• 전기학회논문지P
• /
• 제64권4호
• /
• pp.251-255
• /
• 2015

Chiller system plays an important role of maintaining room temperature constantly by supplying chilled water to Heating, Ventilating and Air Conditioning(HVAC)or area room cooler equipment during plant normal operation or accident condition. Chiller failures are one of the most frequently occurring equipment failures. If the types of chiller failures are analyzed and grouped thoroughly, it would be helpful to make chiller maintenance strategy at the plants. That would enhance equipment reliability of chiller in the end. In this paper, chiller failure data during three years were analyzed and categorized by specific failure code. In addition, the various proposals to improve equipment reliability of chiller were suggested such as Preventive Maintenance Optimization(PMO) strategy and performance monitoring reinforcement and so on.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.489-494
• /
• 2006

Electronic and telecommunication industries are constantly trying to develop compact components having high power density. Therefore, a proper heat dissipation method is very important to allow reliable operation of the telecommunication equipment. In this study, a hybrid refrigeration system for a telecommunication equipment room was designed to save energy consumption and improve reliability of the compressor In addition, the performance of the hybrid refrigeration system was measured with a variation of outdoor load. The designed hybrid refrigeration system for the telecommunication equipment shelter saved the energy approximately 50%e at the mode switch temperature of $8.3^{\circ}C$.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.47-56
• /
• 2021

In the management of aged aircraft, used avionics equipment is replaced with new ones to improve the performance and extend the life cycle of the aircraft. In this case, considering airworthiness, it is necessary to check whether the aircraft has sufficient electricity in the electric generator or the electrical distribution system, in accordance with the maximum electricity consumption of the new avionics equipment. Accordingly, this paper reviews a few airworthiness standards and guidelines associated with the electrical load analysis when an avionics equipment is upgraded in an aged aircraft, and proposes an optimization method for the electrical load analysis. In addition, it verifies the validity of the proposed method via the QFD theory, and is currently available for upgrading the performance of aged aircraft.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.677-684
• /
• 2016

차선의 야간 시인성 향상을 위하여 차선도색 자동화 장비에 대한 개발 필요성이 대두되고 있다. 본 연구의 목적은 차선도색 장비의 성능을 생산성, 안전성 및 품질과 같은 다양한 측면에서 평가할 수 있는 방법론을 제시하고, 현장실험을 바탕으로 수동식 장비와 자동식 장비의 성능을 종합적으로 비교 및 분석하고자 한다. 연구결과는 다음과 같다. 차선도색 장비의 성능을 생산성, 안전성 및 품질 측면에서 분석할 수 있는 방법론을 제시하였다. 생산성 측면에서 차선도색 자동화 장비는 기존 수동식 장비와 비교하여 156.3%의 생산성 달성비율을 얻을 수 있는 것으로 분석되었다. 전문가 자문 및 문헌고찰을 바탕으로, 차선도색 단위작업의 안전성 요인 12개와 품질 요인 10개를 도출하였다. AHP 기법을 활용하여 안전성 및 품질 요인별 중요도를 산정하였다. 안전성 및 품질 측면에서 자동화 장비 개발로 인한 성능평가 결과, 안전성 향상률 49.8%와 품질 향상률 47.2%를 기대할 수 있는 것으로 분석되었다. 본 연구에서 제시한 성능평가 방법론을 통하여 차선도색 장비에 대한 객관적이고 정량적인 개발 타당성 및 기대효과 제시가 가능할 것으로 판단된다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.79-90
• /
• 1995

The material handling equipment selection, that is a key task in the material handling system design, is a complex, difficult task, and requires a massive technical knowledge and systematic analysis. It is invaluable to justify the selected equipment model by the performance evaluation before its actual implementation. This paper presents an intelligent knowledge-based expert system called "IMESE" created by authors, for the selection and evaluation of material handling equipment model suitable for movement and storage of materials in a manufacturing facility. The IMESE is consisted of four modules: a knowledge base to select an appropriate equipment type, a multiple criteria decision making procedure to choose the most favorable commercial model of the selected equipment type, a database to store the list of commercial models of equipment types with their specifications, and simulators to evaluate the performance of the equipment model. The whole process of IMESE is executed under VP-Expert expert system environment.vironment.

