• 제목/요약/키워드: Earth resistivity

검색결과 471건 처리시간 0.031초

제방의 취약구간 파악을 위한 전기비저항과 탄성파속도의 교차출력 해석 (Crossplot Interpretation of Electrical Resistivity and Seismic Velocity Values for Mapping Weak Zones in Levees)

  • 조경서;김정인;김종우;김지수
    • 지질공학
    • /
    • 제31권4호
    • /
    • pp.507-522
    • /
    • 2021
  • 각 탐사의 반응 값은 지하 매질의 특정 물성에 따라 달라지기 때문에 한가지의 지구물리학적 방법만으로는 탐사목적을 달성하지 못하는 경우가 종종 있다. 특히 지질재해 위험에 취약한 지역을 조사하는 경우, 인명 및 재산피해를 최대한 줄이기 위해 한 가지 이상의 탐사방법을 사용하는 것이 효과적이다. 제방의 안전성 평가를 위한 이 연구에서는 각 탐사결과들을 개별적으로 해석하는 대신 탄성파속도(굴절법에 의한 P파속도와 MASW의 S파속도)와 전기비저항 값들을 통계적으로 분석하여 결정된 임계값들을 기반으로 취약구간과 안전구간 등으로 구분하는 사분면 상관기법을 수행하였다. 임계값은 수평 4층 구조와 경사진 파쇄대에 대한 모델자료를 가지고 수행한 사분면 상관기법을 테스트하는 과정에서 두 개의 속성자료 모두 평균에서 표준편차를 빼준 값으로 결정되었다. 전기비저항-P파속도의 교차출력에 비해 전기비저항과 S파속도를 이용한 교차출력 해석이 제방 시스템의 토양유형, 지반강성 및 암석학적 특성 정보를 보다 충실히 제공하였다. 낮은 S파속도와 높은 전기비저항으로 2사분면에 투영된 느슨한 모래 구역이 취약구간으로 평가되는데 이와 같은 해석은 시추공 표준관입시험에서 보인 중심코어의 N 값 분포로 뒷받침되었다.

Grain Size Dependence of Ionic Conductivity of Polycrystalline Doped Ceria

  • Hong, Seong-Jae
    • The Korean Journal of Ceramics
    • /
    • 제4권2호
    • /
    • pp.122-127
    • /
    • 1998
  • Conductivities of polycrystalline ceria doped with several rare earth oxides were measured by AC admittance and DC four probe method. The conductions were separated into grain and grain boundary contributions using the complex admittance technique as well as grain size dependence of conductivity. The grain size dependence of polycrystalline conductivity, which can be adequately described by the so-called brick layer model, appears to give a more reliable measure of the grain conductivity compared to the complex admittance method. Polycrystalline resistivity(1/conductivity) increases linearly with the reciprocal of grain size. The intercept of resistivity vs. inverse grain size plot gives a measure of the grain resistivity and the slope gives a measure of the grain boundary resistivity. It was also noted that errors involved in the analysis of experimental data may be different between the complex admittance method and the impedance method. A greater resolution of the spectra was found in the complex admittance method, insofar as the present work is concerned, suggesting that the commonly used equivalent circuit may require re-evaluation.

  • PDF

전기설비의 저항성 누설전류 검출 및 특성 해석에 관한 연구 (Study on the Resistivity Leakage Current Detection and Properties Analysis of Electrical Installat ion)

  • 최충석;한송엽
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
    • /
    • pp.301-304
    • /
    • 2008
  • In this paper, we study from of flowing leakage current in electrical installation. Leakage current is expressed by a resistivity leakage current($I_{gr}$), a capacitive leakage current($I_{gc}$), an inductivity leakage current($I_{gl}$). General Zero Phase Current Transformer (ZCT) detect a leakage current($I_{g}$) that are conjoined resistivity leakage current and capacitive leakage current. In case $I_{gr}$ is big than $I_{gc}$, there is no singular problem in leakage current detection of system. But, in case $I_{gc}$ is big than $I_{gr}$, earth leakage breaker can not prevent accident effectively. Can lower electric leakage perception current to 5 mA if apply resistivity leakage current detecting circuit. We can achieve prevention of electricity disaster spontaneously.

  • PDF

접지전극을 고려한 모형블록의 저항률 분석 (Resistivity Analysis of Model Block for Grounding Electrodes)

  • 고희석;김성삼;최종규
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 춘계학술대회 논문집
    • /
    • pp.437-439
    • /
    • 2007
  • This paper was analyzed the resistivity change characteristic of mortar model block and concrete that was made earth electrode that's used concrete or basic concrete of building for 1 year. The early resistivity measurement value of concrete model block is higher than mortar model block. But after 1 year the resistivity measurement value of mortar model block is significantly higher than concrete model block. Because depends on time elapsed complete dryness factor of mortar model block that has not gravel is higher than concrete model block. And absorptance and function of mortar mode block was by far outstanding than concrete model block in the data for verification of the amount of contained water and the amount of dryness of mortar model block and concrete model block.

