• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.246-252
• /
• 2016

Since thermal power plant (TPP) equipment is operated under very high pressure and temperature, failures of the equipment give rise to severe losses of life and property. To prevent the losses, fault detection method is, therefore, absolutely necessary to identify abnormal operating conditions of the equipment in advance. In this paper, we present Mahalanobis distance (MD) based fault detection method for steam boiler tube in TPP. In the MD-based method, it is supposed that abnormal data samples are far away from normal samples. Using multivariate samples collected from normal target system, mean vector and covariance matrix are calculated and threshold value of MD is decided. In a test phase, after calculating the MDs between the mean vector and test samples, alarm signals occur if the MDs exceed the predefined threshold. To demonstrate the performance, a failure case due to boiler tube leakage in 200MW TPP is employed. The experimental results show that the presented method can perform early detection of boiler tube leakage successfully.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.105-113
• /
• 2018

Purpose: The purpose of this study was to investigate the effects of the insertion depth of an immediately loaded implant on the stress distribution of the surrounding bone and the micromovement of the implant using the three-dimensional finite element analysis. Materials and methods: A total of five bone models were constructed such that the implant platform was positioned at the levels of 0.00 mm, 0.25 mm, 0.50 mm, 0.75 mm, and 1.00 mm depth from the crest of the cortical bone. A frictional coefficient of 0.3 and the insertion torque of 35 Ncm were simulated on the interface between the implant and surrounding bone. A static load of 178 N was applied to the provisional prosthesis with a vertical load in the axial direction and an oblique load at $30^{\circ}$ with respect to the central axis of the implant, then a finite element analysis was performed. Results: The implant insertion depth significantly affected the stress distribution on the surrounding bone. The largest micromovement value of the implant was $39.34{\mu}m$. The oblique load contributed significantly to the stress distribution and micromovement in comparison to the vertical load. Conclusion: Increasing the implant insertion depth was advantageous in dispersing the concentrated stress in the cortical bone and did not significantly affect the micromovement associated with early osseointegration failure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.722-727
• /
• 2006

Most of impacted teeth reported are permanent teeth. Impaction of primary tooth caused by primary failure of eruption is rare and the most of impacted primary tooth are second primary molars. The etiology of a primary molar impaction would appear to be a physical barrier, early ankylosis of the tooth, abnormal development of the primary molar germ or malposition of the successor bud. Transposition has been described as an interchange in the position of two teeth within the same quadrant of the dental arch. It is most commonly seen with canine and lateral incisor teeth, but is rarely associated with the primary dentition. The two cases show the transposition of impacted primary molar and the tooth germ of second premolar in their clinical and radiographic examinations. In case 1, lower second primary molar was deeply impacted inferiorly to the tooth germ suspected to be a second premolar. In case 2, impacted all second primary molars were positioned inferiorly to the tooth germs suspected to be the successors. We extracted all second primary molars under general anesthesia and the extracted tooth germs appeared to be second premolars.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.129-136
• /
• 1996

Influence diagram method is applied to containment performance analysis of Young-Gwang 3&4 in an effort to overcome some drawbacks of current containment performance analysis method. Event tee methodology has been adopted as a containment performance analysis method. There are, however, some drawbacks on event tree methodology. This study is to overcome three major drawbacks of the current containment performance analysis method : 1) Event tree cannot express dependency between events explicitly. 2) Accident Progression Event Tree (APET) cannot represent entire containment system. 3) It is difficult to consider decision making problem. To resolve these problems, influence diagrams, is proposed. In the present ok, the applicability of the influence diagrams has been demonstrated for YGN 3&4 containment performance analysis and accident management strategy assessments of this study are in good agreement with those of YGN 3&4 IPE. Sensitivity analysis has been peformed to identify relative important variables for each early containment failure, late containment and basemat melt-though. In addition, influence diagrams are used to assess two accident management strategies : 1) RCS depressurization, 2) cavity flooding. It is shown that influence diagrams can be applied to the containment performance analysis.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.413-427
• /
• 2013

Thin Spray-on Liners(TSLs) based on polymer materials have been considered as an alternative to shotcrete and wire mesh in relatively fair rock conditions, and used in mines since 1990s. Nevertheless, Few experimental studies on their mechanical properties necessary for the evaluation of their bearing capacities as a support member have been carried out. In this study, tensile and bond strengths of two kinds of TSLs with different material compositions were measured at the age of 7 days. In addition, two kinds of bending tests proposed by EFNARC (2008) to simulate representative failure mechanisms of TSLs were carried out on the same materials and curing age as in tension and pull-out tests. From the tests, tensile strength of a TSL is shown to increase as its content of polymer is higher. In contrast, its bond strength seems to be in inverse proportion to its polymer content. Especially, the TSL material in which a cementitious component is included with relatively smaller polymer content shows a faster hardening characteristic which results in higher resistance to de-bonding between a TSL and a substrate. As a result, it is shown that the performance of TSLs might be dependent upon its corresponding polymer content.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.368-375
• /
• 2013

Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

• Korean Journal of Veterinary Service
• /
• v.42 no.4
• /
• pp.201-216
• /
• 2019

