• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.391-396
• /
• 2008

This study was carried out to help restore and spread broaden the consumption of Chungtaejeon, a our traditional tea, Chungtaejeon in Korea, and as well as to gather the basic data on Chutaejeon tea. We have also compared the various ingredients components and physiological activities of Chungtaejeon tea extracts with that of green tea extracts. According to the results, the total phenol contents in of the Chungtaejeon and green tea extracts were 90.56 and 98.70 mg/100 mL, respectively, and their tannin contents levels in Chungtaejeon and green tea extracts were 214.14 mg/100 mL and 259.60 mg/100 mL, respectively, showing a difference in content. The catechin contents of the Chetaejeon and green tea extracts were in the order of EGC($15.80{\sim}16.50\;mg/100mL$), EGCG($10.40{\sim}10.60\;mg/100 mL$), and ECG($9.55{\sim}9.88\;mg/100 mL$), however, with the exception of EC(7.86 mg/100 mL) in the green tea extracts, there were not significant differences between that in them Chetaejeon and green tea extracts. Quercetin was the main flavonoid ingredient component in those both the Chungtaejeon and green tea extracts was quercetin, at levels of 0.08 mg/100 mL and 0.06 mg/100 mL and its contents in Chungtaejeon and green tea extracts were 0.08 mg/100 mL and 0.06 mg/100 mL, respectively. The primary amino acid in both tea extracts was theanine main amino acid at levels of, theanine contents were most increased in 8.02 mg/100mL and 10.80 mg/100 mL, respectively, Chungtaejeon tea extracts by 8.02 mg/100 mL and green tea extracts by 10.80 mg/100 mL. And the arginine contents of the Chungtaejeon and green tea extracts in Chungtaejeon and green tea extracts were 1.78 mg/100 mL and 1.86 mg/100 mL, respectively. In terms of mineral composition, potassium content was highest contents in the Chungtaejeon and green tea extracts by 19.80 and 18.04 mg/100 mL, respectively. Finally, the Chungtaejeon tea extracts offered the greatest anti-oxidation and ACE inhibition activities were most increased in the Chungtaejeon tea extracts, and the green tea extracts showed the highest level of nitrite radical scavenging activity at 90% was extremely much increased in the green tea extracts by 90%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.503-509
• /
• 2016

To identify causes for drastic decrease in yield of tomato with repeated culturing number of the bag culture substrate of greenhouse tomatoes we investigated the physical and chemical properties of a coir used as the bag culture substrate to grow tomato at the Booyeo tomato experimental institute located in Booyeo, Chungnam Province for three years from 2012 to 2014. The results showed that total porosity ranged from 65.4 to 73.1% for the bulk densities of coir ranging from 0.12 to $0.14g\;cm^{-3}$. The volumetric water contents measured at 0.01 bar as air entry point were 25% (before), 33% ($1^{st}yr$), 45% ($2^{nd}yr$), and 37% ($3^{rd}yr$). Organic matter contents ranged from 82.0 to 96.2% (highest in $1^{st}yr$). pH and EC ranged from 4.47 to 6.47 (highest in $2^{nd}yr$), and from 22.2 to $53.5dS\;m^{-1}$ (highest in $1^{st}yr$) and cation exchange capacity ranged from 71.0 to $191.7cmol\;kg^{-1}$ (highest in $3^{rd}yr$). The surface structure observed with electrical microscope showed that the number of large pores decreased with increasing cultivating time while the proportion of smaller pores increased, indicating that the coir was consistently decomposed. Therefore, we could conclude that these changes of all physical and chemical properties of the coir may influence the holding capacities of water and nutrients, resulting in deterioration of quality of culture substrate of greenhouse tomatoes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.310-317
• /
• 2008

This study was carried out to investigate the factors of desalinization of the rainfall interception culture soils of Rubus sp. in Gochang-gun, Jeollabuk-do. Soil samples were collected from 85 different sites of the rainfall interception culture soils of Rubus sp. in Gochang-gun, Jeollabuk-do. The electrical conductivity in paste saturation of rainfall interception culture soils ranged from $1.0\sim28.4dS\;m^{-1}$ (average: $4.8dS\;m^{-1}$) and salt affected soil which EC was higher than $4dS\;m^{-1}$, covered nearly 55% of all field surveyed. Salts in rainfall interception culture soils were accumulated by increasing the cultivation period. Electrical conductivity in rainfall interception culture soils was positively correlated with water soluble anions such as chloride ion ($r=0.85^{**}$), nitrate ion ($r=0.94^{**}$), phosphate ion ($r=0.88^{**}$), and sulfate ion ($r=0.84^{**}$), respectively. As a result of desalinization experiments carried out by water management practices, the rinsing method was more effective than leaching method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.345-356
• /
• 2017