  • PDF

전기비저항과 주시 토모그래피 탐사자료의 복합역산 (Joint Inversion of DC Resistivity and Travel Time Tomography Data)

  • 김정호;이명종;박권규;조창수
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.58-63
    • /
    • 2007
  • We developed a new algorithm for jointly inverting dc resistivity and seismic travel time tomography data based on the multiple constraints: (1) structural similarity based on cross-gradient, (2) correlation between two different material properties, and (3) a priori information on the material property distribution. Through the numerical experiments of surface dc resistivity and seismic refraction surveys, the performance of the proposed algorithm was demonstrated and the effects of different regularizations were analyzed.

  • PDF

해수침투 지역의 염분농도 분포 파악 및 전기비저항의 상관성분석 사례 (Rapid estimation of salinity in seawater intrusion zones and correlation analysis between resistivity and salinity)

  • 정래철;김정호;김기석;김종훈;안희윤
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.307-312
    • /
    • 2007
  • Seawater intrusion in estuarine regions is an important issue in protecting groundwater against salinity increase as well as in protecting construction materials against corrosion. For example, drain water ejected during accelerated consolidation for the improvement of soft ground can cause damages to farm land because the drain water from seawater intrusion zones contains salinity. In this study, we have employed correlation analysis between resistivity value and salinity of in situ pore water. The correlation analysis indicates that resistivity and salinity are in exponential relationship with good correlation. Therefore we suggest that rapid estimation of spatial distribution of NaCl is possible using resistivity data.

  • PDF

다양한 측정방법을 적용한 대지의 전기적 구조해석 (Electrical Structure Analysis of Ground using Various Methods for Resistivity Measurement)

  • 조성철;이태형;엄주홍;이복희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1492-1493
    • /
    • 2006
  • Wenner 4-probe arrangement is used most widely by the method to measure soil resistivity and the measured data with the Wenner method are apparent resistivities of the soil. Therefore, the soil structure can be analyzed easily from the measured apparent resistivity, but the real soil resistivity is difficult to know correctly at a particular depth or at a specific location on earth surface. This paper introduces a method that can be used to decide the suitable burial depth and the electrode scale of a grounding rod effectively using soil structure analysis equipment based on the dipole-dipole method.

  • PDF

관로 및 직매 포설에 대한 토양열저항의 검토 (STUDYING SOIL THERMAL RESISTIVITY ABOUT CABLE LAYING OF PIPE DUCTING, DIRECT BURYING)

  • 김영;권병일;권순철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 A
    • /
    • pp.174-176
    • /
    • 1993
  • Laying up homogeneous power cable in the earth. we sure that one of the most effectest fact is the rising of thermal resistivity. Today, system designing of in and outdoor project, calculating current carrying capacity totally depend on standard of JCS-168D and IEC-287 to applicate. Specially, the formula of calculating soil thermal resistivity is what is based on KENELLY,s is usually used. In this report, Let's study the formula of soil thermal resistivity which was born in the idea of KENELLY.

  • PDF

대지 저항률이 접지 특성에 미치는 영향 (Effects of Soil Resistivity on the Grounding Characteristics)

  • 정연하;장태준;곽희로;노영수;최충석
    • 조명전기설비학회논문지
    • /
    • 제19권5호
    • /
    • pp.74-79
    • /
    • 2005
  • 본 논문에서는 전국4개 도시에서 측정한 대지 저항률을 바탕으로 지층구조를 분석하고 접지시스템의 특성을 조사하였다. 그 결과 대지 저항률은 접지 저항 뿐만 아니라 안전과 직접 관련되는 지표면 전위, 접촉전압, 보폭전압에 영향을 미치는 것으로 밝혀졌다.

코어비저항 측정에 미치는 영향요소에 대한 실험적 고찰(Ⅱ) - 시계열자료의 특성과 대표비저항 값의 결정 (Experimental Verification on Factors Affecting Core Resistivity Measurements (II)-Characteristics of Time Series Data and Determination Method of Resistivity)

  • 김영화;최예권
    • 지구물리
    • /
    • 제2권4호
    • /
    • pp.269-276
    • /
    • 1999
  • 암석의 코어비저항 값을 올바르게 결정하기 위한 노력의 일환으로 비저항 측정에 있어서 샘플홀더의 영향을 분석하고 시계열자료로부터 암석의 비저항을 대표할 수 있는 비저항 값을 효과적으로 구하는 방안에 관하여 연구하였다. 샘플홀더에 대한 연구로는 기존의 GS식과 2전극식 방법과 함께 코어시료 표면을 전도성 접착제로 처리한 변형 GS식 및 변형 2전극식을 고안하여 각 특성을 비교하였으며 그 중에서 변형 2전극식이 측정자료의 안정성과 측정의 편이성 측면에서 장점이 있는 것으로 확인되었다. 샘플홀더 및 사용 소스 주파수의 차이에 따라 달리 나타나는 시계열자료의 분포특성에 관한 분석 결과는 최대곡률점을 이용하여 암석의 대표비저항을 결정하는 방법이 효과적임을 보이고 있다.

  • PDF