• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.273-285
• /
• 2019

This study is aimed to interpret the raw material characteristics and manufacturing technology through physical, mineral and geochemical analysis of the brown-glazed stonewares and roof tiles excavated from the Hong Nang Sida temple in Laos, which was built in the 12th century. The glaze of brown-glazed stoneware is a typical lime serial with CaO content of more than 15 % and they were vitrified. The body is the combination of quartz, mullite and cristobalite, but had not vitrified texture, and therefore, which is assumed to have been fired more than 950 ℃. Meanwhile, The roof tiles are unglazed and its outer color is reddish brown, whitish grey and bluish grey. The bluish gray tiles has sandwich structure, which seem to experience imperfect reducing environment. The tile samples with a number of amorphous iron oxide nodule had a very similar chemical composition. In conclusion, it is assumed that the clay source was made from raw material produced from the same bedrock. The firing temperature of roof tiles were divided into less than 900 ℃, 900~950 ℃ and greater than 950 ℃ according to detection of micas, hercynite and mullite.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.221-232
• /
• 2017

In recent years, the development and market participation of major makers of next-generation eco-friendly vehicles has been accelerating. Consumer interest has also increased. Consumer characteristics, consumption type, characteristics of next-generation eco-friendly vehicles, and government policies on next-the results of this study are as follows. As a result of this study, it was found that the characteristics of consumers (by sex, age, monthly average income), types of consumers (price value pursuit type, individual value pursuit type), There was no significant difference between the consumers, and the purchasing intention was not significantly different by gender, age, and monthly income, but there was a significant difference in purchase intention according to the type of consumer. The positive effects of consumer purchase behavior on brand image, color, design, etc, have positive (+) effect on eco - friendly vehicles. And social environment value seeking type among consumer types are significant in relation to purchase intention. To have three support the government's carbon dioxide (per ton of 5,000 won, per ton of 10,000 won), national or local government vehicle price support directly gasolin tax, disel tax, carbon taxes, such as fuel-related tax relief, etc. was found to have positive effect.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.3
• /
• pp.414-421
• /
• 2012

Moisture content of muffin tended to increased as increasing mixing rate of maesangi. For crude protein, sample group of 9% replaced by maesangi powder was the highest. For crude fat and crude ash, there was no significant difference among sample groups. The average height of muffin was 4.7 cm, but was no significant difference among sample groups. Volume of muffin has been gradually increased as increasing mixing rate of maesangi powder, but was no significant difference among sample groups. From the SEM (scanning electron microscope) result, thick cell wall and rough blowholes were appeared. L-, a and b-values of muffin was declined as per increase of mixing rate of maesangi powder. Hardness was inclined as per increase of mixing rate of maesangi powder. There were significant differences between sample groups and reference group for adhesiveness, springiness and cohesiveness, but was no significant difference among sample groups. For gumminess, sample group of 9% replaced by maesangi powder was the highest, but there were no significant difference from sample groups of 3% and 6% replaced by maesangi powder. Chewiness was inclined as per increase of mixing rate of maesangi powder, and sample group of 9% replaced by maesangi powder was the highest. From sensory test result, sample group of 9% replaced by maesangi powder was the highest for color, and there were significant differences among sample groups. Sample group of 6% replaced by maesangi powder was the highest for flavor and taste, and there were significant differences among sample groups. Sample groups of 6% and 9% replaced by maesangi powder were the highest for texture. Sample group of 9% replaced by maesangi powder was the highest for overall preference. From all these results, the most suitable one would be the sample group of 9% replaced by maesangi powder.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.277-286
• /
• 2006

