• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.49-59
• /
• 2012

This study is aimed to increase the fire-fighting manpower utilization and the increasing of its services in aging society. Due to continuous improvement of living standards and development of medical technology, the elderly population rate is being increased and it brings rapid progresses of aging society. Therefore, as a fire-fighting organization which is responsible for safety from various disasters, they should grasp comprehensively and systematically exact status of weak person from disaster in perspective of it with conjunction of all concerned department and at the same time proceed to speedy move as well as determine the appropriate emergency measures. In order to do this, safe life education for elderly people and the comprehensive measures of home security should be taken by transforming the policy from particular object-oriented policy to demand-driven policy. And through the expansion of one one nine services such as using grandeur of powerful IT nation out of old-fashioned promotion way, they should provide fire-fighting service for convenient and comfortable life of elderly people after retirement. A consideration of the elderly people is the best way to penetrate a advancement fire-fighting in aging society.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.187-193
• /
• 2020

Ultraviolet (UV) sensors are widely applied in industrial and military fields such as environmental monitoring, medicine and astronomy. Zinc oxide (ZnO) is considered as one of the promising materials for UV sensors because of its ease of fabrication, wide bandgap (3.37 eV) and high chemical stability. In this study, we used the hydrothermal growth of ZnO to form two types of ZnO nanostructures (Nanoflower and nanorod) and applied them to a UV sensor. To improve the performance of the UV sensor, the hydrothermal growth was used in a two-step process for fabricating ZnO hierarchical nanostructures. The fabricated ZnO hierarchical nanostructure improved the performance of the UV sensor by increasing the ratio of volume to surface area and the number of nanojunctions compared to one-step hydrothermal grown ZnO nanostructure. The UV sensor based on the ZnO hierarchical nanostructure had a maximum photocurrent of 44 ㎂, which is approximately 3 times higher than that of a single nanostructure. The UV sensor fabrication method presented in this study is simple and based on the hydrothermal solution process, which is advantageous for large-area production and mass production; this provides scope for extensive research in the field of UV sensors.

• Asia-Pacific Journal of Business
• /
• v.9 no.2
• /
• pp.105-121
• /
• 2018

In 1995, the WTO started to ease the trade barriers. Globalization has accelerated. The opening of the agricultural products market is rapidly gaining momentum with the conclusion of an FTA. The acceleration of this FTA is expected to be a threat to Korea's agriculture, and a new strategy is needed. At the beginning of the nuclear accident, mainly radioactive materials are found in the surface layer of the soil. Over time, the concentration of the plant gradually increases. After 5 years, it becomes noticeable. In March 2016, it will be five years after the nuclear accident. Radioactive contamination is very likely to occur in agricultural products produced in the Fukushima area at this time. In this period, agricultural products produced in the Fukushima region are expected to generate supply disruptions in Japan, and imports to replace them will increase. Therefore, it is necessary to establish a mid- and long-term strategy for exporting to Japan by analyzing the competitiveness of Korean agricultural products. In this study, standardization index was derived by using agricultural price ratio, TSI, export CAC. Based on this, we analyzed the competitiveness of each item in the Japanese market. The analysis shows that garlic is the most competitive product in the Japanese market. Also, strawberry, tomato, and cucumber were found to be competitive. On the other hand, Kiwi, pineapple, soybean, onion, potato, etc. As a result of the analysis, the following strategies were proposed for the export of agricultural products with high competitiveness. First, it is necessary to develop technology to suppress deterioration of export transportation quality. Second, continuous supply of local consumption pattern information is required. Third, it is necessary to expand exports by processing fresh food. Fourth, it suggested the establishment of export base and strengthening of support system.

• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.139-146
• /
• 2019

A simple and reliable analytical method based on high-performance liquid chromatography-ultraviolet detection was established for the analysis of the flowers of Chrysanthemum morifolium (CM). Luteolin-7-O-glucoside (LU7G) was chosen as a target analyte considering its content, availability, and ease of analysis. Chromatographic separation of LU7G was achieved using a Phenomenex Gemini $C_{18}$ column ($250{\times}4.6mm$, $5{\mu}m$) run with a mobile phase consisting of 0.5 % acetic acid in water and 0.5 % acetic acid in acetonitrile at a flow rate of $1.0mL\;min^{-1}$. The detection wavelength and column temperature were set at 350 nm and $40^{\circ}C$, respectively. Method validation was performed according to the AOAC guidelines and the method was specific, linear ($R^2=0.9991$ for $50-300{\mu}g\;mL^{-1}$), precise (${\leq}3.91%$RSD), and accurate (100.1-105.7 %). The limits of detection and quantification were 3.62 and $10.96{\mu}g\;mL^{-1}$, respectively. The established method was successfully applied to determine the contents of LU7G in various batches of bulk CM extracts and labscale CM extract. The developed method is a readily applicable method for the quality assessment of CM and its related products.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.715-734
• /
• 2023

Purpose: Authors suggest a new alternative of preparedness capabilities for health care institutes to react to the new types of communicable diseases and the pandemic situations through the quality improvement and advancement of Negative Pressure Isolation Stretcher (NPIS). Methods: We employed FOCUS-PDCA, a representative quality improvement model. First, we identified and materialized necessary components of existing NPIS to be improved. Second, we fabricated an advanced NPIS prototype. Third, we carried out a performance test by the accreditation institute and an empirical evaluation at the communicable diseases trauma center, to locate the improvement pain points of the prototype. Finally, we draw a conclusion on quality improvement points to be considered during the production stage. Results: The suggested, NPIS outperforms the existing one in terms of communicable disease controls, patient treatments and the safety during the patient transfer, and the ease of use. Additionally, the suggested NPIS turns out to be a proper alternative to satisfy the requirements of long range transfer of patients with communicable disease. Conclusion: Authors developed a quality improved, NPIS prototype. There are several points that still remain to be improved. Additionally, we expect that the concurrent use of the suggested NPIS with the existing one will fortify the preparedness capabilities on reacting to the communicable diseases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.157-168
• /
• 2006

Recently, interest in using Al alloys in ship construction instead of fiber-reinforced plastic (FRP) has increased because of the advantages of A) alloy ships over FRP ships, including high speed, increased load capacity. and ease of recycling. This paper investigated the mechanical and electrochemical properties of Al alloys in a slow strain rate test under various potential conditions. These results will provide reference data for ship design by determining the optimum protection potential regarding hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys do not corrode on formation of a film that has resistance to corrosion in neutral solutions. In seawater, however, $Cl^-$ ions lead to the formation and destruction of a Passive film. In a potentiostatic experiment. the current density after 1200 sec in the Potential range of $-0.68\~-1.5\;V$ was low. This low current density indicates the protection potential range. Elongation at an applied potential of 0 V was high in this SSRT. However, corrosion protection under these conditions is impossible because the mechanical properties are worse owing to decreased strength resulting from the active dissolution reaction in parallel parts of the specimen. A film composed of $CaCO_3\;and\;Mg(OH)_2$ confers corrosion resistance. However, at potentials below -1.6 V forms non-uniform electrodeposition coating, since there is too little time to form a coating. Therefore, we concluded that the mechanical properties are poor because the effect of hydrogen gas generation exceeds that of electrodeposition. Comparison of the maximum tensile strength, elongation, and time to fracture indicated that the optimum protection potential range was from -1.45 to -0.9 V (SSCE).

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.339-345
• /
• 2014

This study was performed to develop a rapid immuno-assay kit, by using a specific antigen to detect Hanwoo brand meat. We selected a synthetic antigen specific to our target antibody, named BIO-TAG (Tyr-D-Ala-Phe), by utilizing a computer-based analysis and literature review. BIO-TAG tagged with adjuvant was subcutaneously injected in sheep and Hanwoo. The serum and meat juice of the immunized or non-immunized animal were then analyzed, to measure the titer of antibody by ELISA and Western blot. The amount of antibodies against the BIO-TAG increased (p<0.05) in serum by vaccination. Furthermore, meat juice from the immunized Hanwoo showed greater (p<0.05) antibody titer, compared with those from non-immunized groups. To optimze the dilution factor, we performed dot-ELISA, with various combination levels of BIO-TAG. Results from dot-ELISA showed that 2 mg/mL BIO-TAG was sufficient to distinguish the immunized meat from non-immunized groups. These results support our hypothesis that simple immunization of Hanwoo generates a sufficient amount of antibodies to be detectable in the meat juice by means of the immune-assay. Therefore, specific Hanwoo brand meat can be more precisely identified by our rapid diagnostic kit. This technology can deter possible fraud of counterfeit meat brands in the Korean domestic market with ease and rapidity; and offers a new tool that guarantees consumers high quality Hanwoo brand beef.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.221-229
• /
• 2023

