• 한국운동역학회지
• /
• 제24권2호
• /
• pp.131-138
• /
• 2014

The purpose of this study was to analyse the effect of the drop height on lower extremity and lower back kinematics and kinetics during drop landing with the use of raised heel insole. Furthermore we investigated the change that occurred in our body. Joint ROM, eccentric work and contribution to total work were calculated in 11 male college students performing drop landing with 8 motion analysis cameras and 1 forceplate. The result were as follows. First, the ROM and eccentric work were increased in all joints with the increase of the drop height. Second, the ankle ROM and eccentric work were decreased with the use of the insole. Third, the use of the lower back was increased as the use of the ankle decreased with the insole. Based on these results, we can infer that putting on the insole may contribute to chronic injury. We recommend not to use the insole during physical activity.

• 한국전문물리치료학회지
• /
• 제12권3호
• /
• pp.94-100
• /
• 2005

Eccentric muscle contraction is more effective than concentric and iosmetric muscle contraction in increasing muscle strength. Also, eccentric or concentric-eccentric training has greater effective in neural activation and muscle hypertrophy than concentric training. In some study, eccentric exercises have been shown to reduce pain and improve function on Achilles tendinopathy. The purpose of this study was to evaluate the effect of eccentric isokinetic exercise in a patient with dislocation of the tarsometatarsal joint by traffic accident. After eccentric isokinetic training, peak torque, average work, and average power were increased. Also, the patient was fully weightbearing with a pain free normal gait thus making good recovery.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.260-265
• /
• 2002

There are many methods for muscle strengthening. Muscle strengthening with eccentric contraction work is the best way by researcher's report. Also, eccentric contraction need proper resistance for muscle strengthening. Combination of isotonic in PNF is a muscle strengthening method with manual resistance. It makes concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction with continually and without muscle relaxation. Combination isotonic technique use with PNF pattern. Therefore, it will make development and increasing of active control motion, coordination, actual range of motion, strengthen and functional training in eccentric control of movement. Concentric contraction have the 3rd lever system and eccentric contraction have the 2nd lever system with combination of isotonic. Serial concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction make strong SEC and PEC. It will be increase elasticity of SEC, PEC and contractile components either.

• 한국운동역학회지
• /
• 제23권2호
• /
• pp.159-167
• /
• 2013

The purpose of this study was to evaluate the gender differences on gait pattern and the kinetics on lower extremities according to the different gait speed. Ten collegiate male students (age : $23.80{\pm}2.94$ yrs, height : $179.40{\pm}5.04$ cm, weight : $66.57{\pm}5.64$ kg) and ten female students (age : $23.40{\pm}2.91$ yrs, height : $166.06{\pm}5.61$ cm, weight : $53.76{\pm}2.75$ kg) participated in this study. To investigate the role, the ratio of the use, and the effectiveness of each joint during gait, we examined the joint work and the contribution to total work. The results of this study were as follows: First, gait pattern was not differ between male and female, hip joint ROM increased with the increase of gait speed both male and female. Second, the eccentric work of the ankle joint decreased with the increase of the gait speed both male and female, on the other hand increased on the knee joint. Third, in the result of the contribution to total eccentric work, male in both the two gait speed was the biggest on the hips joint. However, female in normal gait speed was the greatest on the ankle joint, was the most on the knee joint in the fast gait speed. Forth, the concentric work on the ankle and hip joint increased with the increase of gait speed both male and female. Fifth, in the result of the contribution to total concentric work, there is no difference in the male both the two gait speed, however decreased in the female on the knee joint with the increase of the gait speed, on the other hand increased on the ankle joint.

