS v.18.0. Based on the research analysis, the attributes of eco-friendly management activities can be categorized into three factors such as 'energy saving', 'contribution to communities', and 'environment-oriented services' and have the statistically meaningful positive influence on the three factors of customers' decision making; 'purchasing intention', 'assessment of purchase', and 'repurchase'. This research shows that the eco-friendly management activities of a cosmetic company is an important factor for its successful marketing strategy. This research has a significance in that it has studied the eco-friendly management activities of a cosmetic company through stereotyping. We can expect successful marketing effect if a cosmetic company uses eco-friendly products, information, and services in its eco-friendly marketing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1253-1260
• /
• 2013

Eco-town development projects have often prevailed throughout the World to initiate the new form of sustainable development plans. As a future development type, the eco-town project shares underlying notions with sustainable development, which has been recently revised into a wider definition; (i) energy efficiency, (ii) climate adaptation, and (iii) socio-economic development. There are four types of eco-town projects based on its characteristics and aims depending on project sites, regions, or countries. This paper tried to demonstrate the types of eco-town projects and summarizes its strategy plans from each type. Many eco-town cases can be placed in one of types, however there cannot be strictly discrete classification by its complicated and composite characteristics of them. In conclusion, the analyzed types can be a useful strategy plan for pursuing further eco-town projects in domestic as well as in international regions.

• International Journal of Advanced Culture Technology
• /
• v.12 no.1
• /
• pp.254-261
• /
• 2024

Among eco-friendly energy, solar energy is one of the renewable energy sources that is developing in the spotlight in many countries. In line with this, the Korean government and local governments are carrying out projects to provide subsidies for the distribution of household solar power, raising the spread of household solar power and awareness. However, due to the lack of research on consumer perception of household solar power, this study investigated the perception of household solar power from 2015 to 2022 by setting the central word as solar power. As a result, 2016 had the highest number of collections, and when the top 50 words for each year were analyzed, it was confirmed that words related to the installation and maintenance of household solar power dominated. And through CONCOR analysis, a total of four were derived: solar energy recognition, renewable and eco-friendly energy recognition, solar government policies, solar companies, and perceptions of households. Through emotional analysis, it was confirmed that 2021 had the most positive data. As a result, consumer perception of household solar power is positive based on what was mentioned above, but research on how to use negative opinions on waste control and installation and maintenance should be conducted.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.57-64
• /
• 2020

The water-gas shift reaction for the compact reformer was carried out at a gas hourly space velocity of 72,152 h^-1 over the Cu-Nb-CeO₂ catalysts prepared by co-precipitation method. In order to investigate the effect of Nb₂O₅ promotion over a Cu-CeO₂ catalyst, the Nb₂O₅ loading amount was systematically changed from 0 to 5 wt.%. Among the prepared catalysts, the Cu-Nb-CeO₂ (1%) catalyst showed the highest catalytic activity (CO conversion=61% at 400℃) as well as 100% CO₂ selectivity. The high activity and stability of Cu-Nb-CeO₂ (1%) catalyst are correlated to high Brunauer-Emmett-Teller surface area, small metallic Cu crystallite size, and enhanced redox property.