• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.371-380
• /
• 2017

PURPOSE. The aim of this study is to evaluate and compare the stress distribution in Locator attachments in mandibular two-implant overdentures according to implant locations and different loading conditions. MATERIALS AND METHODS. Four three-dimensional finite element models were created, simulating two osseointegrated implants in the mandible to support two Locator attachments and an overdenture. The models simulated an overdenture with implants located in the position of the level of lateral incisors, canines, second premolars, and crossed implant. A 150 N vertical unilateral and bilateral load was applied at different locations and 40 N was also applied when combined with anterior load at the midline. Data for von Mises stresses in the abutment (matrix) of the attachment and the plastic insert (patrix) of the attachment were produced numerically, color-coded, and compared between the models for attachments and loading conditions. RESULTS. Regardless of the load, the greatest stress values were recorded in the overdenture attachments with implants at lateral incisor locations. In all models and load conditions, the attachment abutment (matrix) withstood a much greater stress than the insert plastic (patrix). Regardless of the model, when a unilateral load was applied, the load side Locator attachments recorded a much higher stress compared to the contralateral side. However, with load bilateral posterior alone or combined at midline load, the stress distribution was more symmetrical. The stress is distributed primarily in the occlusal and lateral surface of the insert plastic patrix and threadless area of the abutment (matrix). CONCLUSION. The overdenture model with lateral incisor level implants is the worst design in terms of biomechanical environment for the attachment components. The bilateral load in general favors a more uniform stress distribution in both attachments compared to a much greater stress registered with unilateral load in the load side attachments. Regardless of the implant positions and the occlusal load application site, the stress transferred to the insert plastic is much lower than that registered in the abutment.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.369-375
• /
• 2015

Purpose: The current study was performed to estimate the changes in reading speed and blinking rate according to different background colors when reading paper book and further investigate their correlation. Methods: Twenty-nine adults (10 males, 19 females) who consented to the present study and had no ocular disease, ocular surgery history showing normal binocular vision were participated into the study. The subjects were asked to read the novels with black letter printed on white, red, green and blue background for 15 min, respectively. Then, the reading speed per page and blinking rate per page were measured during reading and analyzed according to background colors. Results: Reading speed per page according to the background color showed a tendency to accelerate in the white and green background as the reading time increased however, it was almost unchanged in the blue background and rather decelerated in the red background. On the other hand, the blinking rate per page tended to decrease in all background as the reading time was increased however, the smallest reduction was shown in the red background. There was a correlation that the reading speed increased as the blinking rate decreased in all backgrounds and the best correlation was shown in the green background. Conclusions: From the results, a correlation between the increasing reading speed and the reducing blinking rate while reading paper book with same demand on accommodation and convergence was confirmed however, the change in blinking rate and reading speed was varied depending on the main wavelength of light. It might mean that the working speed and visual fatigue can be varied depending on the difference of main wavelength when doing near work. Thus, it can be suggested that the adjustment of working environment and conditions should be made according to the kind of required perception.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.542-547
• /
• 2015

Since the oil price has been significantly jumped for several years, a heavy oil of low quality has been mainly used in the diesel engine of the merchant ship. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, Inconel 625 filler metal were welded with GTAW method in the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. Furthermore, the corrosion current density of the weld metal zone revealed the lowest value, having the highest value of hardness. The corrosive products with red color and local corrosion like as a pitting corrosion were considerably observed at the base metal zone, while these morphologies were not wholly observed in the weld metal zone. In particular, the polarization characteristics such as impedance, polarization curve and cyclic voltammogran associated with corrosion resistance property were well in good agreement with each other. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the Inconel 625 electrode.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.304-312
• /
• 2005

Effects of two endocrine disrupters (EDs) , nonylphenol (NP) and diethylhexyl phthalate (DEHP), on the population growth and morphology of two freshwater HABs (harmful algal blooms) , Microcystis aeruginosa and Stephanodiscus hantzschii, which frequently evoked the hazard bloom in an eutrophic lakes and reservoirs worldwide, were examined with seven different concentrations of EDs (0.01, 0.05, 0.1, 1,2, 2.5 and 3 ppm). Even at concentration below 0.01 ppm, NP strongly inhibited the algal growth of both M. aeruginosa and S. hantzschii, regardless of the algal growth phase. Morphologically, the algal cell treated with NP gradually lost green color in cytoplasm, became smaller in cell size, and then, was hardly seen in microscopic field. On the other hand, DEHP employed did not affect two algae at all concentrations, and rather stimulated the growth by about 10% with a treatment at 3.00 ppm compared to control. These results indicate that the continuous input of EDs, DEHP into the natural water system plays a crucial role to enhance or help an outbreak of algal bloom in eutrophic waters.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.93-101
• /
• 2012