We investigated 52 livestock farming complexes in Gyeong-Gi and Incheon provinces based on low, medium, and high livestock density and groundwater quality. The objective of this study was to evaluate a relationship between nitrate N concentration in groundwater and animal factors, such as livestock density and animal species. 2,200 groundwater samples for 3 years from 2012 to 2014 at Gyeong-Gi and Incheon provinces were collected and analyzed for pH, EC, DO, ORP, temperature, major anions and cations, such as $NO_3-N$, ${HCO_3}^-$, ${PO_4}^-$, ${SO_4}^{2-}$, $Cl^-$, $NH_4-N$, $K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$, T-N, and TOC. Average concentration of total N for generated load density was $23,973g\;day^{-1}\;km^{-2}$ for cattle, $51,551g\;day^{-1}\;km^{-2}$ for pig, and $52,100g\;day^{-1}\;km^{-2}$ for poultry. For animal feeding species, average ratio for generated load over discharge load was 16.1% for cattle, 7.8% for pig, and 7.1% for poultry. Therefore, cattle feeding region is highly vulnerable for water pollution compared to pig and poultry feeding areas. The concentrations of chloride, nitrate, and total N in the groundwater samples were higher at high animal farming regions than other regions. The average concentration of nitrate, and chloride in groundwater samples was $5.0mg\;L^{-1}$, $16.6mg\;L^{-1}$ for low livestock density, $6.9mg\;L^{-1}$, $17.7mg\;L^{-1}$ for medium livestock density and $7.6mg\;L^{-1}$, $22.7mg\;L^{-1}$ for high livestock density and total nitrogen (T-N) was $7.7mg\;L^{-1}$ for low livestock density, $9.4mg\;L^{-1}$ for medium livestock density, $10.7mg\;L^{-1}$ for high livestock density. In conclusion, based on this research, for managing groundwater quality near livestock farming regions, $Ca-(Cl+NO_3)$ group from the Piper diagram is more efficient than using 19 factors for water quality standard.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.89-94
• /
• 2013

Layered $Li_{1+x}(Mn_{0.4}Ni_{0.4}Fe_{0.2})_{1-x}O_2$ (0 < x < 0.3) solid solutions were synthesized using solgel method with adipic acid as chelating agent. Structural and electrochemical properties of the prepared powders were examined by means of X-ray diffraction, Scanning electron microscopy and galvanostatic charge/discharge cycling. All powders had a phase-pure layered structure with $R\bar{3}m$ space group. The morphological studies confirmed that the size of the particles increased at higher x content. The charge-discharge profiles of the solid solution against lithium using 1 M $LiPF_6$ in EC/DMC as electrolyte revealed that the discharge capacity increases with increasing lithium content at the 3a sites. Among the cells, $Li_{1.2}(Mn_{0.32}Ni_{0.32}Fe_{0.16})O_2$ (x = 0.2)/$Li^+$ exhibits a good electrochemical property with maximum initial capacity of 160 $mAhg^{-1}$ between 2-4.5 V at 0.1 $mAcm^{-2}$ current density and the capacity retention after 25 cycles was 92%. Whereas, the cell fabricated with x = 0.3 sample showed continuous capacity fading due to the formation of spinel like structure during the subsequent cycling. The preparation of solid solutions based on $LiNiO_2-LiFeO_2-Li_2MnO_3$ has improved the properties of its end members.

• Tuberculosis and Respiratory Diseases
• /
• v.38 no.1
• /
• pp.8-15
• /
• 1991

It has been well known that the integrity of airway epithelium is important in development of bronchial hyperreactivity and bronchial asthma. But the mechanisms involved are still unclear. To evaluate that airway epithelium is able to modulate the contraction of guinea pig tracheal smooth muscle, we investigated the responsiveness of intact and epithelium-denuded tracheal strips to histamine and acetylcholine. And to evaluate whether cyclooxgenase products play a role in this modulatory mechanism, we also investigated the effect of indomethacin pretreatment on the tracheal responsiveness to histamine. Results were as follows: 1) In guinea pig tracheal smooth muscle the presence of airway epithelium significantly reduced the response to histamine. 2) In the presence of indomethacin dose-response curves and $EC_{50}$ values were similar between intact and epithelium-denuded tracheal strips, that is, indomethacin abolished the influence of epithelium on the contracion of tracheal smooth muscle. 3) The response of tracheal smooth muscle to acetylcholine was similar both in the presence and absence of epithelium. These results suggest that airway epithelium of guinea pig may generate an inhibitory signal to decrease the response of tracheal smooth muscle to histamine and cyclooxygenase products may contrbute to the modulation of airway epithelium on the contracion of tracheal smooth muscle.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.113-122
• /
• 2000