• 한국지리정보학회지
• /
• 제19권1호
• /
• pp.53-63
• /
• 2016

본 논문은 측량 산업 현장에서 다양하고 고도화된 측량장비에 대한 법제도 개선의 필요성에 따라 측량장비 성능검사 규정, 기준, 방법 및 절차 등에 대하여 개선사항을 제시하고자 하였다. 연구수행은 우선 측량장비 성능검사와 관련하여 기존 법제도(공간정보의 구축 및 관리 등에 관한 법률, 국가표준기본법, ISO 17123, JIS B 7912)를 조사 분석하고 국제표준화기구 및 한국인정기구 표준조사를 통해 측량장비 성능검사 적용을 위한 개선사항을 제시하였다. 구체적으로 말하면 첫째, 측량장비 성능검사 주기와 관련하여 기기의 정밀정확도, 안정성, 사용목적 및 사용빈도 등을 감안하여 2년을 제시하였다. 둘째, 측량장비 성능기준 개선과 관련하여서는 광파거리측정기 및 토털스테이션에 대해 등급별 측정거리 폐지와 단일프리즘 기준의 정밀도 상향 또는 등급 간 조정을 제시하였다. 셋째, 측량장비 성능검사 방법 개선으로 토털스테이션의 경우 그 주된 기능이 3차원 좌표측정에 있으므로 좌표측정의 정밀도(반복성)을 평가방법으로 사용하는 것을 제안하였다.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.83-89
• /
• 2013

Power distribution system has been changed from radial system to closed loop or mesh system due to connection of distributed generation growth. Data from distribution equipments which are installed at distribution line is required to be accurate for the performance of DMS(Distribution Management System). This paper analyzes the voltage measurement data from distribution equipment. However, the results of the analysis are confirmed to have some errors in voltage measurement data from distribution equipment. These errors come from aging of voltage sensor in distribution equipment and inaccurate data transfer to FRTU(feeder remote terminal unit) through the controller. The main problem is that the voltage measurement data of distribution equipment can not be assessed after it's first installation at the distribution line. The voltage measurement accuracy assessment system is to assess the voltage measurement data from distribution equipment on hot-line. This study had a field test to verify the performance of system.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• 대한지역사회영양학회지
• /
• 제11권3호
• /
• pp.374-382
• /
• 2006

The purpose of the study was to investigate the effects of the characteristics of dietitians, the characteristics of school food services, equipment ratio of HACCP facility/equipment and perception of barriers to HACCP implementation on external and internal audit of food safety/sanitation management performance in school food service. An e-mail survey was conducted with 144 dietitians in Gyeongbuk Province. A response rate was 57.6% (N = 83) and data was analyzed using SPSS windows (ver. 12.0). Dietitian perceived facilities/equipment-related and stakeholder-related as the big barriers in implementing a HACCP system. Total scores of sanitation/safety management performance for external and internal audit were similar at 92 and 91 out of 100, respectively. 'Facilities/equipment' and 'HACCP system' categories in both external and internal audit were rated the lowest. As dietitian perceived facilities/equipment-related (p < 0.001) and stakeholder-related (p < 0.05) barriers to HACCP implementation were greater, the scores of the external and internal audits were significantly lower. As dietitian perceived barriers for all categories were greater, the scores of internal audits were significantly lower (p <0.05). As a result of multiple regression analyses, the scores of the external audit was positively associated with career as a school food service dietitian, but was negatively associated with barriers related to facility/equipment, while the scores of the internal audit was negatively associated with barriers related to facility/equipment and employees. This study suggests that supporting programs on securing the facilities/equipment and employee training are needed for successful HACCP implementation in school food service.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.187-199
• /
• 2020

Purpose: This study suggests how to upgrade performance certification technology. Current performance certification of aviation security equipment and the requirements thereof were analyzed. Methods: The performance certification of aviation security equipment worldwide and identified issues with the domestic certification system were compared. The government must upgrade certification in terms of technical standards, the assessment methodology used, and the operating system. Results: Three principal conclusions were drawn. First, certification requirements must be based on a review of the technical literature and real-world experience. Second, development priorities must be set by reference to assessment techniques. Third, both research on the certification system and improvements thereof are essential. Conclusion: Certification of aviation security equipment performance requires gradual upgrading.