Population ecology of Cobitis tetralineata was examined at Churyeong Stream, Seomjin River, Korea. C. tetralineata inhabited on the sand bottoms with $10{\sim}20cm/see$ in current velocity, and $30{\sim}150cm$ in water depth. This species was active on the sand during the daylight hours from March to October, but they hibernated in the inside of the sand during the winter season. Sex ratio of female to male was 1:0.57, and female was $20{\sim}30mm$ (TL) larger than male. The age group of C. tetralineata (female) population showed that the $20{\sim}40mm$ group is 0+ years old, the $45{\sim}65mm$ group 1+ years old, the $65{\sim}90mm$ group 2+ years old, and the group longer than 90 mm over 3 years old. Males $13{\sim}14$ months old after hatching had lamina circularis at the base of its pectoral fin as a secondary sexual character. And in its spawning season, lateral color pattern of male was changed as a sexual dimorphism. The spawning season may be from late June to middle July, $22{\sim}26^{\circ}C$ water temperature. The average number of mature eggs in ovary was about $1,288{\pm}583(474{\sim}2,976)$, egg diameter was about $0.98{\pm}0.1mm$. C. tetralineata fed mainly on Chironomidae, Arcellidae, Branchioda and Algae. The feeding rate was the highest in April and September, but they did not fed in the winter.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.371-380
• /
• 2017

PURPOSE. The aim of this study is to evaluate and compare the stress distribution in Locator attachments in mandibular two-implant overdentures according to implant locations and different loading conditions. MATERIALS AND METHODS. Four three-dimensional finite element models were created, simulating two osseointegrated implants in the mandible to support two Locator attachments and an overdenture. The models simulated an overdenture with implants located in the position of the level of lateral incisors, canines, second premolars, and crossed implant. A 150 N vertical unilateral and bilateral load was applied at different locations and 40 N was also applied when combined with anterior load at the midline. Data for von Mises stresses in the abutment (matrix) of the attachment and the plastic insert (patrix) of the attachment were produced numerically, color-coded, and compared between the models for attachments and loading conditions. RESULTS. Regardless of the load, the greatest stress values were recorded in the overdenture attachments with implants at lateral incisor locations. In all models and load conditions, the attachment abutment (matrix) withstood a much greater stress than the insert plastic (patrix). Regardless of the model, when a unilateral load was applied, the load side Locator attachments recorded a much higher stress compared to the contralateral side. However, with load bilateral posterior alone or combined at midline load, the stress distribution was more symmetrical. The stress is distributed primarily in the occlusal and lateral surface of the insert plastic patrix and threadless area of the abutment (matrix). CONCLUSION. The overdenture model with lateral incisor level implants is the worst design in terms of biomechanical environment for the attachment components. The bilateral load in general favors a more uniform stress distribution in both attachments compared to a much greater stress registered with unilateral load in the load side attachments. Regardless of the implant positions and the occlusal load application site, the stress transferred to the insert plastic is much lower than that registered in the abutment.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.369-375
• /
• 2015

Purpose: The current study was performed to estimate the changes in reading speed and blinking rate according to different background colors when reading paper book and further investigate their correlation. Methods: Twenty-nine adults (10 males, 19 females) who consented to the present study and had no ocular disease, ocular surgery history showing normal binocular vision were participated into the study. The subjects were asked to read the novels with black letter printed on white, red, green and blue background for 15 min, respectively. Then, the reading speed per page and blinking rate per page were measured during reading and analyzed according to background colors. Results: Reading speed per page according to the background color showed a tendency to accelerate in the white and green background as the reading time increased however, it was almost unchanged in the blue background and rather decelerated in the red background. On the other hand, the blinking rate per page tended to decrease in all background as the reading time was increased however, the smallest reduction was shown in the red background. There was a correlation that the reading speed increased as the blinking rate decreased in all backgrounds and the best correlation was shown in the green background. Conclusions: From the results, a correlation between the increasing reading speed and the reducing blinking rate while reading paper book with same demand on accommodation and convergence was confirmed however, the change in blinking rate and reading speed was varied depending on the main wavelength of light. It might mean that the working speed and visual fatigue can be varied depending on the difference of main wavelength when doing near work. Thus, it can be suggested that the adjustment of working environment and conditions should be made according to the kind of required perception.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.542-547
• /
• 2015