The reinforced composte resin as the esthetic operative material continuously has been studied because the porcelain fused metal prosthesis is widely used for its excellent esthetics, rigidity and marginal integrity, but it has low fracture resistance against the tensile strength and stress, attrition of the opposite teeth. The reinforced composite resin is well adapt with the dental alloy but it is low the shear bond strength with the dental alloy vs the porcelain fused metal prosthesis, and then has been studied continuously. The purpose of the study was to examine how metal was the higher shear bond strength among the dental alloy was used to the reinforced composite resin and to find the effect that the particle size of sandblasting influenced the shear bond strength. We built up the reinforced composite resin with 4 mm in diameter, 3 mm in height on circular alloy with 5 mm in diameter, 2 mm in height. Type II gold, type IV gold, and Ag-Pd alloy was used as alloys and $50{\mu}m$, $110{\mu}m$, $250{\mu}m$ of the particle size was sandblasted at each alloy in bonding between alloy and resin. We made 90 secimens of 10 per each group and we measured the shear bond strength using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The obtained results were as follows : 1. In comparison among each alloys, Ag-Pd alloy had the highest shear bond strength and the shear bond strength was decreased significantly in the sequence of the type II gold and type IV gold(P<0.001). 2. In comparison according to the size of sandblasting particle, (1) In Ag-Pd alloy, shear bond strength was decreased in the sequence of $110{\mu}m$, $250{\mu}m$, $50{\mu}m$ and there were significant difference in all the group. (P<0.05) (2) In type II gold, it was decreased in the sequence of $250{\mu}m$, $50{\mu}m$, $110{\mu}m$ and there were significant difference. (P<0.05) (3) In type IV gold, it was decreased in the sequence of $110{\mu}m$, $50{\mu}m$, $250{\mu}m$. There were significant difference between the group of $110{\mu}m$ and $50{\mu}m$, the group of $110{\mu}m$ and 250, but there were no significant difference in the group of $50{\mu}m$ and $250{\mu}m$. 3. The highest shear bond strength according to the size of sandblasting particle was $110{\mu}m$ in Ag-Pd alloy and type IV gold, $250{\mu}m$ in type II gold.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.355-363
• /
• 2012

A series of poly(hydroxyamide)s (PHAs) having trifluoromethyl group were prepared by direct polycondensation of aromatic diimide-dicarboxylic acids with 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane by thionyl chloride and triethyl amine in N-methyl-2-pyrrolidinone (NMP). The PHAs exhibited inherent viscosity in the range of 0.54-0.96 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs were readily soluble in a variety of organic solvents, whereas the polybenzoxazoles (PBOs) were quite insoluble except partially soluble in sulfuric acid. PHAs were converted to PBOs by thermal cycling reaction with heat of endotherm. The maximum weight loss temperature of the PHAs occurred in the range of $559-567^{\circ}C$. The PBOs showed relatively high char yields in the range of 47-59%. Pyrolysis Combustion Flow Calorimeter (PCFC) results of the PBOs showed 12-19 W/g heat release rate (HRR), and 2.7-3.6 kJ/g total heat release (total HR). The HRR of PBO 1 showed the lowest value of 12 W/g, which was 37% lower than that of PBO 3 (19 W/g).

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.336-340
• /
• 2012

Residual stress in the injection molded part is originated from thermal shrinkage and shear stress during injection molding process. There are many measurement methods of residual stress in the plastic part. Residual stress in opaque products can be measured by chemical cracking test. This method enables the solvent and specimen to react and to cause cracks. Cracks developed according to the level of residual stress. Thus the stresses in plastic part can be quantitatively measured by counting the number of cracks or measuring the size of cracks. Relationship between stress and number of cracks in a plastic specimen has been investigated in this study. Bergen jig was used to give a strain in the specimens those were molded using PC/PBT and PC/ABS. Solvent for the chemical cracking test was prepared using tetrahydrofuran and methyl alcol with the ratio of 1 to 3. Stresses in the specimen can be calculated by strains those were imposed by Bergen jig. Cracks were developed for stress higher than certain level. The number of cracks increased by second order function for stress.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.297-309
• /
• 2012

Different amounts of foaming agents were employed in natural rubber(NR)/butadiene rubber(BR) blends to understand the foaming behavior in presence of nano-reinforcing agent, zinc methacrylate (ZMA). The ZMA greatly improved most of the mechanical properties of the rubber foams, however it did not show considerable effect on the cell morphology, such as cell size, density and porosity. It was also observed that the foaming agent concentration affected all the mechanical parameters. When the content of foaming agent was increased, the number of foams was increased leading to a decrease in density of the compounds. But the size and distribution of foams remained unchanged with increased foaming agent. The effect of high styrene-butadiene rubber (HSBR) was also studied. The size of cells became smaller and the cell uniformity was improved with increasing HSBR. The foam rubber compounds showed much efficient energy absorbing capability at higher strains.