• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1353-1359
• /
• 2004

There are many massive components added on the railway overhead-line. These components cause larger fluctuations of contact forces, which are due to wave reflections and Doppler effects when a high-speed train passes those. In this paper, mathematical formula are derived for the relation between the added mass and contact force fluctuations. Using the derived formula, we calculate a added mass on the overhead-line which cause amplification factor to become 2.5. German design practice requires that amplification factor due to the wave reflection should be less than 2.5 to obtain good current collection performance. To show the validity of the formula, simulation results are compared with the calculation results. Simulation results showed that contact force fluctuations grow rapidly when an added mass is larger than the calculation result. Therefore, the simple form of formula can be used for estimating maximum added mass not to cause large fluctuations of contact forces in early design phase.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.147-157
• /
• 2018

There are increasing demands to provide early warning against intruding drones and cope with potential threats. Commercial anti-drone systems are mostly based on simple target detection by radar reflections. In real scenario, however, it becomes essential to obtain drone radar signatures so that hostile targets are recognized in advance. We present experimental test results that micro-Doppler radar signature delivers partial information on multi-rotor platforms and exhibits limited performance in drone recognition and classification. Afterward, we attempt to generate high resolution profile of flying drone targets. To this purpose, wide bands radar signals are employed to carry out inverse synthetic aperture radar(ISAR) imaging against moving drones. Following theoretical analysis, experimental field tests are carried out to acquire real target signals. Our preliminary tests demonstrate that high resolution ISAR imaging provides effective measures to detect and classify multiple drone targets in air.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.

• Journal of The Korean Association For Science Education
• /
• v.41 no.6
• /
• pp.519-531
• /
• 2021

This study investigates the science teacher identity of pre-service science teachers (PSTs) in the context of a teaching practice course. Twenty-two PSTs who took the 'Biological Science Lab. for Inquiry Learning' course at the College of Education participated in this study. Artifacts created during the course were collected, and the teaching practices and reflections were recorded and transcribed. In addition, semi-structured interviews were conducted with nine PSTs, recorded, and transcribed. We found the science teacher identity was not well revealed at the beginning of the course. Authoritative discourse appeared in the early oral reflections of PSTs, indicating that the PSTs perceived oral reflection activities as 'evaluation activities for teaching practice'. This perception shows that pre-service teachers participate in teaching practice courses as students attending a university, performing tasks and receiving evaluations from instructors. After the middle of the course, discourses showing the science teacher identity of the PSTs were observed. In the oral reflection after the middle part, dialogic discourses often arose, showing that the PSTs perceive the oral reflection activities as a 'learning activity for professional development'. In addition, in the second half, discourse appeared to connect and interpret one's experience with the teacher's activity, indicating that the PSTs perceive themselves as teachers at this stage. In addition, the perception of experimental classes was expanded through the course. During the course, the practice of equalizing the authority of the participants, providing a role model for reflection, and experiencing various positions from multiple viewpoints in the class had a positive effect on the formation and continuation of the teacher identity. This study provides implications on the teacher education process for teacher identity formation in PSTs.

• Child Health Nursing Research
• /
• v.12 no.4
• /
• pp.486-494
• /
• 2006

Purpose: This study was done to analyze children's play during hospitalization. Method: Data were collected from 36 play situations of hospitalized children, ages 2 to 6, hospitalized at 4 general hospitals, one in each city, Seoul, Suwon, Daejeon and Daegu. All observations were made in pediatric units during free-play periods. Each child was observed for 5 minutes at each observation and observed three times at each play session. Results: Of the children, 83.3% played on the bed. Play partners were mainly mothers. While 75.0% of children actively took part in play activity and 70.0% played with joy, 63.9% of play partners were more passive in the play. The most frequent play material was a small toy. The level of play was early stage of social and cognitive play, and dramatic play was observed in a few children over the age of 3 years. The play activities were conversional play, reflections of therapeutic procedures, imagination, and exploratory play. In the conversional play, children converted hospital equipments into play materials. Conclusion: It is recommended that health care team members should pay attention and actively participate in play of hospitalized children in order to help them have some control over the stress of the situation.

• KCI Concrete Journal
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2001

The spectral analysis of surface waves (SASW) method, which is an in-situ seismic technique, has mainly been developed and used for many years to determine the stiffness profile of layered media (such as asphalt concrete and layered soils) in an infinite half-space. This paper presents a modified experimental technique for nondestructive evaluation of in-place cement mortar compressive strength in single-layer concrete slabs of rather a finite thickness through a correlation to surface wave velocity. This correlation can be used in the quality control of early age cement mortar structures and in evaluating the integrity of structural members where the infinite half space condition is not met. In the proposed SASW field test, the surface of the structural members is subjected to an impact, using a 12 mm steel ball, to generate surface wave energy at various frequencies. Two accelerometer receivers detect the energy transmitted through the medium. By digitizing the analog receiver outputs, and recording the signals for spectral analysis, surface wave velocities can be identified. Modifications to the SASW method includes the reduction of boundary reflections as adopted on the surface waves before the point where the reflected compression waves reach the receivers. In this study, the correlation between the surface wave velocity and the compressive strength of cement mortar is developed using one 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slab of 2,000 psi (140 kgf/$\textrm{cm}^2$) and two 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slabs of 3,000 psi (210 kgf/$\textrm{cm}^2$).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

