• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.83-84
• /
• 2011

This study provides floor vibration analysis for a factory constructed by ES-beam using field measured acceleration data. The natural frequencies of the first two modes of floor are extracted from measured data. With this information, a system identification has been performed to produce a numerical model representing existing floor. The peak magnitudes of acceleration for one man walking heel drop load from experiment and numerical model are analyzed using ISO vibration criteria and AIJ vibration performance criteria. The results show that there is no problem in use of ES-beam.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.133-136
• /
• 2011

This study concerned with the steel beam of bonding method and bonded steel beams by this method and both ends of different height, steel beams and steel beams in the center makes the junction. Both ends and the central part of steel beams connecting the lower flange by additional combining steel plates to convey stress, the stress to focus on the beam connections are passed to both ends of steel beams, and strength of beam connections is improved and steel structural beams is proposed to minimize the loss by Incision. If you use the developed method, the construction period is shortened, and reducing the amount of material can decrease the cost and reduction in floor height can be maximized business feasibility.

• 한국광학회지
• /
• 제35권3호
• /
• pp.107-114
• /
• 2024

본 연구에서는 다채널 결맞음 빔결합 시스템에서 공분산 행렬 적응 진화 전략(covariance-matrix-adaptation-evolution-strategy, CMA-ES) 알고리즘의 구현 가능성을 실험적으로 확인하였다. 파장이 635 nm인 결맞음 광원과 함께 공간 광 변조기를 다채널 위상 변조기 배열로 활용하는 다채널 결맞음 빔결합 시스템을 구성하고, 확률적 병렬 경사 하강(stochastic parallel gradient descent, SPGD) 및 CMA-ES 알고리즘을 결맞음 빔결합 시스템에 적용하여 획득한 두 알고리즘의 동작 특성을 비교하였다. 사각 구조인 16채널 및 벌집 구조인 19채널 결맞음 빔결합 시스템에서 두 알고리즘의 동작 특성을 평가한 결과 두 알고리즘의 동작 특성은 주어진 조건에서 평균적으로 유사하였으나, CMA-ES 알고리즘이 SPGD 알고리즘에 비해 초기 위상값 설정에 따른 동작 특성 변동이 상대적으로 작아 보다 안정적으로 동작할 수 있음을 확인하였다. 본 연구는 저자가 아는 범위 내에서 CMA-ES 위상제어 알고리즘을 다채널 결맞음 빔결합 시스템에 적용한 최초의 원리증명 시연이며, 향후 CMA-ES 위상제어 알고리즘에 기반한 다채널 결맞음 시스템에서 채널 수 증가 혹은 외부 위상잡음 효과 등을 실험적으로 연구할 때 유용하게 활용될 수 있을 것으로 기대된다.

• 한국광학회지
• /
• 제34권1호
• /
• pp.1-12
• /
• 2023

본 연구에서는 다채널 결맞음 빔결합 시스템을 위한 위상제어 방식으로 covariant matrix adaption evolution strategy (CMA-ES) 알고리즘 및 stochastic parallel gradient descent (SPGD) 알고리즘을 결합한 이중 위상제어 알고리즘을 제안하고 그 동작 특성을 전산모사를 통해 분석한다. 제안하는 CMA-ES/SPGD 이중 위상제어 알고리즘은 결합된 최종 출력광 세기가 미리 설정된 특정값에 도달하기 전까지는 그 위상제어 최적화를 CMA-ES 알고리즘을 통해 진행하고, 그 이후에는 SPGD 알고리즘으로 전환하여 진행하는 순차적 이중 구조를 취한다. 이를 이상적인 7채널과 19채널 광섬유 결합기 기반 결맞음 빔결함 시스템에 적용하였을 때, 위상제어 최적화 평균 수렴시간이 기존의 SPGD 알고리즘만 단독적용한 경우에 비해 약 10% 단축됨을 확인하였다. 뿐만 아니라, 동일한 결맞음 빔결함 시스템에서 실제 환경과 유사하게 각 채널광에 위상잡음을 부가적으로 인가한 경우, 본 연구에서 제안하는 이중 위상제어 알고리즘을 적용할 경우 주어진 조건에서 그 평균 수렴시간이 기존의 SPGD 알고리즘만 단독적용한 경우에 비해 7채널 시스템의 경우 약 17%, 19채널 시스템의 경우 약 16-27% 정도 단축됨을 확인하였다. 본 연구에서 제안한 CMA-ES/SPGD 이중 위상제어 알고리즘은 향후 실제 대기 환경과 같이 위상잡음 효과를 무시할 수 없는 조건에서 결맞음 빔결합을 구현시 매우 유용하게 활용될 수 있을 것으로 기대된다.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.318-324
• /
• 2016

Commercial split beam echosounder (ES70) installed on a krill fishing vessel was calibrated in order to utilize it in estimating biomass of Antarctic krill (Euphausia superba). The method of calibration was to analyze the difference between the bottom backscattering strength of the commercial split beam echosounder (i.e. ES70) and the scientific echosounder (i.e. EK60) at one of transects near South Shetland Islands designated by CCAMLR. 38 kHz and 120 kHz were used for the calibration, and krill swarm signal levels obtained from multi frequencies, was examined to verify the calibration result. The analysis result indicated possibility of calibration by bottom backscattering strength, since the proportion of krill swarm signals within 2 dB < $S_{V\;120\;kHz-38\;kHz}$ < 12 dB (i.e. a common $S_{V\;120\;kHz-38\;kHz}$ range of 38 kHz and 120 kHz to be an indicator of Antarctic krill) over the total acoustic signals were 26.95% and 92.04%, respectively before and after the calibration.