Porcine reproductive and respiratory syndrome (PRRS) is characterized by reproductive failure in sows and respiratory distress in all age pigs. Porcine respiratory disease complex (PRDC) is a disease caused by opportunistic bacterial infection secondary to a weakened immune system by a preceding respiratory infection. In this study, we tried to compare the immune responses in PRRS and PRDC groups to clearly characterize the disease severity. Eighty-five pigs were infected with various Korean field PRRS virus strains. Infected animals were classified into PRRS (n=32) and PRDC (n=53) groups based on lung lesions such as interstitial pneumonia, suppurative pneumonia, and pleuropneumonia. The immune cell population of bronchoalveolar lavage cells (BALc) was evaluated on 14 and 28 days post infection (dpi) and PMBC cytokine expression was measured on 0, 3, 7, 14 dpi to investigate early inflammatory reactions. Pulmonary lesion severity was negatively correlated with alveolar macrophage (AM) in both PRRS and PRDC groups on 14 and 28 dpi. AM in BALc was less populated in PRDC group on 28 dpi compared to PRRS group. AM in BALc was significantly less populated in PRDC group on 28 dpi compared to 14 dpi. In addition, cytotoxic T lymphocyte (CTL) in BALc was higher populated in PRDC group on 14 dpi and 28 dpi compared to PRRS group. In the case of PBMC cytokine TNF-α, IFN-α, IL-1β, IFN-γ, FoxP3, and IL-2, the PRRS group showed higher expression than the PRDC group on 7 dpi, 14 dpi, 7 dpi, 14 dpi, 14 dpi, and 14 dpi, respectively. On the other hand, in the case of IFN-β, IL-6, IL-8, IL-4, and IL-17, the PRDC group showed higher PBMC cytokine expression at 14 dpi, 7 dpi, 14 dpi, 3 dpi, and 3 dpi, respectively, than the PRRS group. Based on these results, our study could characterize differential immune responses in pigs with PRRS or PRDC.

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.785-791
• /
• 2002

The results of reoperative valve replacement can be improved if appropriate analysis for the risk of reoperation was achieved. The purpose of our study was to analyze the results of reoperations for failure of bioprosthesis, and to define the risk factors in high-risk populations for reoperative procedures. Material and Method The series of 46 consecutive patients who had undergone first reoperative replacement for failed bioprosthesis between 1993 and 2001 were reviewed retrospectively. Mean age was 42 $\pm$ 12 years, mean body surface area was 1.52 $\pm$0.15 $m^2$. The reoperative procedure comprised of 36 MVR, 8 DVR, and 2 AVR. The first operation comprised of 2 DVR, 1 AVR, and 43 MVR. Factors which were choose to assess a predictor of results in reoperative valve replacement were sex, old age(＞60 years), early age at first operation(＜30 years), long interval between first and redo operation(.15years), poor NYHA functional class(＞3), LV dysfunction(LVEF＜45%), long operation time(＞8hours), endocarditis, combined procedures, and renal insufficiency, Result : Overall mortality was 4.3%(2 cases). The risk factors that influenced postoperative complications and unexpected postoperative results were lower ejection fraction(p＝0.012), older age(p＝0.045), endocarditis(p＝0.023), long operation time above 8 hours(p＝0.027). There was no statistically significant factor influencing hospital mortality. Conclusion : No factor influenced the mortality. Better results could be achieved if reoferation was performed carefully in poor left ventricular function, old aged patient, and with endocarditis. Effort to shorten the operation time would be helpful on postoperative results.

• Journal of Chest Surgery
• /
• v.41 no.4
• /
• pp.463-468
• /
• 2008

Background: Descending necrotizing mediastinitis (DNM) is a life-threatening cervico-mediastinal infection extending from the oropharynx or periodontal space. We reviewed clinical outcomes of DNM patients that underwent surgical management. Material and Method: We analyzed the demographic and surgical data from 8 patients (6 males and 2 females) that underwent surgical management for DNM between August 2003 and August 2007. Result: The mean age was $56.6{\pm}12.3$ ($34{\sim}72$) years, Types of DNM were I (n=2), IIA (n=1), and IIB (n=5), based on the classification system of Endo et al. Four patients were septic at the time of operation. The infectious organism was identified in three cases and turned out to be Streptococcus. ICU stay was $24.3{\pm}17.9$ ($3{\sim}58$) days, and hospital stay was $49.1{\pm}33.8$ ($20{\sim}125$) days, There were two deaths (25%), both of which were due to multi-organ failure. Conclusion: Despite aggressive surgical drainage and appropriate medical management, DNM still had a high mortality rate, Early diagnosis and prompt surgical intervention are key to DNM management. In addition, transcervical drainage should be used in limited disease only.

• Journal of Science and Technology Studies
• /
• v.15 no.1
• /
• pp.145-180
• /
• 2015

Human Genome Project was a big science done by United States, U.K., France, China, Germany and Japan. But in Korea HGP was not constructed because of lack of governmental funding and failure to attract relevant actors' attention in spite of small voices from early genome researchers and some family members of patients with incurable diseases. This article does not argue that HGP in Korea was an undone science, a concept claimed by Scott Frickel, et al. Instead, it shows the historical fact that HGP was not constructed in Korea in 1990s and analyzes how genomic researches could become possible in Korea in the post-genomic age using the framework of triple-helix. In Korea, researchers have constructed hybrid networks and organizations that intermingles laboratories of university, industry, and government to conduct genomic researches which requires a lot of financial funding. This structure is different from the entrepreneurial university seen in developed countries such as the United States. Using two examples, this article shows that founding a start-up company by university researchers was not an option as in the United States, but a necessity in order to obtain enough funding to conduct genomic researches in Korea. Otherwise, researchers in Korean universities had to form hybrid networks with government to obtain small amount of funds to conduct researches. I argue that this phenomenon shows multifaceted characteristics of institutional structures regarding genomic researches in Korea.