• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.317-329
• /
• 2019

Slag was collected from the iron-producing furnace site in Saengsoegol, Baegun mountain, where iron was manufactured by a righteous army against Japan in the Gwangyang region; then, the iron-manufacturing technique of the early modern period was investigated through scientific analysis. In the microstructure analysis results of the selected samples, iron bloom was mainly observed together with magnetite and fayalite. In the component analysis results of the compounds, it was confirmed that the furnace was built by using gangue of alkali feldspar or plagioclase series, and the ironmaking work was performed at a high temperature of at least 1050℃, because mullite was identified together with cristobalite and hercynite. Based on the chemical composition, it was speculated that low-grade iron ores were used as raw materials, and it seemed that the yield was low, because the total Fe content of the smelting slag samples was 37.72-49.93%. It was difficult to confirm whether a slag former was used, and it seemed that materials easily obtained nearby were used when the furnace was built, without considering the corrosion resistance. It appeared that the ironmaking work was performed at the Gwangyang Saengsoegol iron-producing furnace based on the direct ironmaking method in an environment that could escape the vigilance of the Japanese Empire to produce weapons that would be used for the resistance against Japan. It seemed that there was neither an advanced ironware production system nor a mass production system, and small-scale works were performed in short periods of time.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.105-116
• /
• 2018

The architecture reflects geographical characteristics such as geographical environments and climate, it has the characteristics and cultural characteristics of the region that has been constructed. Hansen Village constructed in Period of Japanese Occupation at 'Sorok-Island' in Go-heung, Jeollanam-do was also based on this point. The village, which is a ward of Sorok-Island Province, consists of a village in which patients are self-sufficient in economic and social activities, unlike the modern hospital systems where patients and treatments are concentrated in a single room. Additionally, the facilities for patient acceptance were gradually expanded, with limited interaction with external. Sorok-island shows the expansion of the village center where the new village is formed with the increase of the number of the early adopters in the 1910s and the accommodation facility is built, and it gradually increases the necessary space by opening and repairing the existing facilities by the 1990s Change. In addition, the spatial composition of the village can be divided into three types : decentralized, centralized and single-shift ; it has the same causal relationship as the village's formation. The purpose of this study is identifying the uniqueness of Sorok-Island by analyzing the correlation between the formation of a village to accommodate Hansen Patients in Sorok-Island and the spatial Component Factor.

• Journal for History of Mathematics
• /
• v.22 no.2
• /
• pp.27-52
• /
• 2009

This article discusses the contributions of the leader Oswald Veblen, who was the president of AMS during 1923-1924. In 2006, Korea ranked 12th in SCIE publications in mathematics, more than doubling its publications in less than 10 years, a successful model for a country with relatively short history of modern mathematical research. Now there are 192 four-year universities in Korea. Some 42 of these universities have Ph.D. granting graduate programs in mathematics and/or mathematical education in Korea. Rapid growth is observed over a broad spectrum including a phenomenal performance surge in International Mathematical Olympiad. Western mathematics was first introduced in Korea in the 17th century, but real significant mathematical contributions by Korean mathematicians in modern mathematics were not much known yet to the world. Surprisingly there is no Korean mathematician who could be found in MaC Tutor History Birthplace Map. We are at the time, to have a clear vision and leadership for the 21st century. Even with the above achievement, Korean mathematical community has had obstacles in funding. Many people thinks that mathematical research can be done without funding rather unlike other science subjects, even though they agree fundamental mathematical research is very important. We found that the experience of early American mathematical community can help us to give a vision and role model for Korean mathematical community. When we read the AMS Notice article 'The Vision, Insight, and Influence of Oswald Veblen' by Steve Batterson, it answers many of our questions on the development of American mathematics in early 20th century. We would like to share the story and analyze its meaning for the development of Korean Mathematics of 21st century.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.360-371
• /
• 2016