• 산업기술연구
• /
• 제22권A호
• /
• pp.229-240
• /
• 2002

This paper is an experimental and numerical work of Investigating the bearing capacity of shallow foundation of rubble mound under eccentric loads. Parametric centrifuge model tests at the 50g level environments with the model footings in the form of strip footing were performed by changing the loading location of model footing, relative density and materials for ground foundation. For the model ground, crushed rock sampled from a rocky mountain was prepared with a grain size distribution of having an identical coefficient of uniformity to the field condition. Model ground was also prepared with relative densities of 50 % and 80 %. For loading condition, model tests with and without eccentric load were carned out to investigate the effect of eccentric loads and a numerical analysis with the commertially available software of FLAC was performed. For numerical estimation with FLAC, the hyperbolic model of a nonlinear elastic constitutive relationship was used to simulate the stress-stram constitutive relationship of model ground and a series of triaxial compression test were carried out to find the parameters for this model Test results were analyzed and compared with Meyerhof method (1963), effective area method based on the limit equilibrium method, and a numerical analysis with FLAC.

• 소성∙가공
• /
• 제7권2호
• /
• pp.177-185
• /
• 1998

The kinematically admissible veolcity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric lane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal one are determined by the minimization of the plastic work and that the curvature of the extruded products increase with the eccentricity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.250-253
• /
• 1998

The kinematically admissible velocity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric plane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal zone are determined by the minimization of the plastic work and that the curvature of the extruded products increases with the eccentricity.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1721-1730
• /
• 2000

An eccentric degenerated shell element with geometric non-linearity for the precise and efficient analysis of stiffened shell structures is developed. To deal with the eccentricity, we define the e ccentric shell and the master shell that constitute one combined shell. It is assumed that the sections remain plane after deformation. The internal force vector and the tangent stiffness matrix based on the virtual work principle in the natural coordinate system are derived. To enhance the robustness of the element, assumed strain method for transverse shear and membrane strains is used. Through numerical experiments the effectiveness of the proposed element is demonstrated.

• Structural Engineering and Mechanics
• /
• 제73권1호
• /
• pp.83-95
• /
• 2020

In this work, a mathematical model of beam-column system carrying a double eccentric end mass system is investigated, and solved analytically based on the exact solution analysis. The model considers the case in which the double eccentric end mass is a rigid storage tank containing fluid. Both Timoshenko and Bernoulli-Euler beam bending theories are considered. Equation of motion, general solution and boundary conditions for the present system model are developed and presented in dimensional and non-dimensional format. Several important non-dimensional design parameters are introduced. Symbolic and/or explicit formulae of the frequency and mode shape equations are formulated. To the authors knowledge, the present reduced closed form symbolic and explicit frequency equations have not appeared in literature. For different applications, the results are validated using commercial finite element package, namely ANSYS. The beam-column system investigated in this paper is significant for many engineering applications, especially, in mechanical and structural systems.

• The Journal of Korean Physical Therapy
• /
• 제13권1호
• /
• pp.19-31
• /
• 2001

The twenty one individuals with total knee replacement who were admitted to Kang-Dong Hospital for comprehensive physical therapy were studied in order to demonstrate the effectiveness of an isokinetic test program using the Cybex 6000 machine. The subjects were divided into three groups with the isometric exercise group receiving isometric exercise. the isokinetic eccentric exercise group, and isokinetic eccentric exorcise group receiving isokinetic exercise(eccentric. concentric) to knee flexors and extensors muscles for a six weeks period using the Cybex 6000. The results were follow :1 . The peak torque was increased significantly in the flexors and extensors of the isokinetic conccentric exorcise among three groups(p<.05). 2. The progress of peak torque was increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<.05). 3. The total work was more increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<.05). 4. The progress of total work was more increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<;.05). 5. The ratio of endurance was not increased significantly in all three groups. 6. The extensors in the peak torque was likely to recover rapidly than the flexors. 7.The average R.O.M in the pre-exercise and post-exercise was not different significantly in all three groups. According to the above results, In the muscle strength recovery for total knee replacement patients, isokinetic concentric exercise group was significantly greater than the isokinetic eccentric and isometric exercise groups after a six weeks training.