• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2513-2516
• /
• 2012

This study examined the effects of the epoxidized castor oil (ECO) and $Al_2O_3$ content on the thermal stability and fracture toughness of the diglycidylether of bisphenol-A (DGEBA)/ECO/$Al_2O_3$ ternary composites using a range of techniques. The thermal stability of the composites was decreased by the addition of ECO and $Al_2O_3$ nanoparticles. The fracture toughness of the composites was improved significantly by the addition of ECO and $Al_2O_3$ nanoparticles. The composite containing 3 wt % $Al_2O_3$ nanoparticles showed the maximum flexural strength. Scanning electron microscopy (SEM) revealed tortuous cracks in the DGEBA/ECO/$Al_2O_3$ composites, which prevented deformation and crack propagation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.231-232
• /
• 2013

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1255-1259
• /
• 2020

This paper aims to investigate the microstructural evolution and mechanical properties of hot-deformed AlMg4 alloys with Mn, Fe, and Si as the main impurities. For this purpose, solidification behavior and microstructural evolution during hot-rolling and heat-treatment processes are investigated by using theoretical calculations and experimental characterization. The crystallization and morphological transformation of intermetallic Al₃Fe, Al₆Mn, and Mg₂Si phases are revealed and discussed in terms of the variation in chemical composition. Following a homogenization heat-treatment, the effect of heat treatment on the intermetallic compounds is also investigated after hot-rolling. It was revealed that the Mg₂Si phase can be broken into small particles and spherodized more easily than the Al₃Fe intermetallic phase during the hot-rolling process. For the Mn containing alloys, both yield and ultimate tensile strength of the hot-rolled alloys increased from 270 to 296 MPa while elongation decreased from 17 to 13%, which can be attributed to Mn-containing intermetallic as well as dispersoid.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.273-278
• /
• 2015

${\alpha}-Al_2O_3$ was synthesized by solvothermal synthesis using ${\alpha}-Al_2O_3$ seed, precursor of fine boehmite (Al(OOH)) or gibbsite ($Al(OH)_3$), and 1, 4-butanediol solvent. The seed content and precursor type were selected as variables in order to synthesize ${\alpha}-Al_2O_3$. The formation time of ${\alpha}-Al_2O_3$ was reduced and the size of the particles was decreased with addition of the seed. When the seed content was increased, the size of the synthesized ${\alpha}-Al_2O_3$ was reduced. Morphologies of the as-synthesized ${\alpha}-Al_2O_3$ with ${\alpha}-Al_2O_3$ seed were polyhedron-shaped, while the shape was plate-like or polyhedral without the seed, depending on the additives or the average particle size of the boehmite precursor. The aggregation of as-synthesized ${\alpha}-Al_2O_3$ from boehmite was smaller than that from gibbsite. As-synthesized ${\alpha}-Al_2O_3$, with 140 nm size, was obtained by using the seed and boehmite precursor.

• 한국주조공학회지
• /
• 제31권2호
• /
• pp.60-65
• /
• 2011

Molten magnesium alloys and magnesium products are easily oxidized and burned when they are exposed to high temperature for manufacturing process and by accident. In order to solve these problems, CaO addition in magnesium alloys has been developed. The ignition resistance of CaO added Mg-3Al, Mg-6Al, and Mg-9Al Eco-Mg alloys were investigated in comparison with those of magnesium alloys without CaO. The ignition resistance was examined by three methods : DTA, furnace chip ignition test, and torch ignition test. DTA was carried out for obtaining quantitative ignition temperature data with respect to specimen geometry and test environment; the furnace ignition test for burr and chip ignition temperature data; and the torch test for ignition temperature data for manufactured products. The ignition resistance of magnesium alloys under all conditions greatly increased by CaO addition.

• 한국주조공학회지
• /
• 제30권4호
• /
• pp.147-150
• /
• 2010

알루미늄 합금의 미세조직 개량을 위한 목적으로 사용되는 Al-Ti-B 합금계의 미세화제는 재활용 과정에서 붕소(B)의 농축(Agglomeration) 문제 및 Zr, Si, Cr 등을 함유하는 합금에서 미세화 효과가 급격히 감소하는 Poisoning effect 등이 지적되어 왔다. 최근에는 이를 대체할 수 있는 Al-Ti-C 합금계의 미세화제에 대한 연구가 활발한데 이는 TiC가 용탕 내에서 ${\alpha}$-Al의 핵생성처로 직접 작용하는 점에 착안한 것이다. 한편, 이들 Al-Ti-B, Al-Ti-C 계의 미세화제는 그 제조공정에서 $K_2TiF_6$를 이용함에 따라 불소함유 유해가스를 배출하여 환경 문제를 야기하고, 이를 포집/정화하기 위한 추가설비를 요구하게 된다. 따라서 대기 환경 오염 및 경제성 측면에서 유리한 미세화제의 친환경 제조기술에 대한 개발이 필요한 시점이다. 본 연구에서는 $K_2TiF_6$를 사용하지 않고 용탕 내의 자발적 반응을 이용하여 환경 및 경제적 측면에서 유리한 Al-Ti-C 미세화제를 개발하고자 하였다. A3003 합금을 대상소재로 하여 개발된 Al-Ti-C 미세화제와 상용 Al-Ti-B 미세화제의 미세화 도달시간 및 fading 발생 등을 비교하였다. 본 연구를 통하여 개발된 Al-8.6Ti-0.025C 미세화제는 상용 Al-Ti-B 미세화제 보다 적은 첨가량에도 유사한 미세화 성능을 나타내었으며 용탕 유지시간 100분까지도 fading이 발생하지 않는 것을 확인하였다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.499-503
• /
• 2012