In the present study, egg development and early life history of Korean spined loach, $Iksookimia$ $koreensis$, were observed. Adult fish were sampled using spoon nets in Okgye-ri, Hoengseong-gun, Gangwon-do, Korea in July 2010. Eggs were obtained after injecting females with Ovarprim. Eggs were then artificially fertilized in the laboratory using the dry method. Mature eggs were slightly adhesive and transparent with a light yellowish color, and measured $1.40{\pm}0.04mm$ (mean${\pm}$SD) in diameter. Hatching of the embryo occurred approximately 50 h after fertilization in the water at $23^{\circ}C$, and newly hatched larvae were averaged $4.7{\pm}0.21mm$ in total length. 5 days after hatching, the averaged total length of larvae was $7.1{\pm}0.25mm$ and their yolk sacs had been completely absorbed. 17 days after hatching, fish started to enter the juvenile stage and reached $12.2{\pm}1.10mm$ in total length. 80 days after hatching, the band patterns and external form of juvenile fish were similar to those of adults, and they averaged $31.0{\pm}3.98mm$ in total length.

• Korean Journal of Ichthyology
• /
• v.29 no.4
• /
• pp.261-266
• /
• 2017

Microphysogobio koreensis is an endemic Korean freshwater fish that is protected as an endangered fish by the Ministry of Environment in Korea. In this study, we attempted to investigate the spawning period and spawning characteristics of M. koreensis to obtain basic information for its conservation. Though natural and histological observation, the spawning season occurred between April and May, with peak spawning occurred in early May when the water temperature was $20{\sim}23^{\circ}C$. During the spawning season, males had a bright-orange body and a thick red horizontal line from the rear of the operculum to the caudal peduncle, along with a lateral line, while females had a dark brown body. Nuptial organ had not appeared. The number of eggs in the ovaries was 10,705~22,165 ($15,573{\pm}4,274$). The number and appearance ratio of mature eggs were 1,100~5,920 ($3,383{\pm}2,126$) and 10.3~44.8% ($22.4{\pm}15.6$), respectively. And the size of mature eggs was 0.60~1.00 mm ($0.74{\pm}0.06$).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.181-188
• /
• 2012

An effective extraction method for extracting a coated tongue is proposed in this paper, which is used as the diagnostic criteria in the tongue diagnosis. Proposed method uses the fluorescence response characteristics of the coated tongue that is occurred by using the ultraviolet light. Specially, this method can solved the previous problems including the issue in the limits of the diagnosis environment and in the objectivity of the diagnosis results. In our method, original tongue image is acquired by using the ultraviolet light, and binarization is performed by thresholding a valley-points in the histogram that corresponds to the color difference of tongue body and tongue coating. Final view image is presented to the oriental doctor, after applying the canny-edge algorithm to the binary image, and edge image is added to the original image. In order to evaluate the performance of the our proposed method, after building a various tongue image, we compared the true region of coated tongue by the oriental doctor's hand with the extracted region by the our method. As a result, the proposed method showed the average 87.87% extraction ratio. The shape of the extracted coated tongue region showed also significantly higher similarity.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.512-516
• /
• 2013

Pear cultivar 'Sinhwa' (Pyrus pyrifolia var. culta Nakai) was originated from a cross between 'Niitaka' and Whasan' with the aims of improving the fruit quality and the traits of cultivation and of early maturing more than 'Whasan' cultivar at Pear Research Station of National Institute of Horticultural & Herbal Science, Rural Development Administration in 1995. 'Sinhwa' was preliminarily selected in 2004 and named in 2009. The tree shows vigorous growth habit and semi-spread characters like 'Niitaka'. Furthermore, it has a sufficient and well upkeep of the flower bud, so it can be more easily cultivated in orchards. In the flower characteristics, flowering time of 'Sinhwa' is $11^{th}$ April like as maternal parent 'Niitaka'. Also 'Sinhwa' has short of pollen grains, so it is need above two pollinizer cultivars. 'Sinhwa' is highly resistant to black leaf spot (Alternaria kikuchiana) and relatively strong to pear scab (Venturia nashicola) in field condition. The optimum harvest time is around Sep. $15^{th}$ in Naju, which is ahead of 'Whasan' about 10 days in the harvest period. The fruit shape is oblate and fruit skin color is yellowish-brown during harvesting time. The average weight of fruit is 627 g, and the soluble solids content is $13.0^{\circ}Brix$. The flesh is very soft and juicy, and renders good eating quality. Shelf life is about 30 days under the room temperature condition.