• Imaging Science in Dentistry
• /
• 제43권2호
• /
• pp.129-134
• /
• 2013

Turner syndrome (TS) is one of the most common chromosomal abnormalities, with an estimated frequency among female live births of 1/2,000-3,000. The syndrome is characterized by the partial or complete absence of one X chromosome (45,X karyotype). We reported a unique case of a 40-year-old woman with TS accompanying unexpected elongated styloid process specific to Eagle syndrome (ES) and followed up-prolactinoma. The present article is the first report to define the cone-beam computed tomographic (CBCT) features of TS accompanying ES. Patients with TS carry various risks that make treatment more complicated; thus advanced imaging techniques for proper treatment and follow-up are extremely important. In the light of CBCT examination, craniofacial abnormalities specific to TS and accompanying syndromes such as the crowding of teeth especially in the maxillary anterior region caused by maxillary narrowness, micrognatic maxilla and mandible, relative mandibular retrusion, malocclusion, open-bite, and an elongated styloid process (length of 32.7 mm) on the right side were illustrated in detail.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.40-43
• /
• 2016

Beam trajectory is needed to be controlled in heavy ion accelerator system. Quadruple magnets are widely used in heavy ion accelerator for focusing the transporting particles. A quadruple triplet system which consists of three consecutive quadrupoles, Q1, Q2 and Q3, is used to control beam trajectory at a focused position. Q1 and Q3 have symmetry with respect to Q2. The beam trajectory in magnet system is affected by higher order fields existed in real fields. For quadrupoles, the representation simulation of beam trajectory was carried out to study the beam trajectory and to estimate an effect of higher order field in triplet system. SCALA program was used to simulate the beam trajectory in $Opera^{TM}$. SCALA can analyze a large number of beam trajectories at the same time by adjusting the size of finite element of the emitter. With $Opera^{TM}$ and $Matlab^{TM}$ programs, the position of focused beam spot in quadruple triplet system can be increased or decreased using evolution strategy (ES) method, therefore the length of triplet system can be controlled. Finally, the quadruple triplet system with the appropriate length and expected beam spot range was suggested in this paper.

• 대한전자공학회논문지SP
• /
• 제43권6호
• /
• pp.105-112
• /
• 2006

ES 시스템에서 레이더를 식별하는 능력을 향상하기 위해서는 주파수, 펄스반복주기 및 펄스폭 등과 같은 기본 식별변수 이외에 스캔특성을 추정하는 기법이 필요하다. 본 논문에서는 원형스캔 레이더의 스캔특성인 스캔주기와 스캔빔폭을 추정하는 방법을 제안하였다. 제안된 방법은 주기함수의 자기상관관계 특징을 이용하여 스캔주기를 추정한다. 그리고 제안된 스캔주기추정기법과 선형 보간법을 이용하여 스캔빔폭을 추정한다. 제안한 방법의 성능을 입증하기 위해 다양한 모의신호에 대한 실험결과를 제시하였다.

• 정보과학회지
• /
• 제1권1호
• /
• pp.72-74
• /
• 1983

Traditionally, polynomials have been used to approximte functions with prescribed values at a number of points(called the knots) on a given interal on the real line. The method of splines recently developed is more flexible. It approximates a function in a piece-wise fashion, by means of a different polynomial in each subinterval. The cubic spline gas ets origins in beam theory. It possessed continuous first and second deriatives at the knots and is characterised by a minimum curvature property which es rdlated to the physical feature of minimum potential energy of the supported beam. Translated into mathematical terms, this means that between successive knots the approximation yields a third-order polynomial sith its first derivatives continuous at the knots. The minimum curvature property holds good for each subinterval as well as for the whole region of approximation This means that the integral of the square of the second derivative over the entire interval, and also over each subinterval, es to be minimized. Thus, the task of determining the spline lffers itself as a textbook problem in discrete computer programming, since the integral of ghe square of the second derivative can be obviously recognized as the criterion function whicg gas to be minimized. Starting with the initial value of the function and assuming an initial solpe of the curve, the minimum norm property of the curvature makes sequential decision of the slope at successive knots (points) feasible. It is the aim of this paper to derive the cubic spline by the methods of computer programming and show that the results which is computed the all the alues in each subinterval of the spline approximations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.77-81
• /
• 2003

SDM (Structural Dynamics Modification) is a tool to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary (modifying) structures. In this paper, the goal of the optimal SDM is set to maximize the natural frequency of a base plate structure by attaching serially-connected beam stiffeners. The design variables are chosen as positions of the attaching beam stiffeners, where the number of stiffeners is considered as a design space. The problem of non-matching interface nodes between the base plate and beam stiffeners is solved by using localized Lagrange multipliers, which act to glue the two structures with non-matching interface nodes. As fer the cases of non-matching interface nodes problem, the governing equation of motion of a structure can be considered from the viewpoint of a topological modification, which involves the change of the number of structural members and DOFs. Consequently, the eigenpairs of the beam-stiffened plate structure are obtained by using an eigen reanalysis technique of topological modifications. Evolution Strategies (ES), which is a probabilistic population-based optimization technique that mimics the principles from biological evolution in nature, is utilized as a mean for the optimization.