The present study is intended to comparatively investigate the changes in microstructure and tensile properties at room and elevated temperatures in commercial AM50(Mg-5%Al-0.3%Mn) and 0.3 wt%CaO added ECO-AM50 alloys produced by permanent mould casting. The typical microstructure of AM50 alloy was distinctively characterized using two intermetallic compounds, ${\beta}(Mg_{17}Al_{12})$ and $Al_8Mn_5$, along with ${\alpha}$-(Mg) matrix in an as-cast state. The addition of a small amount of CaO played a role in reducing dendrite cell size and quantity of the ${\beta}$ phase in the AM50 alloy. It is interesting to note that the added CaO introduced a small amount of $Al_2Ca$ adjacent to the ${\beta}$ compounds, and that inhomogeneous enrichment of elemental Ca was observed within the ${\beta}$ phase. The ECO-AM50 alloy showed higher hardness and better YS and UTS at room temperature than did the AM50 alloy, which characteristics can be mainly ascribed to the finer-grained microstructure that originated from the CaO addition. At $175^{\circ}C$, higher levels of YS and UTS and higher elongation were obtained for the ECO-AM50 alloy, demonstrating that even 0.3 wt%CaO addition can be beneficial in promoting the heat resistance of the AM50 alloy. The combinational contributions of enhanced thermal stability of the Ca-containing ${\beta}$ phase and the introduction of a stable $Al_2Ca$ phase with high melting point are thought to be responsible for the improvement of the high temperature tensile properties in the ECO-AM50 alloy.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2008년도 추계학술발표회 발표논문집
• /
• pp.510-514
• /
• 2008

본 연구에서는 전극의 특성에 따른 돈사유래 축산폐수의 ECO 공법에 의한 처리특성을 평가하기 위해 ECO 시스템 모듈내 Fe-Fe 및 Al-Al 계열의 용해성 전극과 Al-SUS, Ir-SUS 등 불용성 전극을 대상으로 5$\sim$20mA/cm$^2$의 전류밀도하에서 축산폐수내 유기물 및 영양염류의 제거특성을 평가하여 다음과 같은 결론을 얻을 수 있었다. 1. 전기응집산화에 의한 축산폐수의 처리시 수중 유기물질 및 영양염류의 제거효율은 전류밀도의 증가에 비례하여 증가한다. 2. 불용성 전극조합 및 불용성-용해성 전극조합은 전류밀도가 높을수록 수중 유기물 및 오염물질 제거효율이 안정되고, 용해성 전극은 15mA/cm$^2$ 이하의 저 전류밀도의 조건하에서 전류밀도의 증가에 따라 안정된 제거효율 향상을 기대할 수 있다. 3. 불용성전극 조합인 Ir-SUS 전극조합을 사용하여 축산폐수를 처리할 경우 COD$_{Mn}$ 제거효율을 약 10% 향상시킬 수 있으며, TN 20mA/cm$^2$에서 Al-Al 전극조합과 TP 15mA/cm$^2$ 이하에서 Fe-Fe 전극조합은 제거효율이 저하되는 경향이 나타난다.

• 대한화학회지
• /
• 제64권3호
• /
• pp.153-158
• /
• 2020

With the recent popularity of mobile devices, the demand for lithium-ion batteries is increasing. In this study, the surface treatment process for the development of the Al (aluminum) lead tab for positive electrode, a key component of the pouch-type lithium-ion battery, was investigated. Anodizing and sealing processes were tested as surface treatment techniques. It was found that only a sealing process is needed to obtain sufficient adhesive strength. In the present study, an adhesive strength of 17 N/12 mm was achieved by degreasing and etching pretreatment, followed by a sealing process of 10 min duration. This adhesive strength was greater than that achievable using Cr (chromium) surface treatment. Using various surface analysis techniques, the shape and composition of the surface before and after being subjected to the surface treatment were compared and analyzed. The results of this study are expected to contribute to the development of an eco-friendly lead tab.

• 한국미생물·생명공학회지
• /
• 제17권2호
• /
• pp.160-164
• /
• 1989

알카리성 Bacillus sp. AL-8의 알카리성 amylase 유전자를 포함하는 5.7Kb의 EcoRI 단편을 pUB 110을 vector로 하여 amylase를 생산하지 못하는 B. subtilis sta-1에서 발현시켰다. 재조합 plasmid pMB802와 pMB809는 숙주세포인 B. subtilis에서 매우 안정하게 유지되었으며 amylase 생산이 공여균 주에서 보다 1.8배 증가하였다. 형질전환주에서 생산된 amylase는 공여균주와 같은 효소적 성질을 나타내었다. 5.7Kb 단편을 E. coli에 subcloning한 결과 3.7Kb의 EcoRI 단편에 알카리성 amylase 유전자가 존재하였다.