• 수산해양기술연구
• /
• 제26권1호
• /
• pp.14-19
• /
• 1990

동지나해의 초음파산란층에 대한 기초적 연구로서, 산란층의 주야간에 대한 수직이동상태와 Echo 신호의 변동특성에 관하여 검토한 결과, 수심 20m~80m에 형성된 상\ulcorner하한의 수온차가 약 11$^{\circ}C$인 수온약층부에서 일몰 전에는 산란층의 Echo 신호가 뚜렷하지 않았으나, 일몰 후부터 수심 35m~45m 구간에서 산란층이 강하게 나타내기 시작하여, 시간이 경과할수록 수직적으로 신장되면서 표층을 향해 점차 부상하는 경향을 나타내었다. 한편, 일출 전에 초음파산란층의 상부는 수온약층의 상부까지 부상하였고, 또 전 수심에서 상당히 강한 Echo 신호가 돌발적으로 출현하는 현상이 확인되었으며, 이것은 저층에 분포하고 있던 어군이 부상하여 발생한 것으로 생각된다. 일출 후에는 산란층이 급속히 하강함과 동시에 Echo level도 급격히 낮아지는 경향을 나타내었고, 그 하강속도는 일몰 후 산란층의 부상속도에 비해 현저하게 빠른 현상을 나타내었으며, 일출전후 약 30분간에 가장 강한 Echo 신호가 관측되었다. 또 Echo 신호의 진폭빈도분포는 일몰전에는 전 수층에 걸쳐 Echo level이 매우 낮으므로 낮은 level에 많이 집중되는 지수분포형을 나타내고, 일출전후에는 Echo 신호가 높은 level에 많이 집중되는 정규분포형을 나타내었다.

• 한국측량학회지
• /
• 제18권4호
• /
• pp.343-350
• /
• 2000

본 연구는 해안 방파제 공사에서 사석의 투하방향 및 물량을 DGPS ＆ Echo-Sounder를 이용하여 확인하고 앞으로의 사석투하물량의 계산에 대하여 다루고 있다 방파제 공사에 있어서 사석 투하는 제방 중심선에 대하여 부표를 띄어놓고 이루어지며, 사석 투하를 실시한 후 측간, 측심연 잠수부 등에 의하여 사석의 투하 형태 및 방향에 대한 확인 작업을 실시하게 된다. 그러나 사석 투하 지역전체에 대하여 이와 같은 방법으로 데이터를 취득하고 투하물량을 산정 하는 것은 많은 시간과 인원을 필요로 하며, 정확도에 있어서도 효율적인 방법이라 할 수 없다. 이러한 문제에 대한 해결 방법으로 본 연구에서는 DGPS ＆ Echo-Sounder를 이용하여 사석투하 지역에 대한 측량을 실시하고 사석 투하깊이, 방향 및 물량 등을 계산하여 사석 투하공정을 확인하였으며, 앞으로의 투하 물량에 대한 계산을 실시함으로서 DGPS & Echo-Sounder에 의한 효율적 사석투하 관리방법을 제시하고자 하였다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.367-369
• /
• 2002

We have designed ramp profile excitation pulse based on the Shinnar-Le Roux (SLR) algorithm. The algorithm provides many advantages to pulse designers. The first advantage is the freedom of deciding the amplitudes, frequencies, and ripple sizes of stopband, passband, and transition band of pulse profile. The second advantage is the freedom of deciding the pulse phase, more specifically, minimum phase, linear phase, maximum phase, and any phase between them. The minimum phase pulse is the best choice in the case of 3D TOF, because it minimizes the echo time, which implies the best image quality in the same MR examination condition. In addition, the half echo technique is slightly modified in our case. In general, using the half echo technique means that the acquired data size is half and the rest part can be filled with complex conjugate of acquired data. But in our case, the echo center is just shifted to left, which implies the reduction of echo time, and the acquired data size is the same as the one without using the half echo technique. In this case, the increase of right part of data leads to improvement of the resolution and the decrease of left part of data leads to decrease of signal to noise ratio. Since in the case of 3D TOF, the signal to noise ratio is sufficiently high and the resolution is more important than signal to noise ratio, the proposed method appears to be significantly affective and gives rise to the improved high resolution angiograms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.416-418
• /
• 2006