In this paper, a sound externalization method is proposed for out-of-the-head localization in a headphone listening environment. In order to reduce timbre distortion by the conventional methods using a measured a head-related transfer function (HRTF) or early reflections, the proposed method integrates a model-based HRTF with reverberation. In addition, for improving frontal externalization performance, techniques such as decorrelation and spectral notch filtering are included. To evaluate the performance of the proposed externalization method, subjective listening tests are conducted by using different types of sound sources such as white noise, sound effects, speech, and music. It is shown from the test results that the proposed externalization method can localize sound sources farther away from out of the head than the conventional method.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.266-274
• /
• 2019

As can be seen in the statistics on domestic performance facilities, small or large scale of acoustic renovations seem to be unavoidable in many of those facilities due to its senility. However it is hard to find case studies which can be referred to for its acoustic renovation process. This study tried to provide a case study example of acoustic renovation for a high school auditorium which has many restrictions as a cultural heritage building. Requirements from the client and acoustic problems found through a field measurement of existing space motivated acoustic design solutions and alternatives which can improve the acoustics of the space. The whole process from the initial stage of diagnosing acoustic problems to the final stage of a post acoustic evaluation after the completion of construction was described. The result from the post acoustic evaluation suggested that reverberation characteristics of the space as well as definition and clarity have been greatly improved by applying acoustic design solutions and alternatives. However, loudness of sounds in the space didn't reach the aimed level, which is due to the limited capability of slat ceiling structure for providing strong early reflections.

• Journal of English Language & Literature
• /
• v.56 no.2
• /
• pp.301-328
• /
• 2010

Many recent British novels engage with the construction and deconstruction of history and identity; and in dealing with these historical, or historicised novels it seems to be an untouchable ground that truth is beyond grasp. Even when approached, its authenticity should be examined under the post-modern "incredulity toward metanarrative" discourses. Julian Barnes's 1998 novel England, England may be one of these. Yet, unlike others it achieves a complicated and controversial status as a new kind of historiographic metafiction by providing selfconscious reflections on the invention of innocence and the questionable notion of historical authenticity against the background of current postmodern historical, cultural, and literary explorations. The book, set in a near-future, namely post-post-modern England, starts with a story of a young girl, Martha Cochrane, whose first memory goes back to her early infantile years. Yet, the narrator comments that it is a lie, "her first artfully, innocently arranged lie," since memory, or history, is a product of identity, and vice versa. Her memory of the jigsaw puzzle is both a reminiscent and a significant component of who she is now, both a simulacrum and the original of herself. The correlation between her individual memory and identity parallels that of a region, England, in formation of its history and nationality. "England, England" is the replicated miniature of the former glorious Kingdom as well as a becoming der Ding an sich (the thing itself). In search of the English history and identity, the author satirizes the modern mind's perception of the unreliability and arbitrariness of memory and history, and further explores the alternative to the postmodern discourses by suggesting the probability of inventing innocence glimpsed in children's face "believing while disbelieving." In doing so, the author reconstructs not only the history of Englishness on the ground where nothing seems to be solid, but more importantly also the postmodern theme of relativity in relation to memory, history and identity.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.115-128
• /
• 2012

This paper investigates the effects of diffuser on the acoustical parameters in music hall with consideration of the result of scattering coefficient measurement. A scale model hall of 600 seats with orchestra shell was used for experiments. The materials of 1:50 scale model was chosen through absorption coefficient measurement based on ISO 354. The model was matched to the computer simulation model in terms of reverberation time. In order to evaluate the effect of diffuser location, the measurements were accomplished with and without diffusers according to 7 configurations by diffuser-installed region; sidewall, balcony front, ceiling and so on. The following acoustical parameters were extracted from each measurement case; Reverberation time (RT), Early decay time (EDT), Clarity (C80), Center time (Ts), Sound strength (G) and Temporal diffusion (TD) from the auto-correlation function (ACF) of impulse responses. As a result, the absorption power and diffusion power were increased with number of diffusers. Accordingly RT, EDT and G were decreased by diffuser and the redirection of reflections was occurred briskly. Averaged TD was 6.05 to 6.30 by measurement cases. RT was found to be the most related factor to diffusion power (R = 0.94). The correlation between TD and EDT was high (R = 0.73). In addition, the effects of diffuser-installed location were discussed in terms of acoustical parameter variation.