• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.318-324
• /
• 2016

Commercial split beam echosounder (ES70) installed on a krill fishing vessel was calibrated in order to utilize it in estimating biomass of Antarctic krill (Euphausia superba). The method of calibration was to analyze the difference between the bottom backscattering strength of the commercial split beam echosounder (i.e. ES70) and the scientific echosounder (i.e. EK60) at one of transects near South Shetland Islands designated by CCAMLR. 38 kHz and 120 kHz were used for the calibration, and krill swarm signal levels obtained from multi frequencies, was examined to verify the calibration result. The analysis result indicated possibility of calibration by bottom backscattering strength, since the proportion of krill swarm signals within 2 dB < $S_{V\;120\;kHz-38\;kHz}$ < 12 dB (i.e. a common $S_{V\;120\;kHz-38\;kHz}$ range of 38 kHz and 120 kHz to be an indicator of Antarctic krill) over the total acoustic signals were 26.95% and 92.04%, respectively before and after the calibration.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.133-141
• /
• 2023

Accurate measurement of seafloor topography plays a crucial role in developing marine industries such as maritime safety, resource exploration, environmental protection, and coastal management. The seafloor topography is constructed using side scan sonar (SSS) and single beam echosounder (SBES) or multibeam echosounder (MBES), which transmit and receive ultrasound waves through a device attached to a marine survey vessel. However, the use of a sonar system is affected by noise pollution areas, and the single beam has a limited scope of application. At the same time, the multibeam is mainly applicable for depth observation. For these reasons, it is difficult to determine the boundaries and areas of seafloor topography. Therefore, this study proposes a method to improve the backscatter data of multibeam echosounder, which has a relationship with the seafloor quality, by using digital image processing to classify the shape of the underwater surface.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.369-376
• /
• 2014

I provide an overview of the application of hydroacoustic methods in South Korea to understand the current research status in relation to fisheries acoustics and to determine which areas require further study. One main purpose for using a scientific echosounder, a representative tool using the hydroacoustic method, is to evaluate the abundance of fisheries resources. Thus, two representative methods for abundance estimation are described. The history of fisheries acoustics worldwide is also summarized.

• ALGAE
• /
• v.23 no.1
• /
• pp.83-90
• /
• 2008

Eelgrass beds are very productive and provide nursery functions for a variety of fish and shellfish species. Management for the conservation of eelgrass beds along the Korean coasts is critical, and requires comprehensive strategies such as vegetation mapping. We suggest a mapping method to spatial distribution and quantify of eelgrass beds using a digital echosounder. Echosounding data were collected from the northeast part of Kwangyang Bay, on the south of Korea, in March, 2007. A transducer was attached to a boat equipped with a DGPS. The boat completed a transect survey scanning whole eelgrass beds of 11.7 km2 with a speed of 1.5-2 m s-1 (3-4 knot). The acoustic reflectivity of eelgrass allowed for detection and explicit measurements of canopy cover and height. The results showed that eelgrass bed was distributed in depth from 1.19 to 3.6 m (below MSL) and total dry weight biomass of 4.1 ton with a vegetation area of 4.05 km2. This technique was found to be an effective way to undertake the patch size and biomass of eelgrass over large areas as nondestructive sampling.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.71-78
• /
• 2008

Nowadays, echosouder has been widely used in sea survey and ship navigation. By utilizing echosounder, we can measure the depth of water reliability. However, the problem is that depth update rate drops remarkably when sea bottom is shallow or steep/rugged. Therefore, we have developed an optimized algorithm to process tranducer's soundwave signals at high-speed and minimize error. Processing algorithm is implemented by the latest DSP processor (TMS320F2812), consequently, high-speed data processing can be achieved. Performance of the proposed algorithm is verified by experiments and compared with existing algorithms. It has shown that our method results in higher precision in water depth measurement than other methods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.39-49
• /
• 2019

Acoustics are increasingly regarded as a remote-sensing tool that provides the basis for classifying and mapping ocean resources including seabed classification. It has long been understood that details about the character of the seabed (roughness, sediment type, grain-size distribution, porosity, and material density) are embedded in the acoustical echoes from the seabed. This study developed a sophisticated yet easy-to-use technique to discriminate seabed characteristics using a split beam echosounder. Acoustic survey was conducted in Tongyeong waters, South Korea in June 2018, and the verification of acoustic seabed classification was made by the Van Veen grab sampler. The acoustic scattering signals extracted the seabed hardness and roughness components as well as various seabed features. The seabed features were selected using the principal component analysis, and the seabed classification was performed by the K-means clustering. As a result, three seabed types such as sand, mud, and shell were discriminated. This preliminary study presented feasible application of a sounder to classify the seabed substrates. It can be further developed for characterizing marine habitats on a variety of spatial scales and studying the ecological characteristic of fishes near the habitats.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.242-252
• /
• 2023

In this study, we aimed to determine the seasonal distribution and biomass of fish in Samcheok marine ranching area (MRA) of Republic of Korea using the scientific echosounder. Fish trap and gillnets were used to identify fish species in the survey area, and dB-difference method was used to estimation the spatio-temporal distribution and density of fish. The results showed that the dominant species in Samcheok marine ranching area were Chelidonichthys spinosus, Sebastes inermis, Hexagrammos otakii and Tribolodon hakonensis. The spatio-temporal distribution of fish showed that fish had a relatively higher distribution at night than during the day. In addition, the density of fish by season was highest at night in July at 34.22 g/m² and lowest in April at 0.42 g/m².

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.56-68
• /
• 2023

A system that extracts seabed topographic information by simultaneously and continuously observing the horizontal position and water depth in the sea by combining a single beam echosounder and GNSS was constructed. By applying the developed system to actual measurements of small-scale sea areas, the effectiveness of bathymetry and sea-floor topographic data acquisition using GNSS and echosounder was examined. By using the developed outdoor program DS-NAV and indoor program DS-CAD and applying the tide level data at the time of actual measurement of the target sea area, it was possible to derive bathymetry results based on the datum level i.e. approximate lowest low water level(A.L.L.W). By using the developed outdoor program DS-NAV and indoor program DS-CAD and applying the tide level data at the time of actual measurement of the target sea area, it was possible to derive the results of bathymetric survey based on the datum level. From database built through the actual measurement. it was possible to create 3D model of the sea-floor topography and extract cross-sections. The results of this study are expected to be economically useful for extracting seabed topographical information from small sea areas or in dredging sites for offshore construction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.111-116
• /
• 2007

This study is aimed to analyze the accuracy of depth information of reservoir using the robot-ship equipped with GPS and echosounder. The accuracy of depth measurements by sounding data was analyzed according to change of robot-ship's speed in the water. The field experiment results showed that as robot-ship's speeds were slow, accuracy of sounding data were increased. Until Robot-ship's speed was up to 5 km/hr, the accuracy of sounding data were included reliable section of normal distribution.

• KCID journal
• /
• v.17 no.2
• /
• pp.49-56
• /
• 2010

This study was carried out to survey for morphological change of lower tidal flat near Byunsan-Gosapo beach using single-beam echosounder and sound velocity profiler. Since October 2009 in the center of the region, the erosion occurred about 10~50cm, while either side of the study area is little change. Erosion occurred at the beach, each beach area in the southwest area rather than further accumulation occurred sandbank formed. Observed in the study area near the center of the erosion is the result of ongoing changes that were temporarily due to seasonal changes is not clear. However, the northwestward waves were expected to be a major source of erosion. Because of this, continue to observe the terrain and the local ocean circulation studies will be required.