Paul Rudolph's early work in Florida after World War II is a significant example of the regional transformation of typical Modern Architecture through the spatial composition based on the diversity and use of local material and construction methods. Paul Rudolph's concept of a Florida House design is the expression of regional material, construction, and structural system through the spatial extension & connection based on periodical, regional characteristics. The characteristics of the Florida works is the spatial extension & connection design based on the wood structural framework through the various design factors, such as a screen roof, open roof, and internal patio as the spatial extension and link method. Paul Rudolf designed the house using local materials, such as cypress wood and lime block produced near the Florida Area and provided details & technology considering the Florida climate and construction environment. Through studies of Paul Rudolph's Florida works, the Florida Houses can be a prototype of localization, and can be presented as the spatial & technical transformation of design by the historical, cultural, regional background.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.191-201
• /
• 2018

This study aims to analyze the causes and results of the significant changes in the architecture of Japanese architect Kenzo Tange in the 1960s. For a new era and new architecture of Japan, Tange who has been successful in leading the early modern architecture of Japan. since the 1960s, proposed a structuralist approach, deviating from the existing functionalist tendencies that he has pursued. Therefore, in this paper, we examine what structural changes tend to be made in the post-1960s from the functionalist tendencies of the previous period, and what causes the changes to structuralist tendencies. In conclusion, rather than suggesting alternatives to deny the existing concept of functionalism, Tange's theory encompassed both functionalism and structuralism and achieved the effective reorganization of functions while complementing the disadvantages of existing functionalism through functional elements and their structuring.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.186-193
• /
• 2018

Modern manufacturing industries is to produce both precise and robust mechanical parts without failure while they are in service. In order to prevent a part failure for its lifetime, a mechanical design for a part should be examined on a basis of mechanical simulation. A nozzle plate, being a key part in steam engines, changes flow directions of steam in a turbine used in power plant. This paper is to the design and test for part safety and durability. Currently, nozzle plates are fabricated by welding nozzles to their plates. Welding causes some defects on the used materials while they are being manufactured. Another major defect is un-even pitches between welded nozzles. Welding causes phase changes because of high melting temperature of metal. This leads to decay on the welding spots, which weakens their structural strength and then, may lead to early damages on mechanical structures. This research proposes assembly-typed nozzle plate without welding. From the beginning, nozzle and plate are designed for insertion-typed assembly. Nozzle head and foot are designed in accordance with the grooves on outer ring and inner ring of a plate to make mating surfaces. Then the nozzle plate should be proved for structural and fatigue safety before they are put in manufacturing. This research adopts commercial softwares for modeling and mechanical simulation. The test result shows that the design with smaller mating area and deeper insertion produces higher safety in terms of structure and durability. From the conclusion, this paper proposes the assembly-typed nozzle plate to replace the welding typed.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.3
• /
• pp.71-82
• /
• 2024

In modern society, buildings are becoming more complex, and the population is becoming more densely populated. Such large buildings require a variety of evacuation measures, as there is a high possibility of large-scale human casualties due to increased evacuation distance and evacuation time in the event of a fire. Strobe light and exit sign light are used as important evacuation equipment to provide early warning and evacuation directions. In this thesis, we conducted a fire simulation assuming that a fire occurrence point notification function and a strobe light function were added to equipment such as visual alarms and evacuation guidance, and compared and analyzed the difference in evacuation completion time with existing equipment. The scenarios for the simulation were divided into "general fire situations" and "fire location and evacuation exit guidance situation" and the differences in evacuation completion time in the event of a fire were compared and analyzed for each floor from the 1st floor to the 3rd floor. The maximum travel distance to complete evacuation in the case of a fire on the first floor decreased by 80.6 m and the evacuation completion time decreased by 329.4 seconds, and the maximum travel distance to complete evacuation in the case of a second-floor fire decreased by 28.5 m and the evacuation completion time by 438.8 seconds. During the fire on the third floor, the maximum distance decreased until evacuation was completed to 3.4 m, and the evacuation completion time was reduced by 355.6 seconds. It is expected that if the congestion level of evacuation routes is reduced by utilizing the congestion level of evacuation exits when fire alarm systems and evacuation equipment are activated, the evacuation completion time will be further shortened and evacuations will be carried out quickly and safely.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.2
• /
• pp.49-62
• /
• 2004