This study aims to develop knee protectors that provide high safety and fitness, while incorporating a motion-adaptable 3D-printed pad. These protectors were evaluated by individuals who experience knee discomfort or pain. The results are as follows. First, the 3Dprinted pad design of a hexagonal mesh structure, which is modeled for excellent appearance and knee movement. Each unit of the mesh has a outer layer of 2mm thick, a spacer layer of 1 mm in diameter, and is connected by a 1.5 mm bridge. The bridge was extended up to 1.2 cm. Second, the knee brace was designed in three types - cylinder, strap, and combination by Universal design. Impact protection measurements of the three knee protectors demonstrated roughly 80% reduction in impact. Third, based on usability evaluation, cylinder type protectors have the highest ratings in most areas, primarily because of their ease of use. The strap type protector received positive reviews in terms of appearance and care, and the combination type provided stable knee protection. This study demonstrated the potential industrial application of 3D printing technology by designing and evaluating protective products for the human body. The results of this study are expected to aid knee protector manufacturers in developing practical products and promoting the development of protective equipment for other body parts or purposes.

• The Journal of Information Systems
• /
• v.28 no.3
• /
• pp.1-23
• /
• 2019

Purpose This study examines the role of corporate image and privacy concerns in intention to use of online travel services using data from Vietnam. Design/methodology/approach The data collection was implemented to a student sample at the Foreign Trade University in Hanoi, which has a high concentration of young people who are interested in online travel in Vietnam. The paper based questionnaire was directly delivered to the respondents. After sorting to eliminate unfit samples, the number of responses was 541, which exceeds 500, the minimum number typically required. To test the hypotheses, we applied structural equation modeling (SEM) and Confirmatory Factor Analysis (CFA) was used to evaluate the reliability and validity of constructs in the model. We also used direct, indirect and total effect coefficient to evaluate the total impact of factors on the intention to use online services. Findings This study found that corporate image is positively associated to intention to use online services. It found a link between corporate image and privacy concerns, which suggests another way for firms to address their customers' privacy concerns; corporate image, which has received great attention in traditional offline sales channels, but not in online services, should receive higher attention in IS research. Online travel businesses, besides increasing ease of use, perceived usefulness and trust in their services, should focus on build a reliable corporate image, which can not only promote the service use but also help to eliminate users' the privacy concerns.

• Journal of Information Technology Services
• /
• v.21 no.1
• /
• pp.163-179
• /
• 2022

Two dominant phenomena in modern world; population ageing and digitalization, have led public sector organizations to heavily rely on B2C(Business-to-Consumer) mobile applications. Yet, fatal concerns and complaints have often been raised by the mobile application users, notably from social welfare sector. With the continual expansion of digital landscape as well as the growth of life expectancy, usage of mobile applications has become prevalent across the stakeholders involved in social welfare sector. 'Smart Long-Term Care (SLTC)', inter alia, is a primary example of such mobile applications, designed to support Long-Term Residential Care (LTRC) service. The main goal of SLTC is to serve more convenient and practical LTRC service for both caregivers and care receivers. To examine user satisfaction of SLTC mobile application, this study investigates existing challenges and means to improve user satisfaction. Hence, we conducted this study using two methods: in-depth interview and topic modeling. Interestingly, two research outcomes commonly indicated that 5 factors (stability, accessibility, usefulness, responsiveness, and ease of use) were found significant in affecting user satisfaction of SLTC. Our findings suggest that the aforementioned factors can be seen as potential causes of the genuinely low user satisfaction. Eventually, this work will be a stepping-stone to elevate the overall quality level of LTRC service along with the user satisfaction degree of SLTC mobile application.