Since the oil price has been significantly jumped for several years, a heavy oil of low quality has been mainly used in the diesel engine of the merchant ship. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, Inconel 625 filler metal were welded with GTAW method in the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. Furthermore, the corrosion current density of the weld metal zone revealed the lowest value, having the highest value of hardness. The corrosive products with red color and local corrosion like as a pitting corrosion were considerably observed at the base metal zone, while these morphologies were not wholly observed in the weld metal zone. In particular, the polarization characteristics such as impedance, polarization curve and cyclic voltammogran associated with corrosion resistance property were well in good agreement with each other. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the Inconel 625 electrode.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.304-312
• /
• 2005

Effects of two endocrine disrupters (EDs) , nonylphenol (NP) and diethylhexyl phthalate (DEHP), on the population growth and morphology of two freshwater HABs (harmful algal blooms) , Microcystis aeruginosa and Stephanodiscus hantzschii, which frequently evoked the hazard bloom in an eutrophic lakes and reservoirs worldwide, were examined with seven different concentrations of EDs (0.01, 0.05, 0.1, 1,2, 2.5 and 3 ppm). Even at concentration below 0.01 ppm, NP strongly inhibited the algal growth of both M. aeruginosa and S. hantzschii, regardless of the algal growth phase. Morphologically, the algal cell treated with NP gradually lost green color in cytoplasm, became smaller in cell size, and then, was hardly seen in microscopic field. On the other hand, DEHP employed did not affect two algae at all concentrations, and rather stimulated the growth by about 10% with a treatment at 3.00 ppm compared to control. These results indicate that the continuous input of EDs, DEHP into the natural water system plays a crucial role to enhance or help an outbreak of algal bloom in eutrophic waters.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.93-101
• /
• 2012

In the present study, egg development and early life history of Korean spined loach, $Iksookimia$ $koreensis$, were observed. Adult fish were sampled using spoon nets in Okgye-ri, Hoengseong-gun, Gangwon-do, Korea in July 2010. Eggs were obtained after injecting females with Ovarprim. Eggs were then artificially fertilized in the laboratory using the dry method. Mature eggs were slightly adhesive and transparent with a light yellowish color, and measured $1.40{\pm}0.04mm$ (mean${\pm}$SD) in diameter. Hatching of the embryo occurred approximately 50 h after fertilization in the water at $23^{\circ}C$, and newly hatched larvae were averaged $4.7{\pm}0.21mm$ in total length. 5 days after hatching, the averaged total length of larvae was $7.1{\pm}0.25mm$ and their yolk sacs had been completely absorbed. 17 days after hatching, fish started to enter the juvenile stage and reached $12.2{\pm}1.10mm$ in total length. 80 days after hatching, the band patterns and external form of juvenile fish were similar to those of adults, and they averaged $31.0{\pm}3.98mm$ in total length.

• Korean Journal of Ichthyology
• /
• v.29 no.4
• /
• pp.261-266
• /
• 2017

Microphysogobio koreensis is an endemic Korean freshwater fish that is protected as an endangered fish by the Ministry of Environment in Korea. In this study, we attempted to investigate the spawning period and spawning characteristics of M. koreensis to obtain basic information for its conservation. Though natural and histological observation, the spawning season occurred between April and May, with peak spawning occurred in early May when the water temperature was $20{\sim}23^{\circ}C$. During the spawning season, males had a bright-orange body and a thick red horizontal line from the rear of the operculum to the caudal peduncle, along with a lateral line, while females had a dark brown body. Nuptial organ had not appeared. The number of eggs in the ovaries was 10,705~22,165 ($15,573{\pm}4,274$). The number and appearance ratio of mature eggs were 1,100~5,920 ($3,383{\pm}2,126$) and 10.3~44.8% ($22.4{\pm}15.6$), respectively. And the size of mature eggs was 0.60~1.00 mm ($0.74{\pm}0.06$).