By delivery means of fashion information, fashion dolls appeared in 18th century. According to development of printing, delivery means of fashion information changed from fashion dolls to fashion plates. Fashion plates offer a colorful and in depth view of the stylish fashions of the past. First fashion plate was Hollars print that was inserted to $\ulcorner$La Galerie des Modes et Costumes Francais$\lrcorner$ and that was published at England in 1643. First fashion plate in France could assumes as winter deshabill that was inserted to $\ulcorner$Le Mercure Galant$\lrcorner$ in 1678. The widespred publication of fashion plates began in England and France in the late 18th century. The first true fashion magazine $\ulcorner$The Ladys Magazine$\lrcorner$ was published at London in 1770. And suddenly similar plates were being published all over Europe. Fashion plates reached their height of popularity in the mid-1800s. Modern age in Europe for fashion magazines golden age, hundreds kinds of fashion magazines published in Europe. Copyright laws in Europe were not enforced, resulting in widespread piracy of fashion designs and plates. After 19th century, America and Europe used much Paris imitation plate. $\ulcorner$The Ladys Magazine$\boxUl$, $\ulcorner$La Gallerie des Modes et Costumes Francais$\lrcorner$, $\ulcorner$Les Cabinet des Modes$\lrcorner$, $\ulcorner$Journal des Dames et des Modes$\lrcorner$, $\ulcorner$The Ladys Monthly Museum$\lrcorner$ were the important fashion magazines in 18th century. $\ulcorner$The Ladys Pocket Magazine$\lrcorner$, $\ulcorner$La Mode$\lrcorner$, $\ulcorner$Le Follet$\lrcorner$, $\ulcorner$La Mode Illustree$\lrcorner$, $\ulcorner$$\ulcorner$The Queen$\lrcorner$ were the important fashion magazines in 19th century. $\ulcorner$Journal des Dames et des Modes$\lrcorner$, $\ulcorner$Gazette du bon ton$\lrcorner$ were the important fashion magazines in early 20th century.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.111-121
• /
• 2016

In the structure of modern houses, a living room is the space most frequently used by family members. In a living room, they rest, talk together, watch TV, study, read books and enjoy hobbies. A living room is furnished with a TV cabinet, a storage closet, a sofa, a bookshelf, a desk and etc. depending on the purposes of activities in it, which can be different in each house. Furniture is the required tool for indoor architectural space and humans to lead a life. In most families, a man and a woman marry each other and become man and wife, go through the honeymoon phase, give birth to one or two children and become a family with three or four members. According to the children's growth cycle from birth to infancy, early childhood, childhood, adolescence, youth and adulthood, furniture layout and kinds of furniture in a living room change. Depending on the family life cycle, most parents of young children try to help their children to form good habits of reading books and studying for their future. As for the environmental elements interrupting reading and studying, watching TV and using smart phones excessively are being regarded as problems. As the number of two-income families is increasing in this era when many women are participating in the social activities with the government's encouragement, children are having more time.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.343-363
• /
• 2018

Classical film narrative fails to reflect the increasing complexity of modern society. In this era of film narrative crisis Hirokazu Koreeda presents a new solution. The director puts an emphasis on neutral valuation over subject matter rather than empathy of audiences which leads to a biased point of view. Thus Hirokazu Koreeda choose space over story as a critical narrative enabler. Two qualitatively opposite spaces are presented and the boundary space of the two are set as a main background where the valuation over the spaces waves up and down. Audiences who get accustomed to a one-sided value judgement led by storytelling can be neutralized by pendulum movement of valuation. The specific methods of using space as a main tool of value neutralization have changed through the director's filmography. Space had been thoroughly designed through the storyboard in early works. Later the director let audiences experience the spaces to evoke a sense of place.