• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.175-179
• /
• 2000

A combustion project was completed regarding the development of a high-flow-rate purge burner in cooperation with three city gas companies(Pusan, Taegu, Samchulli). The project, started in May 1991, aimed at purging the line-packed-gas safely and quickly before getting into gas pipe working or relocation. According to the results, the purging noise is less than 80dB due to silencer screen. multi-nozzle and outlet inserted tube employed. In addition, the developed burner shows an increased work efficiency of 40-50% more as compared to the performance of conventional purge equipments. The project result is regarded as the first high-flow-rate purge burner developed within Korea. contributing to shortening purge hours, safe field work and easiness of purge site selection.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.370-373
• /
• 2002

A new phase shift full bridge converter(PSFB) with serially connected two transformers is proposed. It is well suited for applications in the communication equipment of a few hundred watts. The main features of the proposed converter are a wide input voltage range, an easiness to meet the requirement for zero voltage switching (ZVS) condition at a light load, and a small output voltage ripple. Furthermore, it features high power density since serially connected two transformers can replace both a main transformer and an output inductor. A mode analysis and experimental results are presented to verify the validity of the proposed converter.

• 전기의세계
• /
• 제26권1호
• /
• pp.71-76
• /
• 1977

It has been expected that the 4th generation computers will be characterized for their problem adaptability. There are few techniques of implementing such a characteristic. One of the techniques that one have considered in this paper the user microprogrammable computer architecture. There are two different computer architectures that support user microprogramming. One uses the writeable control storage and another uses the main memory. The concept of utilizing writeable control storage for microprogramming was developed in 1950's and since then the most of the user microprogrammable computers produced belong to such category. The concept of utilizing the main memory for user microprogramming was first introduced by Thomas in 1973. This architecture has a strong advantage in the aspect of the system cost. In this paper, we have developed a user microprogrammable computer. The computer utilizes the main memory for user microprograms. It employs a 32 bit micro-instruction word in the form of the little encoded. The performance of the developed machine will be evaluated in the hard ware cost, programming easiness and the running time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.540-540
• /
• 2000

This paper explores design and control methods of a surgical robot for total hip replacement surgery which can be easily maneuvered by a surgeon Like an advanced surgical tool. The 3-DOF in-parallel surgical robot is fixed directly onto patient's femur by the bone clamp during surgery. With the master/slave combined surgical robot, the surgeon can directly control the motion of the surgical robot with surgeon's experience and judgment during operation. For the easiness of operation, the master/slave combined robot is controlled using admittance control paradigm. And for the precise operation, the robot motion is restricted at the surgical boundary using virtual hard wall display.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.707-712
• /
• 1994

An Enhanced Shopfloor Oriented Programming(AESOP) system is developed as a programming utillity of the CNC turning machine. The developed system is specially designed to give a beginner the convenience for CNC part programming with graphical interaction between a machine operator and the AESOP system. The combination of process-oriented cycles and various contour programming as well as an immediate tool path verification support the easiness and swiftness of a part program generation in the shopfloor. Since the AESOP system has been designed to operate on the basis of MS-Windows in the PC-embedded CNC system, it is also useful for the training of the part programming by utilizing provailing personal computers in the educational department.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2013

To have the competitiveness in the future worldwide small aircraft market, we should be able to develop the aircraft which is highly safe, easy to fly, and having excellent flight characteristics. FBW(Fly-By Wire) system is essential for the enhancement of flight safety and control easiness. FBW system that has been applied only to the modern fighter and transport aircraft is recently applied to smaller aircraft such as regional aircraft, business aircraft and even small aircraft. The purpose of this research includes the development of flight control computer, the definition of FBW system component, the design concept of each component for redundant management, OFP(Operational Flight Program) development, FBW system integration and HILS(Hardware In-the Loop Simulation) verification environment to test this FBW system.

• 소성∙가공
• /
• 제8권2호
• /
• pp.188-199
• /
• 1999

Semi-Solid Forming Process(Thixoforming, Rheocasting) is a novel forming process which has some advantages compared with conventional die casting, squeeze casting and hot/cold forging. In this study. Thixoforming process was selected as analysis processing in terms of billet handling and easiness of automation process. The Thixoforming process consists of reheating process of billet, billet handling, filling inot the die cavity and solidification of SSM part. In filling process, two rheology models which were Newtonian and Non-Nettonian model (Ostwald-deWaele)were verified with experimental results. The Ostwald-deWaele model shows the good agreement to the real flow and filling phenomena in die cavity. To give a boost the economical efficiency of Thixoforming process and to ensure the good forming result, reheating device coupled die set was proposed and the initial billet temperature for system that was found from experimental resluts. This study presents an overview of application of numerical analysis for simulation of semi-solid metal forming process to reduce the lead time for development of manufacturing part in industrial field.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.792-800
• /
• 1996

The shape retention finishing provides a fabric for easiness of no-ironing after laundering. In spite of the obvious importance of the new finishing treatment, few systematic studies have been performed on the handle of the fabrics finished by the durable press process. The purpose of this research is to investigate the relationships among the mechanical properties, durable press conditions, primary hand values and the total hand value of the fabrics finished by shape retention process. In this experiment, durable press grade of unfinished fabrics decreased below 2.5, but those of finished fabrics maintained above 4, but the mechanical properties of finished fabrics did not change significantly after laundering. In finished fabrics, D.P. value were correlated with mechanical properties, but had little effects with H.V. and T.H.V. Since the evaluation of the effect of durable press process was done with the naked eyes and standard sample, we could not know exactly change o( mechanical properties, but trace the change of mechanical properties which gave influences on the durable press effects by using KES-FB System.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.97-108
• /
• 1994

The DC Servo Motor has been used as an actuator in automatic control fields because of the good response and the control easiness nevertheless it has some disadvantage such as spark at the brush. Recently, along with the fast development of semiconductor industries, the digital control scheme is increasing in comparison with analog control because of the strength against noise and the accuracy. In this paper, authors proposed a combined control algorithm, which is mixed Modified Minimum Time Position Control(MMTPC) and PI control algorithm. for minimum time position control of DC Servo Motor by the one-chip microcontroller. The proposed control algorithm showed the fast response and offset-free. The validity of the proposed method comparing with the VSS control is proved by the response experiments.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.544-552
• /
• 2004

This study was conducted to suggest the efficient gathering and recycling method of disused agricultural machinery in rural environment. In order to suggest this methods, the keeping means, maintenance, disused period and kinds of agricultural machinery were investigated. The results obtained in this study were as follows : The disused agricultural machinery have been leaved on the vacant lot of a farmhouse and an around field for $2\~5\;years$. The leaving reason of the disused agricultural machinery was low interesting and gathering price for the disused agricultural machinery. The present situation for recycling method was using as a scrap iron, however to increase recycling percent the disassembling process has to divide as using and parts concretely. And the design of agricultural machinery was considered the easiness of a disassemble and assemble the agricultural machinery. To manage and supply efficiently for the second-hand parts of agricultural machinery need to the establishment of circulation information center and internet site for the parts.