In this paper, a new acoustic echo cancellation approach based on the DUET algorithm and scaling factor estimation is proposed to solve the scaling ambiguity in case of blind separation based acoustic echo cancellation in a noisy environment. In hands-free full-duplex communication system. acoustic noises picked up by the microphone are mixed with echo signal. For this reason, the echo cancellation system may provide poor performance. For that purpose, a degenerate unmixing estimation technique, adjusted in the time-frequency domain, is employed to separate undesired echo signals and noises. Also, since scaling and permutation ambiguities have not been solved in the blind source separation algorithm, kurtosis for the desired signal selection and a scaling factor estimation algorithm are utilized in this rarer for the separation of an echo signal. Simulation results demonstrate that the proposed approach yields better echo cancellation and noise reduction performances, compared with conventional methods.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.77-82
• /
• 2004

This study deals with the estimation of dredged soil-quantity using DGPS＆Echo-Sounder method. In measurement of topography, surveyors have been surveying the depth with rod and sounding lead. This method, however, is not effective because of long time and a lot of human power, in addition it is incorrect. This paper has studied on the solution of those problems using DGPS＆Echo-sounder data to calculate the dredged soil-quantity. This paper says the effective and economical methods using DGPS＆Echo-Sounder data there.

• 음성과학
• /
• 제9권3호
• /
• pp.17-24
• /
• 2002

The goal of this research is the real-time implementation of an AEC (Acoustic Echo Canceller) using the floating-point digital signal processor of TMS320C31. We employ an FIR-type adaptive filter with the conventional NLMS (Normalized Least Mean Square) algorithm for the adaptation of filter coefficients. We program and optimize the system in the assembler level to make it run in real-time. With 8 kHz sampling rate, the implemented AEC requires $46\;\mu$sec and $77\;\mu$sec computational time per sample for 128-and 256-tap filter, respectively. It corresponds to 37% and 62% of maximum computational ability of TMS320C31 DSP.

• 한국수산과학회지
• /
• 제51권2호
• /
• pp.178-186
• /
• 2018

A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.

• 음성과학
• /
• 제15권1호
• /
• pp.75-83
• /
• 2008

The interior of an automobile is a very noisy environment with both stationary cruising noise and the reverberated music or speech coming out from the audio system. For robust speech recognition in a car environment, it is necessary to extract a driver's voice command well by removing those background noises. Since we can handle the music and speech signals from an audio system in a car, the reverberated music and speech sounds can be removed using an acoustic echo canceller. In this paper, we implement an acoustic echo canceller with robust double-talk detection algorithm using TMS-320C6711 DSK. First we developed the echo canceller on the PC for verifying the performance of echo cancellation, then implemented it on the TMS320C6711 DSK. For processing of one speech sample with 8kHz sampling rate and 256 filter taps of the echo canceller, the implemented system used only 0.035ms and achieved the ERLE of 20.73dB.

• 한국음향학회지
• /
• 제19권7호
• /
• pp.15-22
• /
• 2000

본 연구에서는 수중표적의 반사신호를 재현하기 위한 공간적 하이라이트 분포처리 알고리듬을 제안한다. 제안된 알고리듬은 입사되는 핑펄스의 각도에 따라 가변적인 불연속 하이라이트와 표적내부 및 특정위치의 하이라이트를 신호 입사각에 따라 분포시켜 합성한다. 완성된 UTAHID 모델은 핑펄스의 입사각도 및 펄스폭에 따라 첨두치 표적강도, 에너지 표적강도, 에코신장효과, 표적 시간분산 손실 및 포락선의 불규칙성 등을 각종 모의실험으로 타당성을 확인하였으며, 이는 능동소나의 표적 반사신호 합성에 관련된 각종 실제 시스템에 효율적으로 적용될 수 있다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.467-470
• /
• 2003

This study tries to introduce the precision measurement of 3-dimensional terrain of reservoir using Echo Sounder and RTK-GPS which is unprecedented in domestic. In this study, to introduce the way to produce the plane figure, the cross section and data of underside reservoir by constructing the 3-dimensional terrain models using 3-Dimensional data gained by measurement.