• Korean Journal of Ecology and Environment
• /
• v.53 no.3
• /
• pp.275-285
• /
• 2020

Two specimens presumed to be hybrids of Rhodeus pseudosericeus and R. notatus were collected from the Sangcheon Stream of the Han River, Korea. The body color of natural hybrid individuals was yellowish brown, showing the intermediate characteristics of R. pseudosericeus and R. notatus, but overall, the characteristics of R. notatus were similar. Meristic and morphometric characters, the number of dorsal fin rays, anal fin rays and longitudinal row scales showed a hybrid index (HI) of 0, indicating the characters of R. notatus. The hybrid index of predorsal length (HI=74.6), preanal length (HI=75.3), and preventral length (HI=77.6) were similar to the characters of the R. pseudosericeus. Also four characters were appeared to have intermediate characters between R. pseudosericeus and R. notatus; number of gill rakers (HI=55.3), body depth (HI=67.9), snout length (HI=43.4), and inter orbital width (HI=44.8). The rest of 14 characters deviated between 0 and 100, showing unique characteristics of hybrid individuals. Recombination activating gene 1 (RAG1) analysis, hybrids were identified as natural hybrids due to the overlapping peaks of their parent species. Also, as a result of analysis using the cytochrome b gene (COB), one individual was derived from R. pseudosericeus, while the other was derived from R. notatus.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.34.2-35
• /
• 2018

Galaxy transition from star-forming to quiescent, accompanied with morphology transformation, is one of the key unresolved issues in extragalactic astronomy. Although several environmental mechanisms have been proposed, a deeper understanding of the impact of environment on galaxy transition still requires much exploration. My Ph.D. thesis focuses on which environmental mechanisms are primarily responsible for galaxy transition in different environments and looks at what happens during the transition phase using multi-wavelength photometric/spectroscopic data, from UV to mid-infrared (MIR), derived from several large surveys (GALEX, SDSS, and WISE) and our GMOS-North IFU observations. Our multi-wavelength approach provides new insights into the *late* stages of galaxy transition with a definition of the MIR green valley different from the optical green valley. I will present highlights from three areas in my thesis. First, through an in-depth study of environmental dependence of various properties of galaxies in a nearby supercluster A2199 (Lee et al. 2015), we found that the star formation of galaxies is quenched before the galaxies enter the MIR green valley, which is driven mainly by strangulation. Then, the morphological transformation from late- to early-type galaxies occurs in the MIR green valley. The main environmental mechanisms for the morphological transformation are galaxy-galaxy mergers and interactions that are likely to happen in high-density regions such as galaxy groups/clusters. After the transformation, early-type MIR green valley galaxies keep the memory of their last star formation for several Gyr until they move on to the next stage for completely quiescent galaxies. Second, compact groups (CGs) of galaxies are the most favorable environments for galaxy interactions. We studied MIR properties of galaxies in CGs and their environmental dependence (Lee et al. 2017), using a sample of 670 CGs identified using a friends-of-friends algorithms. We found that MIR [3.4]-[12] colors of CG galaxies are, on average, bluer than those of cluster galaxies. As CGs are located in denser regions, they tend to have larger early-type galaxy fractions and bluer MIR color galaxies. These trends can also be seen for neighboring galaxies around CGs. However, CG members always have larger early-type fractions and bluer MIR colors than their neighboring galaxies. These results suggest that galaxy evolution is faster in CGs than in other environments and that CGs are likely to be the best place for pre-processing. Third, post-starburst galaxies (PSBs) are an ideal laboratory to investigate the details of the transition phase. Their spectra reveal a phase of vigorous star formation activity, which is abruptly ended within the last 1 Gyr. Numerical simulations predict that the starburst, and thus the current A-type stellar population, should be localized within the galaxy's center (< kpc). Yet our GMOS IFU observations show otherwise; all five PSBs in our sample have Hdelta absorption line profiles that extend well beyond the central kpc. Most interestingly, we found a negative correlation between the Hdelta gradient slopes and the fractions of the stellar mass produced during the starburst, suggesting that stronger starbursts are more centrally-concentrated. I will discuss the results in relation with the origin of PSBs.